I once had a situation where the game disc wouldn’t open up, so I had to find a tutorial, and it was easy, you just grab a paper clip, you’ll see a very small hole between the power button & controller 2 to plug in.
omg wow thank you. just saved my xbox. in 20 years of owning it, never had i seen that button. watched so many repair videos and no one person talked about this. brb gonna play halo 2
literally every video game console has thermal paste to prevent board overheating. its common knowledge. on a console that old, it would be ineffective, leading to board overheating and damage.
@MrMohammedalkhater As the friend said, all video game consoles have either thermal paste or thermal pads, and more on those classic Xbox consoles that are more than 20 years old from the factory, the thermal paste has to be changed, yes or yes.
With the revision 1.6 boards, i would recommend replacing the capacitors near the power supply, as those often fail/leak. And, as others have said, new thermal paste after thoroughly cleaning off the old crap.
Good job with the sanding of the top cover. Also, grease would've been better instead of oil inside the ODD, for the tray mechanism. And also, not replacing the thermal paste for the CPU? 😒 I give it a 7/10...
I love the original Xbox I recently purchased one and funny enough the case is actually dark green colour just get an led torch and shine it at your Xbox and you can see for yourself
i had an xbox close to this condition my brother got it for me on ebay for christmas of 2020 and when i went to look around it i can see tons of huge dust bunnies so when i opened it holy crap was it bad luckily the caps were fine everything looked good it was 1 1.3 revision so i had to remove the clock cap i was lucky though it was just starting to leak so i cleaned it up and the console looked good as new one tiny minor thing is the tray open and closes on its own once or so but its not an annoyance since it doesnt happen when i have a game in it
Can spot a sham from a mile away. Always the usual excessively dirty consoles. You already pre opened the console and filled it with crap. not the first time, your Snes videos were easy to spot the fact the consoles were different.
Im really enjoying the video however... correct me if I am wrong. For some reason I am getting the feeling that this is one of those videos where a person makes something look extra dirty just so their video looks more interesting..
You have to be careful when taking these apart. The plastic in these is the same junk that was used in those second and early third generation Dodge ram pick up dashes.
hola algún latino que me pueda ayudar con mi xbox que se daño al parecer intente ver que codigo de error lanzaba pero no tira nada no se si se daño el disco o la lectora o algun componente me pueden ayudar
@@resEG ¡hola! fíjate que tengo una Xbox clásica que enciende, pero al iniciar le muestra en la pantalla unas letras verdes, ya investigue y resulta que es un error y dice que debe dar un código en la parte de arriba a la izquierda para identificar el error, pero mi Xbox solo muestra las letras verdes en pantalla y no el dicho código me puedes ayudar ya que aqui en Guatemala es muy caro pagar el diagnostico para mi consola gracias por ayudarme.
I have a question, did you clean the old thermal paste off of the GPU and CPU? maybe you did but the clip was not included in the final edit of your video, if you didn't I'm wondering why you went all the way opening and disassembling the console and didn't take that very important step, this console is 20+ years old so the thermal paste on these components NEEDS to be replaced! I would recommend you go back in the console and put some new thermal paste on the GPU and CPU. great video otherwise
Didnt replace the thermal paste. Didn’t even change out the clock capacitor. Didn’t lubricate the rails didn’t realign any of the plastic. Just go away.
I have a o g microsoft xbox console i cleaned the top and bottom of the system shell the front faceplate where the controllers plug in also clean the controller ports the cooling fans the heat sinks the motherboard the dvd drive tray gears and belt remove old thermal paste and reapply new fresh thermal paste on the central processing unit and graphics processing unit most importantly if its a 1.0 through 1.5 remove the clock capacitor its how i cleaned fixed inspected refurbished repaired restored reapplied new thermal paste on the central processing unit and graphics processing unit and my o g microsoft xbox o g microsoft xbox 360 and o g nintendo game cube o g sega genesis and o g game gear works excellent there was 4 brands of dvd drive the o g microsoft xbox used the worst is those Thomson drives they always give the dirty or damaged disc error the best reliable drives is the philips samsung and hitachi three brands of power supply unit fox link delta electronics and mineba and 2 brands of ide 40 hard disc drives 8 gigabyte western digital seagate and 10 gigabyte western digital and sea gate in addition if the og microsoft xbox is modded with a mod chip its random access memory upgraded to 128 gigabytes it can play those arcade games most importantly for best results use a 2 terabyte sata hard disc drive and 80 wire ide cable
I'm glad to see this console back again, great work
I'm glad we came a long way with the graphics and still evolving. 2000s was an era
Yes, exactly
Back then graphics differences were very noticeable from today but between xbox one/ps4 & xbox series x/ps5 the graphics are the same,these are facts.
in my opinion retro video games were way better than the newer stuff that we have
I love the dry dirt smeared on the top of the console just before they start recording.
My favorite console ever ❤
Awesome! Thanks so much!!
My God...You needed to re-paste. It will be like rock! And a re-cap would prob be advisable.
didnt even replace the thermal paste
Yo pensé igual
He wouldn’t know how. All his videos are fake
@@sbd9907 how did you know?
@@sbd9907 But he is really a professional, and in many videos he replaced the thermal paste. I learned a lot from him. Why are you accused of that?
esto no vale si no cambia la pasta térmica y los capacitores de 3300... trabajo a medias😂
It looks great on you as always partner thanks for another video of repairs and you see asmr :3
I once had a situation where the game disc wouldn’t open up, so I had to find a tutorial, and it was easy, you just grab a paper clip, you’ll see a very small hole between the power button & controller 2 to plug in.
omg wow thank you. just saved my xbox. in 20 years of owning it, never had i seen that button. watched so many repair videos and no one person talked about this. brb gonna play halo 2
Nice job saving that original microsoft xbox
Nice one like the end result you got keep up the great work
You missed the change of thermal paste, but as always an excellent repair: 3
I agree with you
literally every video game console has thermal paste to prevent board overheating. its common knowledge. on a console that old, it would be ineffective, leading to board overheating and damage.
@MrMohammedalkhater As the friend said, all video game consoles have either thermal paste or thermal pads, and more on those classic Xbox consoles that are more than 20 years old from the factory, the thermal paste has to be changed, yes or yes.
@@PabloRazzall24yet 100s of thousands of them are working just fine with original thermal paste.
Thank you for your work. You, like a magician in a fairy tale, saturate old forgotten music boxes with life. Thank you!
Thanks for the visit, Have a great day
crazy how much detail you put into all this, but im surprised you didn't pull off the heat sinks and replace the thermal paste
You can insert a paperclip in the front to manually open disc tray
Kinda looks like a mint condition xbox made dirty if that makes sense.
*Nice Job Dear Brother Restoration EG... XBox Classic is an Amazing Console... Thanks for Sharing this Great Content...* 😁👍
Always great❤ videos
Surprisingly the fan was really clean 🤔🤣
А чего он должен быть грязным?
Haters are going to hate, this is his way of restoring the xbox. If you dont like it then go find another channel to watch.
Great restoration and maintenance
Best console for me
My favorite console 🎉❤
With the revision 1.6 boards, i would recommend replacing the capacitors near the power supply, as those often fail/leak. And, as others have said, new thermal paste after thoroughly cleaning off the old crap.
yes I commented the same!
Was it the 1.6 they were bad on , or was it other versions as well?
No the 1.0-1.1 was the worst ones because the clock cap and other capacitors always leaked
j'aime bien tes vidéos rénovation
no quiero saber donde estaba esa belleza de XBOX PERO QUE SUCIA estaba pero ya la dejaste como nueva que bien
Доктор ) !Удачи тебе и спасибо что дал и даешь новую жизнь приставкам 🤘👍!
Somebody had that Xbox in an attic for 20 years with the way it was covered in insulation.
before sleep, i love asmr new contets, thanks, like !! *i'm Huntress anime*
Xbox Monster Brother 🖖👹
Thank you, I really appreciate it.
@@resEG 🤑🤙
another great ASMR video
I'm glad you like it
Nice handmade
Congratulations you the best
I’m thinking about getting the original Xbox.
Amazing 😍
Good as New for gaming
Good job with the sanding of the top cover. Also, grease would've been better instead of oil inside the ODD, for the tray mechanism. And also, not replacing the thermal paste for the CPU? 😒 I give it a 7/10...
I love the original Xbox I recently purchased one and funny enough the case is actually dark green colour just get an led torch and shine it at your Xbox and you can see for yourself
I think you are supposed to clean the belt on the disk drive with isopropyl alcohol.
A DK Oldies fully refurbished console i see
Where in the hell did that Xbox come from?😮😮 The depths of hell ?😮😮
From Egypt, Thanks for the visit
Shit came from Ancient Greece
Wonderful work! I advise everyone to watch the work of the master! Interesting and fascinating! 👍🏻👍🏻👍🏻
Good❤
Ты самый лучший блогер на Ютубе 😂здоровья счастья успехов ❤❤❤❤😂😂🎉
Odd Tinkering feel Proud When He He Watching this
i had an xbox close to this condition my brother got it for me on ebay for christmas of 2020 and when i went to look around it i can see tons of huge dust bunnies so when i opened it holy crap was it bad luckily the caps were fine everything looked good it was 1 1.3 revision so i had to remove the clock cap i was lucky though it was just starting to leak so i cleaned it up and the console looked good as new one tiny minor thing is the tray open and closes on its own once or so but its not an annoyance since it doesnt happen when i have a game in it
can you add a hard disk containing games instead of still using ad dvd to play games?
Best troll of youtube 😅
What sandpaper number do you use to remove the scratches?
How do you do this stuff do you go to school for this stuff?
Training and tutorials
@@EIizabethAfton391 That makes sense
What’s that white thing for using the brush 9:22
Did you use 1200 sand paper ??
Ты самый лучший блогер на Ютубе здоровья счастья любви и близким 👍 здравствуй 😂😂😂😂
Спасибо за добрые слова! Спасибо дружище! Хорошего дня.
Muito bom cara 👏👏
verdade
Is Amazing ⚙️⚙️⚙️⚙️😁😁😁👍👍
I'm glad you like it
Where was it found?
whats liquid in tub??
Just a pc in a box
Did you buy this from DKoldies? 😅
What thing is that you clean at 8:56 ?
And at 9:22 ?
And the at 9:37 ?
And at 11:50 ?
Please do the Nintendo Wii U restoration video for me? 🥺
Dkoldies should learn from you
Can spot a sham from a mile away. Always the usual excessively dirty consoles. You already pre opened the console and filled it with crap. not the first time, your Snes videos were easy to spot the fact the consoles were different.
Im really enjoying the video
however... correct me if I am wrong.
For some reason I am getting the feeling that this is one of those videos where a person makes something look extra dirty just so their video looks more interesting..
Nombre del kit ???
...and the duck on water...?
Just a quastion, are you from Egypt ?
What’s that called 10:23 ?
Is it for sale
❤❤❤❤❤
All that work and you didn’t replace the thermal paste
You have to be careful when taking these apart. The plastic in these is the same junk that was used in those second and early third generation Dodge ram pick up dashes.
😊que es lo blanco que le pones
Puso cera para pulir
Shouldn't make fun of me guy
Sir, u forgot the thermal paste
hola algún latino que me pueda ayudar con mi xbox que se daño al parecer intente ver que codigo de error lanzaba pero no tira nada no se si se daño el disco o la lectora o algun componente me pueden ayudar
Por favor más claro para poder ayudarte
@@resEG ¡hola! fíjate que tengo una Xbox clásica que enciende, pero al iniciar le muestra en la pantalla unas letras verdes, ya investigue y resulta que es un error y dice que debe dar un código en la parte de arriba a la izquierda para identificar el error, pero mi Xbox solo muestra las letras verdes en pantalla y no el dicho código me puedes ayudar ya que aqui en Guatemala es muy caro pagar el diagnostico para mi consola gracias por ayudarme.
That thing is begging for a recap.
I have a question, did you clean the old thermal paste off of the GPU and CPU? maybe you did but the clip was not included in the final edit of your video, if you didn't I'm wondering why you went all the way opening and disassembling the console and didn't take that very important step, this console is 20+ years old so the thermal paste on these components NEEDS to be replaced! I would recommend you go back in the console and put some new thermal paste on the GPU and CPU. great video otherwise
In the next video do arcade game
Cool idea, thanks for suggesting
👍👍👍👍👍👍
the Xbox looks dust 😂 SIKE!
What thing is this 9:39
😊
🎉
This XBOX worked in the land of Pink Pony?
No sé si hablas español pero porque no reparas el mando de la Xbox
fake. nada de restauración, sucia apropósito :/
🔥 🔥 🔥 👍👍👍👍👍👍🔥🔥🔥🔥🔥
Glad you like them!
❤😮
Glad you like them!
Faked with crud on top.
So you caked it in mud then cleaned it and put it back together ! That is not a restoration, that is a scam and click bait like all of your videos.
❤❤❤❤🎉🎉🎉🎉🎉
Ну помыл приставку, что такого?
Didnt replace the thermal paste. Didn’t even change out the clock capacitor. Didn’t lubricate the rails didn’t realign any of the plastic. Just go away.
am i trippin or does that say “xobx”
Just you
Ànd I still like ya
I have a o g microsoft xbox console i cleaned the top and bottom of the system shell the front faceplate where the controllers plug in also clean the controller ports the cooling fans the heat sinks the motherboard the dvd drive tray gears and belt remove old thermal paste and reapply new fresh thermal paste on the central processing unit and graphics processing unit most importantly if its a 1.0 through 1.5 remove the clock capacitor its how i cleaned fixed inspected refurbished repaired restored reapplied new thermal paste on the central processing unit and graphics processing unit and my o g microsoft xbox o g microsoft xbox 360 and o g nintendo game cube o g sega genesis and o g game gear works excellent there was 4 brands of dvd drive the o g microsoft xbox used the worst is those Thomson drives they always give the dirty or damaged disc error the best reliable drives is the philips samsung and hitachi three brands of power supply unit fox link delta electronics and mineba and 2 brands of ide 40 hard disc drives 8 gigabyte western digital seagate and 10 gigabyte western digital and sea gate in addition if the og microsoft xbox is modded with a mod chip its random access memory upgraded to 128 gigabytes it can play those arcade games most importantly for best results use a 2 terabyte sata hard disc drive and 80 wire ide cable
Why was this covered in makeup foundation?
First
Thank you, I really appreciate it.
Asuu parece que esa pobre xbox estuvo trabajando de albañil 😢
Çause I've done nothing to you