I had to make some changes to the original video and re-upload. Sponsor stuff... Sorry about that :/ I learned from previous comments that the foam I used MAY interact badly with nitro finishes on nicer guitars. Leather would be a safer option for padding. Also, extending the "feet" back behind the guitar will make it more stable , although mine is fine for me personal use.
*Bob* starts off video explaining everything he did wrong and just makes a new one *Me* cuts wood wrong and ends up with my table saw catching on fire Lol
Joel da Silva Vicente Filho I don't understand why people say that. Like I've never complained that I don't have a tool. There's always someone who has that tool that you can become friends with and learn how to use. Or you could just save up enough money to but that tool. I started off with nothing. Got a job at a lumber yard. Spent everything I made there on tools. Ended up with a cast iron table saw, a lathe, bandsaw and huge sander. So maybe people have actually put in the time and the effort to get to where they are. Just a thought
I really like the look of this Bob, I'm really surprised with the fact the guitar didn't tip over. just because It looks so short. You've inspired me to stop surfing youtube and to get back to making something!
I don't have a guitar, but I do love stuff that folds up! I like the design, simple and classic. If you plan to make more, I have a suggestion on the back lock: You can cut a strip down the middle as a channel for the screw, then offset it lower on one side so it will slide into place and also slide closed. This makes it automatic and a little more stylish, don't you think?
A great trick (from sdgood's scrollsaw channel) when using templates is to cover the board with blue masking tape, then spray the tape with adhesive and stick your template to the blue tape. Easy to remove the template after cutting, every time.
I think it's very helpful for the people who have the necessary instruments like the machines u have but try to upload some craft work without using ur machines so that those who don't have the machines can also craft out something good.
I think this is a really nice build but also it's one where looks comes before practicality. Usually in your videos it's the other way around. As you said, the brass hinge is something that could be improved as it's the crucial piece keeping it all together. The stand looks awesome but also like it's about to collapse under the weight of a guitar so it leaves a feeling of disappointment because a lot of effort went into it.
I Love this channel. such energy! I have Been a subscriber for a while now, I've watched almost every video. Yesterday i even watched some of them from your website
Very nice. Mine's welded steel. Yours looks a lot nicer, but I play live a lot and I don't think it would hold up to the amount of punishment I'd give it. Still, I might make one for home.
Nice design. I think it could be improved upon aesthetically though (better contours and tighter fitting connections where the stand folds); though taste is subjective. Thanks for sharing.
Brilliant! I love the portability of your design. I think I will have a go at making some. I haven't been a subscriber for very long, so apologies if you already built one, but how about a collapsible music stand? Thanks 🙂
UrbanDanger ! Look up the "Making It" Podcast, it's on iTunes and Google play I believe. It's him, Dave from Make Something and Jimmy DiResta. I thought this was common knowledge by know, so I'm glad to introduce someone new to it!
I had to make some changes to the original video and re-upload. Sponsor stuff... Sorry about that :/
I learned from previous comments that the foam I used MAY interact badly with nitro finishes on nicer guitars. Leather would be a safer option for padding.
Also, extending the "feet" back behind the guitar will make it more stable , although mine is fine for me personal use.
I Like To Make Stuff 4th like first comment
hi bob
Love it
I Like To Make Stuff why does it say 2 days ago on your comment
I Like To Make Stuff no prob Bob 😊 I'd probably rewatch this 4 times anyways
More guitar stuff please
I watched this again because you know... support and all that... You're almost to 1.5 mil subs!
I really appreciate that man!
*Bob* starts off video explaining everything he did wrong and just makes a new one
*Me* cuts wood wrong and ends up with my table saw catching on fire
Lol
Ryan Downie My life in a nutshell
Sounds like an awesome video. Got a link?
our work table saw actually caught fire once.
hey, at least you have a table saw :V
Joel da Silva Vicente Filho I don't understand why people say that. Like I've never complained that I don't have a tool. There's always someone who has that tool that you can become friends with and learn how to use. Or you could just save up enough money to but that tool. I started off with nothing. Got a job at a lumber yard. Spent everything I made there on tools. Ended up with a cast iron table saw, a lathe, bandsaw and huge sander. So maybe people have actually put in the time and the effort to get to where they are. Just a thought
Rewatched. No idea what you changed. :)
Try putting blue tape on the wood and gluing the templates to the tape. It would make taking the templates off a bit easier.
"Im not worried about it falling at all"
Puts his hand behind out of fear of it falling, but really nice build i might try it
"I am not worried about this thing falling backward"
*Puts hand behind guitar*
almost falls backwards.
Seriously though, love your work Bob
Bobification bell 🔥🔥
Ha! :) Love it
A bell that bobs, not rings.
Very nice.
I love watching everything you produce and I don't even make any of them. Your passion and perseverance is outstanding! Your family must be so lucky
don't know if are aware of this but CA glue can have a thermal reaction with some foam rubber material . Friendly FYI.
You should make a headphone stand.
Toshi Harris definitely
I really like the look of this Bob, I'm really surprised with the fact the guitar didn't tip over. just because It looks so short. You've inspired me to stop surfing youtube and to get back to making something!
What do you mean “the stand is not perfect?” It’s perfect!
COOL! I wanted to make one as Christmas gift this year. Perfect!
How did I miss this Gem! I have been following for at least a year!
Nice Mustang.
What a great project!!! Thanks! I LOVE Walnut.
Wow, that new shop is huge
Watched again..... YOUR VIDS ARE THAT GOOD i can watch em multiple times NP
I missed the entire project cause I was laughing hysterically at RGLRPRPR tm hahahaha that is gold
:)
I don't have a guitar, but I do love stuff that folds up! I like the design, simple and classic. If you plan to make more, I have a suggestion on the back lock: You can cut a strip down the middle as a channel for the screw, then offset it lower on one side so it will slide into place and also slide closed. This makes it automatic and a little more stylish, don't you think?
I like this a lot
A great trick (from sdgood's scrollsaw channel) when using templates is to cover the board with blue masking tape, then spray the tape with adhesive and stick your template to the blue tape. Easy to remove the template after cutting, every time.
Great idea!
Just watched this, even though I don't entirely know what changed.
But- it was just as cool as before, and my little view helps build support.
Wait, your sponsor is gone!
The scooter was pretty cool, but not if they were upset enough to make you reupload and drop their video!
It will be added to a future video with some new footage. We had a miscommunication but it's all good.
Rewatching cause Bob deserves it! Also, where can I get some of that rglrprntrppr? XD
It looks classy! Nice build and prototyping.
Thanks Dan!
Still a great video, could rewatch all your videos all day
Thanks so much!
I think it's very helpful for the people who have the necessary instruments like the machines u have but try to upload some craft work without using ur machines so that those who don't have the machines can also craft out something good.
Even though I watched this before, I still watched it again. Love your videos man, keep up the amazing work
Thanks Adam! I really appreciate that!
I like it. I might try making that myself.
I thought it was a new video I was so excited
Nice one. Really very simple and easy to make. It's really given me a good idea to make it myself. Tnx
Perfect for handpan
nice I will do it for my woodworking class.
Nice
I think it is perfect!
I like this idea. I may use it, but I would like to make it a double stand for two guitars that could be separated.
more guitar stuff
Could also make for an iPad stand, or cookbook stand... I like it!
Is the template available for public use? I would like to make this for someone and would love to use the template you made.
Great job Bob!
Thanks Tim!
Still watched anyways because I like to watch stuff
I think this is a really nice build but also it's one where looks comes before practicality. Usually in your videos it's the other way around. As you said, the brass hinge is something that could be improved as it's the crucial piece keeping it all together. The stand looks awesome but also like it's about to collapse under the weight of a guitar so it leaves a feeling of disappointment because a lot of effort went into it.
Cool
Beautiful mustang at the beginning lol
Cooooool! More music-oid projects, please! :D
Great job Bob. Keep up the great work.
Thanks Cameron!
Bob starts off video explaining everything he did wrong and just makes a new one
I Love this channel. such energy! I have Been a subscriber for a while now, I've watched almost every video. Yesterday i even watched some of them from your website
Great build, but it looks like it will topple easily once the guitar is in place.
I love your videos, keep up the great work Bob!
Thanks Nic!
I would love to see you build a guitar, maybe one from a kit and one from scratch.
NICE!
That looks awesome! I'm gonna try this!
It's awesome
That was a cool project video! : )
I’m glad I watched this for the second time. The reveal when you put the guitar on the stand was awesome. The music was perfect. Great job.
Thanks so much and thanks for watching twice :)
hey i like all of your videos. please make a acoustic guitar too. you already make a guitar case and stand. now time for the guitar.
Habia mirado a huevo el proyecto, pero quedo bastante bueno...🖖😎👍
Re-upload or not, your content is still new and refreshing!
:) Thanks! I appreciate that !
I love it, you should sell them on your page I'd love to get my hands on one
If you were to add a u Shape it would enshore the guitar would stay weren’t supposed to and not fall over .
Nice one !
Love this project! Are the plans available anywhere?
Very nice. Mine's welded steel. Yours looks a lot nicer, but I play live a lot and I don't think it would hold up to the amount of punishment I'd give it. Still, I might make one for home.
Nice design. I think it could be improved upon aesthetically though (better contours and tighter fitting connections where the stand folds); though taste is subjective. Thanks for sharing.
How do you know what finish to use for different types of wood or different projects?
Make an infinity mirror table
You should make a hanging guitar hook...
Deja vu
What are your favourite bar clamps
Brilliant! I love the portability of your design. I think I will have a go at making some.
I haven't been a subscriber for very long, so apologies if you already built one, but how about a collapsible music stand? Thanks 🙂
Can you do a build where you don't use any power tools
I have two Guitars but never learned to play however i would like to make a stand like this or maybe a wall mount for the Guitar.
How about making contrasting wooden bolts?
Will a dreadnought acoustic fit on that stand? Love the walnut and brass.
Bob, I want to make a Mancala set but I don't know how. Can you make a video on making a Mancala set for me?
I wana see your guitar collection
What's the background music? It's super sick.
still watched it again...just realized it can also hold a large plate too 😄
Thanks for rewatching!
“Im not worried aboit tjus thing falling over “ puts hand behind it to catch is to it doesnt fall
Can you make a guitar Wall hanger ,too?
Ahh!! i was gonna say!!.youtube's got some serious bugs..lol
"Take it easy bob!"🍻🥞
Okay so while watching your build It came to me how about using leather for the hing? it is cheap and can be replaced the same.
👍👊
RGLRPRNTRPPR, now in the ILTMS shop!
Whats the difference?
Can you share your template for use to print and use too ? I really like it and I would appreciate it a lot
Great vid but why was it re uploaded?
Like
I'm sure we'll hear about why he reuploaded it on the podcast. I can't handle not knowing!!!
Marco B
What podcast?
UrbanDanger ! Look up the "Making It" Podcast, it's on iTunes and Google play I believe. It's him, Dave from Make Something and Jimmy DiResta. I thought this was common knowledge by know, so I'm glad to introduce someone new to it!
me puedes facilitar plantillas para hacerla
Oh lord, blue tape? Just wait 'til you try and finish it. They make double-sided woodworking tape just for situations like yours, use that!-)
any ideas how to make one for v shaped guitar ?
Can you tell me the size so I can do it please
Can you plz make plans?
Why another upload???
Can you make one for a keyboard?