Thanks man. Im an owner op. Mine has been blinking on and off during turns. I think this will fix it. Im about to step out and do this repair. Good video.
Thanks for the video. Used the pin out explanation to back lead test the loss of power to on trailer abs light back up to the plug in on the face of the trailer.. I did the same thing 4 years ago but forgot. Very helpful
Some other you tubers recommended using a jumper from one hole to another to fix a light that was off, I did it and it worked, but would have to be fixed to avoid using the jumper all the time? I cleaned out the contact ports and opened up the prongs up a little bit more using a flat head screwdriver, but still need the jumper, I bought a new pigtail but it still need it, what would you suggest or recommend? Thanks in advance.
Thanks man! I need to learn how to do more of this stuff on my company truck so I don't have to wait for management to get around to it.
Thanks man. Im an owner op. Mine has been blinking on and off during turns. I think this will fix it. Im about to step out and do this repair. Good video.
Thanks for the video. Used the pin out explanation to back lead test the loss of power to on trailer abs light back up to the plug in on the face of the trailer.. I did the same thing 4 years ago but forgot. Very helpful
Solder light cord wire strands together , the screw will tightly bind into the solder . Place a drop of Loctite on screw heads .
Very helpful!
Thanks again
This is NASCAR of electrical plug replacements or watt
Some other you tubers recommended using a jumper from one hole to another to fix a light that was off, I did it and it worked, but would have to be fixed to avoid using the jumper all the time? I cleaned out the contact ports and opened up the prongs up a little bit more using a flat head screwdriver, but still need the jumper, I bought a new pigtail but it still need it, what would you suggest or recommend? Thanks in advance.
Is there a problem if you jump the black and the brown?
Try it and You let us know 😂
Thank you brother good video.
Thank you O Aguilar.
I think I'm just going to sliiiiiiide to Loves❤️ 😭😭😢😢😢😭😭😳
Screwing the wire down with the new one sucks. It can spin if the screw comes out. Poor design by Phillips but good video
His video was trash, bc for someone who's trying to do it themselves he should've went step by step 👎👎👎