Audi A4 (B6, B7) 2002-2008 - How to replace spark plugs on a 2.0 L FSI engine - DIY Repair

Поделиться
HTML-код
  • Опубликовано: 18 окт 2010
  • Features BentleyPublishers' Audi A4 2002-2008 Repair Manual (B6, B7) - www.bentleypublishers.com/c/A408
    How to replace the spark plugs on a 2002-2004 Audi A4 with a 2.0 liter engine. For more information on Bentley Publishers line of Audi technical manuals, visit www.bentleypublishers.com/
  • Авто/МотоАвто/Мото

Комментарии • 63

  • @mathrawkerlastname5734
    @mathrawkerlastname5734 Год назад +1

    Finally, a video that takes care to show different methods of removing the clips from the ignition coils. I have broken them before trying to pry mine off. They get brittle! I knew there was some simple way to do this but I surely couldn't find it. Can't believe it's just a little pick. Thank you!

  • @rktrumble
    @rktrumble 11 лет назад +6

    Easy!!! I just did this job with my 14 yr old son, I am disabled, in 20 minutes. If we can do it, anyone can. Getting the clips off is the hardest part, used the pick idea and they came right off. Thanks for the video, you just saved me hundreds of dollars!!!

  • @BentleyPublishers
    @BentleyPublishers  13 лет назад +6

    @ripripstabstab The extention I used there looks like an 8 inch and the socket is 5/8" spark plug socket.
    Thanks for the feedback.

  • @johnmar78
    @johnmar78 11 лет назад +2

    awesome, you saved me 100$....that's was very helpful. Another Audi technical update....thanks again...

  • @nar83
    @nar83 11 лет назад +5

    It means to tighten the spark plug using an exact amount of force - no more, no less. You use a torque wrench to accomplish this - there are many types out there but each one has some method of letting you know how much torque you are applying. I don't advise performing this process without one. I bought a $25 "beam" style torque wrench at Sears, no need for a fancy pants one that clicks for this process IMO.

  • @rovpilot100
    @rovpilot100 9 лет назад

    Very helpful video, well done.

  • @andersonpaul418
    @andersonpaul418 8 лет назад

    very helpful. thanks brother!

  • @BeeShopcs
    @BeeShopcs 7 лет назад

    The best video. Can you make for intake hose thanks

  • @jamalhippolyte94
    @jamalhippolyte94 9 лет назад

    Great vid thank you very much

  • @BentleyPublishers
    @BentleyPublishers  13 лет назад

    @TheProgrammer NGK and other spark plug manufacturers do pre-gap spark plugs. Just check that it is the correct gap for your vehicle.

  • @esthernunez6868
    @esthernunez6868 9 лет назад

    Very helpful

  • @BentleyPublishers
    @BentleyPublishers  13 лет назад

    @farvuh4 It should be listed on the emission label in your engine compartment.

  • @lotop1
    @lotop1 11 лет назад

    This is great, how do I remove Check Engine Codes or will the car do that itself?
    Thanks

  • @davydao6765
    @davydao6765 4 года назад

    Good job!!!

  • @2tallB
    @2tallB 5 лет назад +2

    put the harnesses back on before snapping the coils down, that way you can still wiggle them a bit

  • @allstarsalmeida
    @allstarsalmeida 5 лет назад

    Thank you

  • @AnthonyNatoli
    @AnthonyNatoli 11 лет назад

    Just curious, what is the part number for an NGK sparkplug for a 2007 audi a4? I keep getting different recommendations and I don't know which to go with. Thanks!

  • @ashgabara
    @ashgabara 11 лет назад +1

    what do you mean when you say torque the spark plug to the proper torque speck? this is the first time i'm going to attempt this i just wanna make sure. also, with the torque wrench, how does it identify that i have properly torqued the spark plug? thank you.

  • @user-yl1zp5kp5k
    @user-yl1zp5kp5k 4 года назад

    In ElsaWin written, for replace ignition coil,you should be little bit raise up ignition coil,before unplug wire, using special hand tool. To make it easy for you, unplug wire from ignation coil.

  • @vietnamesedavid
    @vietnamesedavid 8 лет назад

    What is the stock spark plugs for a 2008 Audi A4 Quattro 2.0T?

  • @paulneumann7739
    @paulneumann7739 6 лет назад +2

    2006 Audi A4 2.0T spark plug gap manual says 0.035 or 0.889mm Personally I disconnect negative on battery and blow out the spark plug channel before loosening spark plug.

  • @nar83
    @nar83 11 лет назад +1

    *In this video they tell you to use 30 newton-meters or 22 ft-lbs. of torque at about the 2:20 mark of the video

  • @DadLeftForMilk
    @DadLeftForMilk 6 лет назад

    Do u know what a spark plug boot is for a Audi A5 2009 and would it need that? I’m not sure what one looks like

  • @YoGurlYvette
    @YoGurlYvette 3 года назад

    When removing all which order do you follow. Which is which? I got a faulty on ignition coil 4 (P0304)

  • @mymoney301
    @mymoney301 12 лет назад

    Would this work on a 2006 vw passat 3.6l??

  • @luisflores8637
    @luisflores8637 7 лет назад

    Hi people
    I own a 2007 Audi quattro b7 3.2 and I'm having got the code indicating I have a position control sensor out. can anyone tell me where this is located. thanks

  • @maricelagonzalez9958
    @maricelagonzalez9958 5 лет назад

    How do I know which is the number 2?

  • @louisgabrielle2154
    @louisgabrielle2154 2 года назад

    I have a 2008 Audi A4 quattro convertible 2.0 Do you need to torque the spark plugs? I don't have a torque wrench and how do you use it? It's my first time changing the spark plugs.

  • @jcb3354
    @jcb3354 9 месяцев назад

    should we change coil also?? thanks!

  • @nemanjamilosevic_7506
    @nemanjamilosevic_7506 3 года назад

    What is tightening torque for 2.0 FSI 110kw? (No turbo)

  • @b787sotelo
    @b787sotelo 6 лет назад

    What is the proper spark plug gap for the 2008 Audi A4 2.0T? I bought some NGK Iridium plugs and they're pre-gapped at 0.032 inches / 0.8 mm.

    • @deasttn
      @deasttn 6 лет назад

      Bryan S 32 is a good gap for the A4. I ran a larger gap and my car hesitated during acceleration

  • @renehernandez6661
    @renehernandez6661 8 лет назад

    What. is a coil # 3???

  • @adenfen4263
    @adenfen4263 7 лет назад

    please we need audi 2012 A6 ?

  • @ozgundemirr
    @ozgundemirr 10 лет назад

    do you need to unplug the battery first hand?

  • @aaronlewis5113
    @aaronlewis5113 4 года назад

    Hey I just did this for my 2008 Audi A4 Quattro and it attempted to start but ended up clicking, them I loosened them a little thinking there were too tight and just clicking. Can anyone help me? I can’t even put my windows up for the night.

  • @alextheromanian
    @alextheromanian 11 лет назад +7

    damn Bentley....would have killed you to go in all that detail and give a broke poor DIYer the spark plug gap spec? :)

  • @antonioguerrero1342
    @antonioguerrero1342 9 лет назад +1

    I need help i have a audi a4 2007 3.2 they change the the spark plugs and coil on i still have the check engine light getting on

    • @BentleyPublishers
      @BentleyPublishers  9 лет назад

      antonio guerrero
      Hello Antonio - What are the DTCs (Diagnostic trouble codes) you are seeing? This requires a scan tool or go to a large autoparts store and they can scan your car.

    • @antonioguerrero1342
      @antonioguerrero1342 9 лет назад

      Thanks @ Bentley publisher they scan the car and they said was cilinder 4 bad conbustion and they change all the coils and sparkplugs and the light turn off for few days and then turn back on what else can be

    • @BentleyPublishers
      @BentleyPublishers  9 лет назад

      antonio guerrero
      Hmm. Could still be a number of things. Have the tech look at fuel trim number. Check for other codes. what was the exact code definition? A bad mass air flow sensor can often only flag one cylinder. More diagnostics is needed. Too expensive to throw parts at the problem.

    • @sampsonjonah4119
      @sampsonjonah4119 7 лет назад

      Hello please help ! i have a 2006 audi a4 2.0t and my CEL flashes when i start the car. I took it to a mechanic shop that works on BMW,AUDI,PORCHE,VW cars and others and they charged me 600 for a new fuel injector. after that the car ran fine and wasn't shaking when at idle or startup. it was perfectly fine then the CEL came on again a few weeks later and the engine is rough when i start it and its leaking oil. i got my codes pulled up and i got P0304(CYLINDER 4 MISFIRE DETECTED), P0171(BANK 1 SYSTEM TOO LEAN),P0301(CYLINDER 1 MISFIRE DETECTED), P0300(MULTIPLE MISFIRE). I'm going to change my coils and see if that'll fix the problem. ill keep y'all updated.

    • @ForzaJuve001
      @ForzaJuve001 7 лет назад +1

      Hey how are you.? I was wondering what the results of your issues were. 6 months ago you wrote you had issues with P0171 Code on your AUDI..?

  • @Prolojg
    @Prolojg 11 лет назад

    my gap was 0.028 inches for 2008 b7 model

  • @farvuh4
    @farvuh4 13 лет назад

    What's the gap on the plugs? I have an 07 A4

    • @michaelcampbell6643
      @michaelcampbell6643 6 лет назад

      Just bought plugs for my 07 A4 today pregapped at .044 specs called for .032 gap on my turbo 4cyl

  • @skar516
    @skar516 6 лет назад

    What size is a spark plug socket ??

    • @deasttn
      @deasttn 6 лет назад

      skar516 my socket set came with a deep socket plug remover, and I think it is 5/8"

  • @_ColeJackson_
    @_ColeJackson_ 2 года назад

    So what all is needed

  • @valleyvalintino6245
    @valleyvalintino6245 2 года назад

    Bank robbery movie called the ambulance

  • @Miltonbosss
    @Miltonbosss 5 лет назад

    You say 2002-2004 ??? But the video shows 2002-2008??

  • @deasttn
    @deasttn 6 лет назад +3

    The hardest part is removing those dang plastic connectors. I snapped all 4 of mine:-(

    • @MrChriz333
      @MrChriz333 5 лет назад

      deasttn same.

    • @half_r_mk5
      @half_r_mk5 5 лет назад +1

      the trick is to pull the harness in, press the button connector and then push out. the harness should disconnect with ease.

  • @THECONDOR98
    @THECONDOR98 6 лет назад

    Sticky lips

  • @JoeyMe
    @JoeyMe 12 лет назад

    The voice is somewhat gayish

    • @LukaDaudt
      @LukaDaudt 6 лет назад +3

      You must be really insecure if you think a voice can be gay. I wonder how carefully you enunciate words as to not sound gay.

    • @edwindominguez2548
      @edwindominguez2548 6 лет назад

      Lucas Daudt he does sound gay

  • @noiztrauma
    @noiztrauma 10 лет назад

    Very helpful video, well done.