One thing i noticed that may be an issue. On the LM2 the stepper motor is up and out of the way. On the LM3 it looks like the stepper motor may be in the work area. The limit switches have actually helped reset its location. The assembly time looks to be simplified from a few hours to a few minutes. LM3 has wifi which is a bonus, and looks like better cable management, lm2 cable can sometimes hit/move the piece if its light enough.
So, did put it together following this video and , while not 100% engineered to put together that easily, it took me about an hour. Some adjustments to me would be a few changes in procedures.. The biggest worry I gave is that the power cable was put in upside down so I had to twist the cable 180 degrees and now it is a bit tighter than I'd like it to be. As well, you are putting on the tracks blind, thus took some real finessing till I finally got it in and ok..another issue is that my tracks actually self inserted to the main laser housing without me having to out them in. Thankfully I was kind and did not pull the housing hard. The set screw for the track tensioner should be inserted earlier in the process as they are small and the allen key is long and you had to be careful not to tangle in the track. The wiring could be secured better. Seems a bit wonky to me, but it does work. BE CAREFUL!!! I almost threw out the Z alignment screw and the air assist with the packaging. I only saved myself grief as I went back to the garbage for the laser bag to put my laser unit securely away, and found them there. Whew...saved me having to call support. Overall.. a gorgeous unit. Video is 90% complete to me..rushes over some steps, but worth watching..
Hello. Amazing video and has helped me setup my new machine. Just a question on the circuit group cable. Is it advisable to leave it loose or cable tie it to the unit? Many thanks.
I also noticed some photos of extendable legs for raising the unit. In other pictures they are absent. Are they included with the machine? Very excited about this machine. The design is pretty sleek.
Yes, ORTUR lasermaster3 will launch the bracket, it is currently in production, it is expected to be launched around July 15th, it can be purchased separately or together with the machine.Suitable for more engraving conditions.
Hi, maybe you can send a situation where you are having problems to this email address: support@ortur.net Our professional after-sales staff will be happy to solve your problem!
What is the overall footprint and weight? I have a tall racking type shelf that I have various machines in just over each other to compare how efficiently and quickly they run. Just wondering if one would fit into the last shelf that I had been using for consumables.
I suspect that was the idea. The XTool D1 is taking the market by storm…setting the need to move to better technology. Pity that linear rails are not being used more by all the laser makers…much more efficient that rubber belts!
![Baby Kia - GLOVES & DRACS (BLACK AF1s) [Official Music Video]](http://i.ytimg.com/vi/ajm8LeB0qQk/mqdefault.jpg)
I ordered one. Now I wait. I'm really looking forward to this. Now it's here and it is a beautiful work of art.
Wow, this machine looks sleek. Great job on the quick assembly kit. I love it!
One thing i noticed that may be an issue. On the LM2 the stepper motor is up and out of the way. On the LM3 it looks like the stepper motor may be in the work area. The limit switches have actually helped reset its location. The assembly time looks to be simplified from a few hours to a few minutes. LM3 has wifi which is a bonus, and looks like better cable management, lm2 cable can sometimes hit/move the piece if its light enough.
So, did put it together following this video and , while not 100% engineered to put together that easily, it took me about an hour. Some adjustments to me would be a few changes in procedures..
The biggest worry I gave is that the power cable was put in upside down so I had to twist the cable 180 degrees and now it is a bit tighter than I'd like it to be. As well, you are putting on the tracks blind, thus took some real finessing till I finally got it in and ok..another issue is that my tracks actually self inserted to the main laser housing without me having to out them in. Thankfully I was kind and did not pull the housing hard. The set screw for the track tensioner should be inserted earlier in the process as they are small and the allen key is long and you had to be careful not to tangle in the track.
The wiring could be secured better. Seems a bit wonky to me, but it does work.
BE CAREFUL!!! I almost threw out the Z alignment screw and the air assist with the packaging. I only saved myself grief as I went back to the garbage for the laser bag to put my laser unit securely away, and found them there. Whew...saved me having to call support.
Overall.. a gorgeous unit. Video is 90% complete to me..rushes over some steps, but worth watching..
That looks so much smarter than the 2 I recently received for testing and review. I'm betting this would be far superior to the Atomstack A5 Pro.
4:26 you can’t plug that cable with that side. That’s why video cut in that point
Hello. Amazing video and has helped me setup my new machine. Just a question on the circuit group cable. Is it advisable to leave it loose or cable tie it to the unit? Many thanks.
If what you mention is the cable linking the laser module, we recommend that it can be fixed without affecting the use of the machine.☺
I also noticed some photos of extendable legs for raising the unit. In other pictures they are absent. Are they included with the machine? Very excited about this machine. The design is pretty sleek.
Yes, ORTUR lasermaster3 will launch the bracket, it is currently in production, it is expected to be launched around July 15th, it can be purchased separately or together with the machine.Suitable for more engraving conditions.
You need to buy as an add on..
Omg the music.
Don’t forget the micro SD card!!!
peut faire de la découpe de papier vinyl (stickers)?
Yes! Of course! You can know more about the machine from this link: ortur.net/en-en/pages/materials-reference 😉
初めまして。
Orter laser master3を使用しているのですが、1回レーザーの指定で使用すると折り返しでもう一度レーザー印字されぶれてしまいます。
折り返しでにレーザーをやめる事はできますか？
Hi, maybe you can send a situation where you are having problems to this email address: support@ortur.net
Our professional after-sales staff will be happy to solve your problem!
أريد واحدة كم تبلغ من السعر والشحن
It's $429.99 and free shipping.
Please check ortur.net/products/ortur-lm3-laser-engraving-cutting-machine-20-000mm-min-10w
I may have missed it…but does this new machine have endswitches? Aka endstops in the 3D world.
OLM3 has no limit switch, automatic reset, has Y/YRR mode switch and safety key
can it cut on clear/transparent acrylic sheets? or at least with the paper masking?
You need to use opaque stickers to cover the clear acrylic sheet. Like this video
ruclips.net/video/G2evV3Kqqbc/видео.html
What is the overall footprint and weight? I have a tall racking type shelf that I have various machines in just over each other to compare how efficiently and quickly they run. Just wondering if one would fit into the last shelf that I had been using for consumables.
Machine Size:580*550*150mm,Gross weight:6.5KGS
@@orturnet Thank you.
Can outur engrave acrylic
sure
Do you ship to India
Sorry, can not
Does the LM3 have an extension kit?
Sure, it's expected to be released in August, you can see it live on the facebook ortur official user group.
Does this fit into the LM2 enclosure?
Hello, OLM3 and LM2 shell are not suitable, LM2 can be upgraded by installing the latest 10W LU2-10A Laser model.
Looks alot like Xtool
The ORTUR Laser Master series uses a new design and features many upgrades.
I suspect that was the idea. The XTool D1 is taking the market by storm…setting the need to move to better technology.
Pity that linear rails are not being used more by all the laser makers…much more efficient that rubber belts!