Yeah it’s a really good Ak.. do some research on it (I’m sure you have but incase you haven’t) they are some of the best quality aks and the price isn’t bad at all. I’m probably going to purchase another one sometime
Yes they do…that’s what I meant to order.. you get to choose that at checkout .. I ordered the wrong side 😩 but I still like it .. once you get this brace you won’t wan to fire it folded anymore anyways tho.
@@connorvargo pretty sure I say it in the video . Think I picked right hand thinking it would fold to the left so you can use your right hand.. but nope whatever side you select is the side it will fold to. Even the way this is tho you can still shoot with it folded
Completely by accident.. if I did it again I would pick differently.. I thought right hand folding meant you would be able to use your right hand and folds left lol. But next time I’ll order a left hand folding.
@@KayoMonei you should because once you put the brace on you’ll never want to take it off.. you can get really good groups at 100 yards with the brace.. good luck hitting that far without it on.
I wish I picked that one up.. this one fits really good, but I woulda rather a straight bolt on.. I didn’t know what options to pick and didn’t wanna risk getting the wrong one so I went with what I knew would work.. there wasn’t an easy worded option that said “hole mount” so just with with the rail
The bolt one gets stuck open & you can’t remove it until it looses up to fold which can be hours later. If the screw comes loose while shooting the brace is loose wobbling and hard af to remove. If you set it up in a folded manner for your gun case just leave extra space for when it won’t fold. This might be their better option.
@@Mr_P_Rockzz right on, please keep dropping the rawest reviews on RUclips, I love that your content is honest and is not overproduced or paid for, you’re my favorite GunTuber!!!
@@MaddieLivingston42069 that means lots for my little channel !! I’m trying to post everyday, but at the same time I don’t wanna just post dumb stuff. I’ll be putting up some new guns soon
will the RH one allow you to still shoot and the bolt carrier clears the top of it when folded/what about the safety? isnt that why most people get the left sided one? But I'm left handed so the right one would be better if the gun still runs with it folded in the Right hand configuration.
Yes you can fire it sits below the charging handle so it will cycle .. now it will be hard to reach the trigger through the brace.. but if you use your left hand on the trigger it will be perfect
@@Mr_P_Rockzz ok thanks. With the Booster on, i can barely get it to fit in my carry bag when traveling. If I can take that booster off and shoot it safely, it would easily fit in my bag.
@@ElPotrillo_1911 just depends on your model.. if you have a Zastava, centry arms , or arsenal Ak when you order your brace you will select the correct model… you go to CncWarrior. Com then select what side you want the brace to fold and then you also pick what type of attachment you need for your model.. you can attach it right to your Ak if you have a hole in the back.. or you can attach it to a 1913 rail like I did.
@miguelgonzalez8972 mine was pretty fast.. I’m prettt sure I say how long it took in the video .. but if I can remember it was like two weeks .. total since they had it in stock ..
Serbia 🇷🇸 depends.. you can get it low as $850 online … I paid $988.00 for mine.. but my model was the A model with the 1913 rails on already. You can get on literally any website.. gunbroker, budsgunshop, grabagun, and many more if you just google the gun
i was looking at jmac customs braces but got confused by the adapters and mounts.. what mount/adapter did you select? the "ak pistol" option? i was iffy because the ak pistol option says "(fits most)" and was completely unsure which mount i would need for the zpap92
For this one you need a 1913 pic rail adapter since it already as the rail attachment… if yours doesn’t have a rail you would just pick the attachment that works for Draco or any other Ak with just a hole in the back … if you have no rail and no hole that’s gonna be suck because you would have to drill a hole in yours
@@BlackGoldSoul it’s been awhile but I don’t thinks so.. looks like I used the original one.. can order one for like less then a dollar off Zastava website or anywhere prob
@@Mr_P_Rockzz ok so I just got mine but it came with the jam screws already in there. I can get it to turn like you did in this video so I can screw it on. It is very tight and I can figure out how to get the jam screws out in order to turn it. Did you go through this?
The one I got is called dog leg rail Gen 3 for the zpap92 … not able to share a link on here for some reason:/ should be easy to find just go on the website Texas Weapons systems click the rail and it will tell you the exact models it fits .. or it will have you select your model
I went to the range yesterday and did not try it folded..with this right side fold I would not recommend… it is a really tight to get your finger into the trigger while folder.. it can be done if needed but wouldn’t be comfortable… if you order the left folder I would 100 percent recommend shooting folded… this right side can be done, but you prob wouldn’t be accurate or comfortable doing it
Hmm not sure what you are saying.. if there is a brace on it then there is prob a hole in the rear holding the brace? Remove the brace and should see the hole.??
@@Mr_P_Rockzz I apologize. The back of the ak pistol does not have a place for a hole to add the adapter. It came with a brace already with the extra extension piece by the pistol grip. Do I drill a hole in order to install??
@@cryptonomad.8656 oh I understand now.. it’s the kind that uses the grip to mount… yeah then you would need to have a hole in the rear to mount it straight on or to add a 1913 rail on.
@@cryptonomad.8656 it’s just like drilling anything if you have a good drill..just take your time and make sure that the hole is center.. I’ve seen videos on it, but not sure how to tag you in one.. but taking it somewhere to get don’t shouldn’t cost too much.. just make sure you order the right brace website had lots of different mounting options to choose from.
@@farewellvoyager5379 cool I’ll get those measurements when I get off work.. that length of pull it’s kinda strange not sure why that would even matter to them. I get the brace and stock barrel lengths and total length, but that trigger one is weird.
@@Mr_P_Rockzz apparently the max length of pull allowed on an SBR/pistol with brace (depending on the pending litigation) is 13.5 inches. Just another random number they pulled out of thin air. One last question for you about the brace: is there any qd sling mounts or anything like that?
Idk if you should be adding a recoil pad onto a”brace” they might come after you saying it’s a stock now. Also if it is on an Ak there really isn’t much recoil anyways.. but to your question I don’t know never looked for one
The one I ordered did not..my Ak already had it.. when I ordered I selected the option that allows you to mount onto a rail.. if you don’t have a rail you can select a few options on how you wanna mount it.. hopefully you at least have a hole drilled into the back of yours or will be so much more work for you.
I got a mini Draco I been thinking of selling it and getting this one so u think it’s worth it please anyone answer lol I been in a loop and when I ask my girl she says why sell my gun to buy the same one so she ain’t helping me lmfao
Zastava to me is the best in my opinion.. but I actually want to buy a mini draco myself .. either way you can’t go wrong.. the micro draco you can make super cool also.. you can change out that wooden hand guard for some nice tactical and also add this exact brace onto it . Depends what you want .. I hear the draco isn’t as reliable but idk to me if I had a draco idk just fix it up nicely..
@@Mr_P_Rockzz it will loosen up on shooting it but i haven't had it loosen at all since I put mine on but I haven't tried to take it off for any reason either so that might be a pain
I just got my ZPAP92 and it has the hole in the backplate but no bolt. Do you know what size I need in order to install the brace? It’s just an empty hole in my ZPAP 😂
Weird you would get it with just an empty hole.. but you can go on Zastava website and get the Bolt and rail cheap.. I couldn’t find much info on the size though.. sure any good bolt that you can fit in it should work though..
That would be true if you added a stock, although it looks like a stock this is a brace so no need to SBR it.. although with the dumb ruling now I’m going to SBR it anyways
I think it just depends if n the model you get.. my was simple .. it was not welded on.. there is a little button on the tip of the barrel and you just push in then you are able to screw it off.. luckily this was a easy one to take off.. so that are welded have to break the welding off
@@Mr_P_Rockzz Live In Pennsylvania. So far they havent but they have brought up a few bans. Glad they never passed. It looks like we are winning and maybe if atf continues to do its silly little grabs that dont make any sense they allow it and later on take it away. they will loose the battle in hassling people in the end. They dont seem to understand do not infringe. I know you seem to have alot more freedom in Texas as I know a friend from there to. Wish all states had it that good.
@@JayTX. idk these other states aren’t like Cali.. most people have like two weapons with braces.. don’t think they would put up with that. Weapons are made so we can fight the gov if needed .
Wouldn't it be better folding to the left, your trigger is blocked for a right hand shooter? Looks Awesome. Thanks for sharing your installation video. Masonry Plus Florida DeSantis Strong Trump Trump Trump
Yeah when I ordered it and it said “right hand” I assumed that it would fold to the left so you would be able to use your right hand.. woulda been cooler if I got the other, but I’m happy with.
Haha ! Nice man! Would be cool to be able to uses while closed ! It is what it is.. man idk about you, but to close the brace is extremely hard sometimes have to push it agains my leg it a table just to get it closed
@@tedr.richardson4655 yeah they are loaded mostly, but if I have loaded mags in the video or say I have loaded mags In the videos RUclips doesn’t like that and people like to complain
How tf anyone live with the fire alarm beeping like that like literally every 2 min😒 I made it 3 min in and I can’t take it.. naa man I can’t watch this shit another min.
You should really change the battery on that smoke detector. Safety first
Yeah I know ! Thanks tho!
That’s funny, how the heck did you notice that?
Lol I was going around my house until I realized it was his .
Legend has it the battery has yet to be changed.
Love that rocket booster muzzle-device on the end of the weapon. Good for directing the fireball downrange 🔥
Yes it is! I have lots of cool pictures if it making flames just like my cover photo
This low key was the best install I’ve seen of this brace on the zpap 💪🏾😂😂
Thanks! It Was my first time doing it! I was trying to make it simple as possible since I haven’t seen any good showing detailed videos on it.
That triangle brace is nice man it looks perfect
@@BrandonBuckinghamClipss thanks!!
Don’t forget to replace batteries for your smoke detector.
Thanks!!
Why would you not get the more solid direct mount over the silly picitinny mount style ?
Which is the direct mount?
Because I already had a rail on it… extremely stable. Don’t regret it ..
I wasn't a big fan of my Krinks Muzzle either but with the brace it looks pretty rad 😎 👌
Thanks!!
Looks good man. I think I just decided what my first firearm will be.
Yeah it’s a really good Ak.. do some research on it (I’m sure you have but incase you haven’t) they are some of the best quality aks and the price isn’t bad at all. I’m probably going to purchase another one sometime
Love it!!! M92 salute!
Where did you spruce this from?? I wish it swung out left… 😮
Do they make one that folds to the other side so it can be fired while folded and not interfere with the charging handle/bolt carrier?
Yes they do…that’s what I meant to order.. you get to choose that at checkout .. I ordered the wrong side 😩 but I still like it .. once you get this brace you won’t wan to fire it folded anymore anyways tho.
Did you get the right hand one? I’m trying to figure out if “left hand” means it’ll fold on the left that way I can still use it while stock is folded
@@connorvargo pretty sure I say it in the video . Think I picked right hand thinking it would fold to the left so you can use your right hand.. but nope whatever side you select is the side it will fold to. Even the way this is tho you can still shoot with it folded
I want one for my 🇷🇴 made Dracos but I just can’t bring myself to drill a hole into my rear trunnion.
It’s worth it. Just don’t mess up make sure you do all your measurements right … so much better to shoot with the brace then without ..
Buying this for my PAP92 now that the pistol brace rule is temporarily gone. Anyways, I wanna be cool like you when I grow up 👌
Get one they are super cool!
Just curious why you didn't get the one that swings the other way so you could still shoot it while the brace is folded in?
Completely by accident.. if I did it again I would pick differently.. I thought right hand folding meant you would be able to use your right hand and folds left lol. But next time I’ll order a left hand folding.
@@Mr_P_Rockzz thanks just ordered the left for mine 🤫 😅
@@KayoMonei nice!! You are going to love it!
@@Mr_P_Rockzz thanks haven’t even shot it yet I might shoot it without the brace just for kicks and giggles at first then slap the brace on there
@@KayoMonei you should because once you put the brace on you’ll never want to take it off.. you can get really good groups at 100 yards with the brace.. good luck hitting that far without it on.
Should use a tiny bit of locktite im pretty sure so the screws dont back thread
Yea for sure!!
Do you have the link for this brace i already have the 1913 on the back on my Zpap just need a brace that’s all
@@Lifewithwu don’t think I can put links on here but it’s just cNC Warrior website
@ what cbc one is it ?
Love it ! Makes it look good!
How come you didn't buy the CNC brace for m92 with no 1913 adapter. The make one that goes with the hole drilled in the back.
I wish I picked that one up.. this one fits really good, but I woulda rather a straight bolt on.. I didn’t know what options to pick and didn’t wanna risk getting the wrong one so I went with what I knew would work.. there wasn’t an easy worded option that said “hole mount” so just with with the rail
Oh I see. Just call them next time sometimes there is trial And error involved with AKs
The bolt one gets stuck open & you can’t remove it until it looses up to fold which can be hours later. If the screw comes loose while shooting the brace is loose wobbling and hard af to remove. If you set it up in a folded manner for your gun case just leave extra space for when it won’t fold.
This might be their better option.
Good to know !
Where can I order this back piece from 1:44 ?
I’ll tell you if you subscribe.. Jk ! you can get it off of the Zastava website for like $10-$20
Bruh you gonna register all your braces? Shhhhhh ATF is reading this…… 😅
@@MaddieLivingston42069 I’m not going to register anything, but I’ll take them off until the whole scam gets turned over.
@@Mr_P_Rockzz right on, please keep dropping the rawest reviews on RUclips, I love that your content is honest and is not overproduced or paid for, you’re my favorite GunTuber!!!
@@MaddieLivingston42069 that means lots for my little channel !! I’m trying to post everyday, but at the same time I don’t wanna just post dumb stuff. I’ll be putting up some new guns soon
i just order the same one with the pic rail. how is it so far. any issues?
No issues at all still my fav and will never change it out …going to keep it on forever
will the RH one allow you to still shoot and the bolt carrier clears the top of it when folded/what about the safety? isnt that why most people get the left sided one? But I'm left handed so the right one would be better if the gun still runs with it folded in the Right hand configuration.
Yes you can fire it sits below the charging handle so it will cycle .. now it will be hard to reach the trigger through the brace.. but if you use your left hand on the trigger it will be perfect
Can you shoot this without the booster on the tip?
Yes you can … I did all the time… just be careful because the treads can rust easy with out a cover
@@Mr_P_Rockzz ok thanks. With the Booster on, i can barely get it to fit in my carry bag when traveling. If I can take that booster off and shoot it safely, it would easily fit in my bag.
@@Mr_P_Rockzz did you lose any accuracy?
@@generationofbmx yeah I took it off do that exactly reason, but now have a shorter muzzle device that is cool and fits in a bag
@@generationofbmx only have used this out to 100 yards so hard to say … not noticeable if it did
is this the lefty version? i want to get the version where it folds to the opposite side. thanks!
Yup it’s the left side folder
Where’d u get that picatini attachment to add the brace too?
It came on my Ak.. if you go on the Zastava website they sell it for like $8 …
You still got the brace on?
Actually I lost my Ak on a camping trip in the mountains
@@Mr_P_Rockzz wtf??? How the he'll does that happen
@@justusbryant7366 it was just a joke with the pistol brace rule change. I do still have it though .
Did you choose the picitinny or the one for the m92?
It was for the zpap92 with picitinny rail attachment
Can you fold the brace both ways of the gun or you get to choose which way it will fold to?
When you order it you choose which way you want it to fold
Thanks for the quick response, can you provide me with the link you ordered it from? Also don’t i need a brace attachment plate as well?
@@ElPotrillo_1911 just depends on your model.. if you have a Zastava, centry arms , or arsenal Ak when you order your brace you will select the correct model… you go to CncWarrior. Com then select what side you want the brace to fold and then you also pick what type of attachment you need for your model.. you can attach it right to your Ak if you have a hole in the back.. or you can attach it to a 1913 rail like I did.
@@Mr_P_Rockzz thanks i have the same one as you, zastava arms m92 I believe
You should get it . Haven’t had any issues with it and I love it . I may be getting another one soon for another Ak
Where did you get the adapter
On their website cnc warrior
@@Mr_P_Rockzz how long did yours take to arrive I ordered mine a week ago and it’s still saying processing
@miguelgonzalez8972 mine was pretty fast.. I’m prettt sure I say how long it took in the video .. but if I can remember it was like two weeks .. total since they had it in stock ..
@@Mr_P_Rockzz awesome thank you man
Of which country it is made and about it price
And from where we can get it
Thanks
Serbia 🇷🇸 depends.. you can get it low as $850 online … I paid $988.00 for mine.. but my model was the A model with the 1913 rails on already. You can get on literally any website.. gunbroker, budsgunshop, grabagun, and many more if you just google the gun
i was looking at jmac customs braces but got confused by the adapters and mounts.. what mount/adapter did you select? the "ak pistol" option? i was iffy because the ak pistol option says "(fits most)" and was completely unsure which mount i would need for the zpap92
For this one you need a 1913 pic rail adapter since it already as the rail attachment… if yours doesn’t have a rail you would just pick the attachment that works for Draco or any other Ak with just a hole in the back … if you have no rail and no hole that’s gonna be suck because you would have to drill a hole in yours
@@Mr_P_Rockzz Does the 1913 pic rail adapter come with a screw because my zpap92 didn't come with a screw
@@BlackGoldSoul it’s been awhile but I don’t thinks so.. looks like I used the original one.. can order one for like less then a dollar off Zastava website or anywhere prob
@@Mr_P_Rockzzthanks I will do that
@@Mr_P_Rockzz ok so I just got mine but it came with the jam screws already in there. I can get it to turn like you did in this video so I can screw it on. It is very tight and I can figure out how to get the jam screws out in order to turn it. Did you go through this?
Mine already has a Picatinny rail in the back of it. Will it just bolt up to it without drilling it?
Yeah it will bolt right on it.. mine came with one also so it was super easy… I just didn’t have it on when I made the video
@@Mr_P_Rockzz can you send me the link to the one you bought? There like a lot of options on there I noticed
The one I got is called dog leg rail Gen 3 for the zpap92 … not able to share a link on here for some reason:/ should be easy to find just go on the website Texas Weapons systems click the rail and it will tell you the exact models it fits .. or it will have you select your model
Can you still shoot comfortably with this brace folded? 🤔
I went to the range yesterday and did not try it folded..with this right side fold I would not recommend… it is a really tight to get your finger into the trigger while folder.. it can be done if needed but wouldn’t be comfortable… if you order the left folder I would 100 percent recommend shooting folded… this right side can be done, but you prob wouldn’t be accurate or comfortable doing it
But once you add this brace you will prob never want to shoot folded because it is so fun and accurate with the brace..
@@Mr_P_Rockzz cool! Thanks guy 🙏🏾💪🏾
That is a good looking pistol
Thanks!!
I have a m92 and it came with a brace with this extra part and no hole in the back for installation. What do I do??
Hmm not sure what you are saying.. if there is a brace on it then there is prob a hole in the rear holding the brace? Remove the brace and should see the hole.??
@@Mr_P_Rockzz I apologize. The back of the ak pistol does not have a place for a hole to add the adapter. It came with a brace already with the extra extension piece by the pistol grip. Do I drill a hole in order to install??
@@cryptonomad.8656 oh I understand now.. it’s the kind that uses the grip to mount… yeah then you would need to have a hole in the rear to mount it straight on or to add a 1913 rail on.
@@Mr_P_Rockzz is that easy to do without a smith? Is there any videos on this process? Thank you for your help.
@@cryptonomad.8656 it’s just like drilling anything if you have a good drill..just take your time and make sure that the hole is center.. I’ve seen videos on it, but not sure how to tag you in one.. but taking it somewhere to get don’t shouldn’t cost too much.. just make sure you order the right brace website had lots of different mounting options to choose from.
What magazine is that?
@@rillwill6538 40 round Korean if I can remember right
@@Mr_P_Rockzz did the 40 round feed pretty good? Any wobble
@@rillwill6538 runs good .. no issues at all
What's the overall length of the brace and the length of pull? They don't have any of that info on their site
I’ll measure it for you as soon as I get home. When you say length of pull what do you mean so I can check it out also?
@@Mr_P_Rockzz per the overlords at the atf length of pull is measured from the trigger to the rearmost edge of the brace/stock
@@farewellvoyager5379 cool I’ll get those measurements when I get off work.. that length of pull it’s kinda strange not sure why that would even matter to them. I get the brace and stock barrel lengths and total length, but that trigger one is weird.
@@Mr_P_Rockzz apparently the max length of pull allowed on an SBR/pistol with brace (depending on the pending litigation) is 13.5 inches. Just another random number they pulled out of thin air. One last question for you about the brace: is there any qd sling mounts or anything like that?
@@farewellvoyager5379 so the brace is 9 1/4 inch .. the rear of the trigger is 12 1/2 inches … the front tip of the trigger is 13 1/4 inch
Anyone find a recoil pad for this brace? The one on their site has holes for screws
Idk if you should be adding a recoil pad onto a”brace” they might come after you saying it’s a stock now. Also if it is on an Ak there really isn’t much recoil anyways.. but to your question I don’t know never looked for one
Where is it made
Idk that’s an easy google question… think it says Serbia
Nice, will get one thank for video
Thanks for the comment
Can you give me the link to the brace ?
Can’t post links on here.. but it’s CNC Warrior Brace
Excellent video!👍 Where did you get the krinkov muzzle brake?
Thanks ! I purchased it online it's a JMAc LAF muzzle.. it's like $125.00
40 round mag? I dig it
Yup yup yup 40
@Mr_P_Rockzz Thank-you for the speedy reply sir!
@@Red_TEXAN thanks for the comment!
Does the brace come with the back rail?
The one I ordered did not..my Ak already had it.. when I ordered I selected the option that allows you to mount onto a rail.. if you don’t have a rail you can select a few options on how you wanna mount it.. hopefully you at least have a hole drilled into the back of yours or will be so much more work for you.
Looks great ❗️
Thanks!
Nice brace send link I think I will order same kind for mines . If it makes shoot better wit it
Not sure if I’m allowed to send links without getting banned. But you can google CNC Warrior brace..
What mag?
40 round mag.. can’t remember which one anymore sorry it’s been so ling
Nice video, Ordering mine now
Awesome!! I’ve got to shoot with it a bunch and it works really nice!
Mil sakti ha
I got a mini Draco I been thinking of selling it and getting this one so u think it’s worth it please anyone answer lol I been in a loop and when I ask my girl she says why sell my gun to buy the same one so she ain’t helping me lmfao
Zastava to me is the best in my opinion.. but I actually want to buy a mini draco myself .. either way you can’t go wrong.. the micro draco you can make super cool also.. you can change out that wooden hand guard for some nice tactical and also add this exact brace onto it . Depends what you want .. I hear the draco isn’t as reliable but idk to me if I had a draco idk just fix it up nicely..
Where’d you get your zpap from ?
I got it on gunbroker.com
My screw is stuck & will not screw out..
Hmmm not sure … should just screw out may just be kinda hard 🤔
@@Mr_P_Rockzz yeah, I ended up with a messed up screw. It’s like they used industrial glue on this screw. Gotta take it to a gunsmith to get it out😂
Where can I get that magazine?
Not to sure…you can just google 40 round mag.. i got this at a local spot.. think he said Korean mag, but I could be wrong ..
I just googled and it is a Korean mag.. will pop right up if you type Korean mag… was $24 online I overpaid for it at $30
Classic firearms.
If you haven't already make sure you use lock tite in it
Good to know .. I actually didn’t use any or even think about using it .
@@Mr_P_Rockzz it will loosen up on shooting it but i haven't had it loosen at all since I put mine on but I haven't tried to take it off for any reason either so that might be a pain
Looks sick!
Thanks!!
I just got my ZPAP92 and it has the hole in the backplate but no bolt. Do you know what size I need in order to install the brace? It’s just an empty hole in my ZPAP 😂
Weird you would get it with just an empty hole.. but you can go on Zastava website and get the Bolt and rail cheap.. I couldn’t find much info on the size though.. sure any good bolt that you can fit in it should work though..
Nice Tutorial , Does That Lil Tool Come With The Brace? Or You Have To Buy That Separate?
Yes the tool comes with the brace .
Should of got left hand fold so u can still operate it when folded
Exactly!.. I just ordered it wrong when I selected .. but I still love it..
With the folding stock, is it now considered an SBR?
That would be true if you added a stock, although it looks like a stock this is a brace so no need to SBR it.. although with the dumb ruling now I’m going to SBR it anyways
How do you remove the booster muzzle if you don’t mind me asking?
I think it just depends if n the model you get.. my was simple .. it was not welded on.. there is a little button on the tip of the barrel and you just push in then you are able to screw it off.. luckily this was a easy one to take off.. so that are welded have to break the welding off
Hope it doesn't get banned
I hear you there. atf is getting way out of reach. they need to get over it its just a brace he put on its not like its a full auto..
I don’t think they will. If anything it seems like the atf is losing lately. I live in Texas though idk about your states.
@@Mr_P_Rockzz Live In Pennsylvania. So far they havent but they have brought up a few bans. Glad they never passed. It looks like we are winning and maybe if atf continues to do its silly little grabs that dont make any sense they allow it and later on take it away. they will loose the battle in hassling people in the end. They dont seem to understand do not infringe. I know you seem to have alot more freedom in Texas as I know a friend from there to. Wish all states had it that good.
@@Mr_P_Rockzz if Beto gets in they will be lol
@@JayTX. idk these other states aren’t like Cali.. most people have like two weapons with braces.. don’t think they would put up with that. Weapons are made so we can fight the gov if needed .
Love it
Thanks!!
That's the dyslexic brace!
تم
Dam change the battery in your smoke detector. Had me continually pausing believing one of mine had a low battery.
@@toddparsons2980 hahah. This is old tho 💀 changed that thing out and moved to a different state 💀
Martinez Sandra Anderson Richard Harris Frank
@@ClaraIda-x1e :)
Wilson Paul Martinez Helen Martin Larry
@@EugenMurray :p
Si compro está arma con todo lo legal , la podrán mandar a México.
No creo que puedas tener armas en México?
la mayoria de los vendedores de armas no envian a Mexico
Gonzalez Deborah Young Betty Thompson Thomas
@@davisereynolds9243 :)
Wouldn't it be better folding to the left, your trigger is blocked for a right hand shooter?
Looks Awesome.
Thanks for sharing your installation video.
Masonry Plus
Florida DeSantis Strong
Trump Trump Trump
Yeah when I ordered it and it said “right hand” I assumed that it would fold to the left so you would be able to use your right hand.. woulda been cooler if I got the other, but I’m happy with.
I got mine in left hand. Works like a charm.
@@mikeanderson4555 haha sure rub it in 😆😆😆
Haha ! Nice man! Would be cool to be able to uses while closed ! It is what it is.. man idk about you, but to close the brace is extremely hard sometimes have to push it agains my leg it a table just to get it closed
@@Mr_P_Rockzz give it a smack down at the folding point and it will close. And put a bit of lube on the pivot pin.
Miller Shirley Hernandez Amy Jackson Robert
@@AudreyMalia :p
😻
Thanks!!
YOU NEED A BENCH MATT
@@tedr.richardson4655 would be cool to have but not a big deal to me
Clark Michael Davis Melissa Johnson Michelle
@@AudreyMalia :p
Harris George Davis Robert Miller John
:)
Hall James Moore Dorothy Anderson Christopher
@@AudreyMalia :)
MY TOP 4 ARMS ARE 1`911 SIDE ARMS THE HCAR 30..06 SOCOM AND M14
V nice
Thanks!!
😮😅
Thanks!!
Keep all your Magazines Loaded, Empty Mags are like Dead Power Tool Batteries, Useless when you need them.
@@tedr.richardson4655 yeah they are loaded mostly, but if I have loaded mags in the video or say I have loaded mags In the videos RUclips doesn’t like that and people like to complain
What a hack 😂
How tf anyone live with the fire alarm beeping like that like literally every 2 min😒 I made it 3 min in and I can’t take it.. naa man I can’t watch this shit another min.
@@robrusso3062 I’m kinda deaf 🥴
What mag is that?