The work that Kevin does is not for amateurs and is very strenuous, but at least he is free from paying rent, energy, water and other taxes. which can't be cheap at all in England. He is free and knows at the same time. other places. very good 👍
Im watching the driving on the left. Some memories for me.....driving around countryside in sussex to do L200 clutch in a horse stable....and a 12volt 3/8 snap on impact gun....😊
Mr. Williams the clutch ninja never sleeps! 🥷That Pug tranny gave you a nasty thumb pinch after you fought the awkward suspension setup and all those stud bolts. Thanks again for all your efforts: Your Volvo V50 2.0d video was of great help when I did the clutch on mine. I wish you good health and good weather going forward! 👏
Interesting way of talking down and putting up a Transmission. My question is you'll travel about 100 miles to do a job, about how many can you do a day to make a decent profit after expenses? Thanks.
That Peugeot 407 designer really gave suspension a thought on how to make it as difficult as possible to change or remove a driveshaft. In heavy machinery I had JCB frontloaders I really didnt want to even think of working with just bc of the design desissions made for not being able to maintain things that broke often. Like hydraulics hoses etc. Just why make a suspension like that on a peugeot Enough to hold up an army truck :O
I can guess why such the suspension was designed for this car. The car weighs 2 tons 40 kg for 2.2 liter engines. There's a lot of cast iron and metal under the hood. Also, this suspension gives a very smooth ride on bump surfaces, the car literally floats along the road considering that it is heavy. Visually, the suspension seems like a heavy thing, but in general, disassembling and reassembling it is not difficult.
What would you have done if the subframe bolt on the Mondeo had just spun because the captive nut had sheared off ? I’ve got a 2001 Mondeo that has never had a clutch change.
My semi auto 3008 Peugeot 2013 rocks forward and back when changing gear and shudders on pull off is this gear box or clutch as had clutch and flywheel done drives really bad lol like no joke drove like it for years Peugeot main dealer every garage in my areas dnt now u could make a whole video on my car its like riding a horse its rocks forward and back so bad you need a neck brace loool when in low gears if u ever in birmingham way i beg u drive my car see wot u think cars gave me anxiety looooool
@@WMCS iv had that done at main dealer in lower gears its rocks forward and back so bad u need a neck brace i think its clutch even tho i had done and even worse
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
www.williamsmobileclutch.co.uk 🇬🇧
Contact Us For Your Clutch Replacements.
0:09 2009 Peugeot 107 Urban 1.0L Petrol.
26:38 2014 Ford Mondeo Titanium X TDCI 2.0L Diesel.
1:01:19 2006 Peugeot 407 HDI 1.6L Diesel.
1:40:08 2016 Citroen C4 Picasso VTR+ Blue HDI 1.6L Diesel.
2:10:52 2013 KIA Sportage 3 CRDI 1.7L Diesel.
Excellent points about the the Organisation that can not even be mentioned in places like this via the typed word. Everything else is secondary.
Respect, ive done a couple of clutches off the floor over the years and it's hard graft. Definitely a young man's work. Well Done.
True words 🔧👏 never again would I do clutch repairs on the ground I’m to old now buddy
@@castrolgtx5064 yea i have to do mine tomorrow and i am in my mid sixtys, I will probably look like the hunchback of notradam tomorrow. 😀
Great video very helpful info. But that's amazing hard graft and I love your setup with the mat's.
Wow!!,kev,total respect,bud,that mondeo took some stipping down,,as allways top job sir😊
The work that Kevin does is not for amateurs and is very strenuous, but at least he is free from paying rent, energy, water and other taxes. which can't be cheap at all in England. He is free and knows at the same time. other places. very good 👍
Im watching the driving on the left. Some memories for me.....driving around countryside in sussex to do L200 clutch in a horse stable....and a 12volt 3/8 snap on impact gun....😊
well I bet you are glad you are not in Ireland nothing but rain rain and more rain thanks for the video it is passing time away nicely
Mate you a beast.. im a mechanic never could do this
Thank you Kevin
Regards from Sweden.
Mr. Williams the clutch ninja never sleeps! 🥷That Pug tranny gave you a nasty thumb pinch after you fought the awkward suspension setup and all those stud bolts.
Thanks again for all your efforts: Your Volvo V50 2.0d video was of great help when I did the clutch on mine. I wish you good health and good weather going forward! 👏
Thanks for taking time to leave a review. Vey much appreciated
Typical of the rain to stop when you had the clutch repair finished on the Mondeo Kevin 💥🌧
Beaux travail Kévin tu et un pro
Go go go very best Kevin-Albert 👑🌊🏖😊
and thats a thumbs up from me kevin 👍
very good work👏👏
Nice work as always Kevin from this week which gearbox was the heaviest.
Top work as always
Is it not worth you getting a small pop up gazebo, keep the rain of you.
NICE WORK KEV AS always 👍👍👍👍
Thankyou Cliff 🍻🍻
As always awesome mechanical videos!
But terrible videos for tourism! 😂
Blighty living up to its reputation! Always raining!
I honestly think there should be rain drops on the country’s flag and insignia 😁🍻
Concidering emigrating to England only so I can make use of your services. 🤗
Good work 👍
And on the kia too bud,😊😊
Hi, how do you put the transmission oil back in that you drained out at the start or did I miss that? Thanks
Interesting way of talking down and putting up a Transmission. My question is you'll travel about 100 miles to do a job, about how many can you do a day to make a decent profit after expenses? Thanks.
That Peugeot 407 designer really gave suspension a thought on how to make it as difficult as possible to change or remove a driveshaft. In heavy machinery I had JCB frontloaders I really didnt want to even think of working with just bc of the design desissions made for not being able to maintain things that broke often. Like hydraulics hoses etc.
Just why make a suspension like that on a peugeot Enough to hold up an army truck :O
I can guess why such the suspension was designed for this car. The car weighs 2 tons 40 kg for 2.2 liter engines. There's a lot of cast iron and metal under the hood. Also, this suspension gives a very smooth ride on bump surfaces, the car literally floats along the road considering that it is heavy. Visually, the suspension seems like a heavy thing, but in general, disassembling and reassembling it is not difficult.
It is quite a bit of overkill if you asked me. It wasn’t the easiest to be fair. Video makes it look so. But reality a bit different
What would you have done if the subframe bolt on the Mondeo had just spun because the captive nut had sheared off ? I’ve got a 2001 Mondeo that has never had a clutch change.
There’s a hole just enough to fit a ring spanner on that nut.
Sometimes it may require a slight incision. Nothing a few sutures can’t put right after.
Uk clutch ninja❤
최고입니다
How yoo dooin, alright !
You do not show how to drain the transmission oil. I think it is better to show.
Try subscribing to the channel.
Ty for the video bro you bloody freaking legend 👏 have a good weekend/week brotha 😏🤙yaeeyaae 🫡 you think you'll ever the evo x job this yr bro 🤔
Rubber grease on order, Kevin? 😀
There’s still a bit to scrape out from the bottom of the barrel 😂🍻🍻
🤣
My semi auto 3008 Peugeot 2013 rocks forward and back when changing gear and shudders on pull off is this gear box or clutch as had clutch and flywheel done drives really bad lol like no joke drove like it for years Peugeot main dealer every garage in my areas dnt now u could make a whole video on my car its like riding a horse its rocks forward and back so bad you need a neck brace loool when in low gears if u ever in birmingham way i beg u drive my car see wot u think cars gave me anxiety looooool
Don’t attempt semi autos. You need software reset for it to ever work again.
@@WMCS iv had that done at main dealer in lower gears its rocks forward and back so bad u need a neck brace i think its clutch even tho i had done and even worse
👏👏👏👏💪💪💪💪💪
👍👍👍
❤❤❤🎉😊
Salut man!
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
😄👍❤️🇸🇪
jjk
..
like milwaukees