Calibration of the LPG OPTIMA SYSTEM in 5 minutes | Autogas ALEX
HTML-код
- Опубликовано: 4 окт 2024
- Thanks to advanced algorithms, ALEX OPTIMA autogas installations can be tuned in record time. In this video you will see how to quickly calibrate the gas installation settings in the OPTIMA program.
Technical support:
Paweł Sołtys, Piotr Makarewicz
email: service@autogas-alex.com
tel. +48 577 500 922 (Telefon/Whastapp/Skype/Viber/Telegram)
🔹 alexlpg.com/
🔹 autogas-alex.c...
🔹 /
🔹 / autogas_alex
Good video. I'd love to see what the corrections are for gas temperature and gas pressure. Where can is see those? And how much are they?
Hi Jochen! If you have any questions related to the installation of our products, please contact our technical department directly :) service@autogas-alex.com or +48 577 500 922 (Telefon/Whastapp/Skype/Viber/Telegram)
@@autogas_alex OK, Ill sent you an email. thank you
@@autogas_alex I have sent an email 5 days ago. But have not gotten a reply so far.
Does this software allow me to edit the petrol injectors incase I wanted to lean out my petrol fuel map a little bit? Thanks.
ALEX technical support is only available for trained workshops. In case of any questions or problems with the LPG system, please contact your installator directly.
Where can i find an approved service for this lpg system in Romania?
Please contact Irena Goraczko: irena.goraczko@autogas-alex.com - she will provide all necessary information ☺
hello.can this software be used on another ecu?
Does a mechanic valve lifter engine need valve clearance with lpg install?
You have to adjust the valves on petrol and autogas.
If mine is 0.6 ms, is it better than 0.8 ms?
Please clarify what exactly you mean by that. Are you asking about an idle correction?
@@autogas_alex Yes, the idle speed, you wrote in one of the videos that it should be between 0.6-0.8 ms. My nozzle is 2.3mm and my difference is 0.6ms.