When you replaced the tire. You took out the 8 Motor Bolts. Slid the wheel out. And replaced the tire? Can you detail your process? I need to do a tube change with the street tire.
U can do this! 4 small screws and bigger screws at the top of the battery that connects to the top part. Then u can open up the battery cases like I show in the videos… after that u can lose up the motor cable and then remove the axle bolts and pull out the motor! When i change the tire again i will make a detailed footage for u!
Great video once again, now that is an off road tire, I love it, what is the width once inflated? I put something like that on a T4 but didn’t have the clearance to run it.
Thanks! I did cut abit off the side knobs away because it was 85-90mm wide so it’s better for 70/100 wide tire for T4 maby? Make sure it is soft compound otherwise it’s hard to ride in the middle of the profile… if it’s possible get a rear tire but in 70/100 hard to find!
@@MisterBanaszak great job, I haven’t checked but I guess the Patton is the same clearance width as the T4, I would love to find a tire like that for the Patton for winter.
@@scottmorris7320 the x grip is nice or search for 80/100 rear tire and soft compound! Today we tested it on insane hills really steep and it went up very high !
Yes sure a Lynx can take 80/90 -14 But for a dirtbike tyre it needs to be like 70/100 or 80/100 but I don’t know if the fender needs to be trimmed… I did not yet do this! I got a Lynx myself so will upload videos soon about it…
thanks for the testing in the wet. i want to buy one but i wasn't sure if it does well in the rain, but sofar so good? hope it will last a couple of months with no water damage
Yes I ride a lot of different EUC’s from early gotway wheels and it’s pretty good water resistance build but time will tell… Battery are wrapped so that’s good compared to s22 because it is bad for water prooofing!
When you replaced the tire. You took out the 8 Motor Bolts. Slid the wheel out. And replaced the tire? Can you detail your process? I need to do a tube change with the street tire.
U can do this! 4 small screws and bigger screws at the top of the battery that connects to the top part. Then u can open up the battery cases like I show in the videos… after that u can lose up the motor cable and then remove the axle bolts and pull out the motor! When i change the tire again i will make a detailed footage for u!
Hi I’m now uploading the tire change and teardown video for u with a full guide how to do it… 😉
That seems like an excellent solution for the muddy season! Congrats.
Yes perfect for off-roading and no more slides! 😉
Great video once again, now that is an off road tire, I love it, what is the width once inflated?
I put something like that on a T4 but didn’t have the clearance to run it.
Thanks!
I did cut abit off the side knobs away because it was 85-90mm wide so it’s better for 70/100 wide tire for T4 maby? Make sure it is soft compound otherwise it’s hard to ride in the middle of the profile… if it’s possible get a rear tire but in 70/100 hard to find!
@@MisterBanaszak great job, I haven’t checked but I guess the Patton is the same clearance width as the T4, I would love to find a tire like that for the Patton for winter.
@@scottmorris7320 the x grip is nice or search for 80/100 rear tire and soft compound! Today we tested it on insane hills really steep and it went up very high !
@@MisterBanaszak cool, I hope you show us on your next video, how does the mini compare to the Patton for torque on those steep hills?
@@scottmorris7320more then enough torque! We did some extreme vs mini hills also… mini is strong wheel!
Hey buddy, can you please let me know what size of x-grip tire I need to buy for the Lynx, please? Thank you very much.
Yes sure a Lynx can take 80/90 -14
But for a dirtbike tyre it needs to be like 70/100 or 80/100 but I don’t know if the fender needs to be trimmed… I did not yet do this! I got a Lynx myself so will upload videos soon about it…
@@MisterBanaszak Thank you very much! Can't wait for the Lynx video!
Bonjour, est-ce que ce pneu est un bon pneu pour tous les jours ? Offroad et ville .merci
Take the original for everyday use!
Do you know if the Patton has same issue with mud piling on the suspension and is it fixable also?
I think it’s fine but also open design like the mini so it would benefit to make a mudguard for the shocks
But I think it has abit of a plastic guard allready… u should check the teardowns of it maby?
Do u know a great tire for the t4? And a Mudgard upgrade😅
Is the T4 as wide as this one? What terrain do u ride the most?
For me it’s 90% off-road so…
I never saw or rode the T4 🥲
thanks for the testing in the wet. i want to buy one but i wasn't sure if it does well in the rain, but sofar so good? hope it will last a couple of months with no water damage
Yes I ride a lot of different EUC’s from early gotway wheels and it’s pretty good water resistance build but time will tell…
Battery are wrapped so that’s good compared to s22 because it is bad for water prooofing!
Nice job, thx for the video! How does it feel onroad compared to the original tyre?
Yeh u can’t carve with it and u need to not push it in corners but it has good grip with the soft compound… if u do roads alot I do not recommend!
Verry low tire pressure. But nice tire
Yeh I increased it after that ride!