I have had this machine at home for less than a week and I am very satisfied with its performance and ease of use. And perhaps the best of all has been the personalized attention of its creator Ferdinando.
5:35 Nah, it's not just you. Building is a huge part of the fun for lots of people, including me. Although so far, Balsa is still my preferred way. Ribs are cool ( :
Thanks, I'm sure it will be fine it's just a matter of getting the right voltage to the wire to suit the foam. Unfortunately, I have never cut EPP because it's quite difficult to get in the UK in any suitable sizes. I mainly use EPS and XPS foam.
Hi Keith, Thank you so much for all your explanation and videos. I m just building your machine, mostly finished and i just discover you have build a new Bow for the wire. Do you more fotos of it somewhere ? Great Job anyhow, happy building and flying !!
Hi Wily, I'll take some pictures and post them on the website with the dimensions. I will send you an update when I have them. I don't have any useful ones right now.
@@rckeith Thank you very much - you male lot of explanations, mote than i was expected - Perfect now it s clearer. I finishe d mine today, expect the 2 T8 leading screw missing. I finally adopt for lot of 3D print, i had laready all your wood pieces ready for my cnc, as i found some 3D files from Patrick Bartl - but i add to correct (or adapt) some stuff and create some new one. For the choice of the SW i look at you r video explanation, also a great help to find the right SW . i wll send you later on results.
Very nice! I'm in the process of designing three larger machines using printer extrusions and belt drives instead of screws....basically a 1 1/2 meter cube. I'm leaning towards running NEMA 24 motors for several reasons, but can't seem to find any more info on the Hobbild site. Can the DB-15 connectors handle the larger motors? We do have a CNC mill with a Gecko controller running NEMA 24's through a DB-9, but it's hard on the connectors. Already running DevFoamPro2 and love it. Any more info available from Hobbild? Guess I'll have to try and contact directly? Thanks.
Looks like a good controller for someone that just wants a plug and play setup. I've been enjoying my setup built from your plans. I see your using the devfoam to send your cut files here. Are you exclusively using this now or still using the grill hotwire mega 5x? I might have to try devfoam as I can't get the mega 5x to connect the port on 24v.
This unit can cut any shape 2D or 3D. And olso a large spher of 36 to 48 inches. Please confirm. .where are you. .and the price..Also the total size of the unit in L×B×H....please. .
Hi Ciaran! I make these drivers as a hobby in my spare time, so I don't do it as my main job. For this reason the prices are not showed in the site. If you want to know the prices or you just have some questions don't hesitate to contact me by e-mail
I have had this machine at home for less than a week and I am very satisfied with its performance and ease of use. And perhaps the best of all has been the personalized attention of its creator Ferdinando.
Hi Matias, yes it's very good and Ferdinando has been very helpful.
Hi Matias! You did very well for running the machine and the program in no time, great job!
Where did you buy bro?
Impressive results. Thanks for the through demo.
Looking forward to seeing your upcoming build series project with this cutter in action. :)
Thanks
5:35 Nah, it's not just you. Building is a huge part of the fun for lots of people, including me. Although so far, Balsa is still my preferred way. Ribs are cool ( :
Thank you very much for your videos with my classmates we are going very well for our final university project.
Hi Keith, great video and thank you for your professional feedback!
Thank you. It's a great controller and works fantastic 👌
Excellent video. Thank you. How does well does the controller work with EPP foam? Any differences?
Thanks, I'm sure it will be fine it's just a matter of getting the right voltage to the wire to suit the foam. Unfortunately, I have never cut EPP because it's quite difficult to get in the UK in any suitable sizes. I mainly use EPS and XPS foam.
Great thank you Keith all the best from Hookey tootgarook Australia enjoy life while your yong😊😊
Hi Keith, Thank you so much for all your explanation and videos. I m just building your machine, mostly finished and i just discover you have build a new Bow for the wire. Do you more fotos of it somewhere ? Great Job anyhow, happy building and flying !!
Hi Wily, I'll take some pictures and post them on the website with the dimensions. I will send you an update when I have them. I don't have any useful ones right now.
Hi Willy some info and pictures on the website rckeith.co.uk/hot-wire-bow-for-foam-cutting/
@@rckeith Thank you very much - you male lot of explanations, mote than i was expected - Perfect now it s clearer. I finishe d mine today, expect the 2 T8 leading screw missing. I finally adopt for lot of 3D print, i had laready all your wood pieces ready for my cnc, as i found some 3D files from Patrick Bartl - but i add to correct (or adapt) some stuff and create some new one. For the choice of the SW i look at you r video explanation, also a great help to find the right SW . i wll send you later on results.
Really like this, the prices aren't overly high tbh.
Good job you did a video as their site isn't the best imo (perhaps as I'm learning?)
Thanks glad it helps.
Very nice! I'm in the process of designing three larger machines using printer extrusions and belt drives instead of screws....basically a 1 1/2 meter cube. I'm leaning towards running NEMA 24 motors for several reasons, but can't seem to find any more info on the Hobbild site. Can the DB-15 connectors handle the larger motors? We do have a CNC mill with a Gecko controller running NEMA 24's through a DB-9, but it's hard on the connectors. Already running DevFoamPro2 and love it. Any more info available from Hobbild? Guess I'll have to try and contact directly? Thanks.
Hi I'm not sure if that is possible but you can contact them at info@hobbild.com
Looks like a good controller for someone that just wants a plug and play setup. I've been enjoying my setup built from your plans. I see your using the devfoam to send your cut files here. Are you exclusively using this now or still using the grill hotwire mega 5x? I might have to try devfoam as I can't get the mega 5x to connect the port on 24v.
Hi, Still using Mega 5x and DevCNC Foam as well. Not doing much foam cutting at the moment as other projects are taking my time.
This unit can cut any shape 2D or 3D. And olso a large spher of 36 to 48 inches. Please confirm. .where are you. .and the price..Also the total size of the unit in L×B×H....please. .
Please contact Hobbild.com for this information. I only use it. I don't make it.
may I order one machine?
Check with Hobbild.com
I so not see the price of the pc boards or full box
Costs are here in the video ruclips.net/video/eY21hR9O0i8/видео.html
Hi Ciaran! I make these drivers as a hobby in my spare time, so I don't do it as my main job. For this reason the prices are not showed in the site. If you want to know the prices or you just have some questions don't hesitate to contact me by e-mail