I HATE sanding PLA. My personal hell is an eternity of sanding PLA. The sound, the smell, the feel…it just offends all my senses.Just watching you do it is upsetting…😂😂😂
🤣🤣I sooooo feel that. I need to try out resin smoothing and see how that works. My hand is aching just thinking about the sanding on the battle droid.🤣
Thanks some much!!!! I used less than 1 chrome paint can since I was just spraying it in random spots that I thought might be an area where it would chip. This is a link to the speaker I used on Amazon: I am trying to make a mouse droid with the same speakers. amzn.to/3Yr8GTu
Good luck on your build. It is totally worth it. Here is the link on Amazon, but there are many variations on this: www.amazon.com/Microsound-Activated-Reminder-Welcome-Supermarket/dp/B07FCHRH8P
Thanks so much! No problem. The masking fluid was Liquitex Masking Fluid in a 4oz bottle. The tan color is Montana Gold, Sahara Beige spray paint, it seems like what a lot of people are using.
I’m not sure, but I think you got the size wrong. You have to switch them to the other side look at the documentation you got it reversed you’re gonna have to separate it because I remember going through that and it was a mistake.
Hello. I have a question - what printer did you use to print the largest, most voluminous parts? And secondly, what printing area would the printer be recommended for to implement such a robot? I've been wanting to create something similar for a long time.
@@thelegendarygalaxy17 Thanks 🙏 👍 I'm gradually learning 3D printing and thinking about how to start creating b1. I have a little question - what did you use to glue the different parts of the droid together? (Sorry if I write with errors. English is not my native language. I translate using Google translator)
@@thelegendarygalaxy17excellent ty. One other question. Any reason you went with white instead of gray or black. Wouldn't the latter be easier to see sanding lines etc.
@@thelegendarygalaxy17 Do you know offhand, for instance, the rustoleum spray you sprayed, i assume you did that coat outdoors or well ventilated, but, spray cans shouldnt be done in a basement even with an "airbrush" style booth that is vented?
How much much would you charge to make again the... 3dprint Derjarik Table... parts with out assembly plus shipping? I'm seting up star wars room. An it missing some StarWars. Props
Ok...Fantasic Work..Worth A shot to ask...I just dont have a 3dprinter an no time to.. i always watchin my family an/ brother SIX kids....Awsome job again on StarWars prop and diorama..
Sure! That's cool you are going to make a head! The Beige is: amzn.to/3XdI0ER This is the primer: amzn.to/3z6wTG0 And this is my favorite Chrome: amzn.to/3Xu0xy3 This is the masking I used: amzn.to/3Z7JfYP
Hi. I just kind of use the default. I am no expert on settings. I just used the recommend wall thickness and infill percentage that are in the Droid Division instructions. Like thicker walls and higher infill (15-20%) for smaller joints and then reducing infill on the head so it does not get too top heavy (5%).
Roger Roger! The torso print alone is commendable. Amazing build from start to finish, I really enjoyed watching.
Thanks! and thanks for watching!!!!
Absolutely stunning work here. If you don’t receive a job offer from Disney, I will be quite shocked!
Thanks so much!
Great results. He looks amazing
Thanks so much!!!
Wow, what an incredible build. Thanks for showing the process, I love what you did with the chrome chipping. Awesome video.
Thanks so much!!!!!!
Cool dad alert!
Fantastic
Thanks!!
this dude is talented
Thanks man!!! Really appreciate it!!!!
Looks amazing!
Thanks so much!!!!
Looks amazing!!!! 🤩
Thanks so much!
How does this only have 2.5k views?!
I know right!!!😂
@@thelegendarygalaxy17 have you thought about using a resin printer? Less work smoothing out print lines
I have a Saturn 2 but it’s way to small a build area I think
I have been looking at them, but have not yet decided what I would use it for yet.
You are a legend!
😳
wow wow it looks so good! good job!!
Thanks so much for the nice comment!!!!!
sir, great work as always. thanks for sharing
Thank You!
Awesome job
Thanks so much!!!
Awesome!
THANKS!
Love it
THANKS!!!!!
I HATE sanding PLA. My personal hell is an eternity of sanding PLA. The sound, the smell, the feel…it just offends all my senses.Just watching you do it is upsetting…😂😂😂
🤣🤣I sooooo feel that. I need to try out resin smoothing and see how that works. My hand is aching just thinking about the sanding on the battle droid.🤣
🔥🔥🔥🔥🔥🔥
Thanks!!!!!!!
Pro tip: paint on some UV resin and use a UV light to cure to SIGNIFICANTLY reduce sanding time
Thanks! I will give it a try on my next project.
Roger Roger!!!!
Hello i love your Project and i do the same! How many filmer and paint did you need?
Great work!
Thanks so much. I think it was 5 cans of filler primer and 3 cans of the tan color, 1 yellow color and 1 chrome.
Amazing
How much filament used?
Don't Looks cheaper
Congratulations 🎉
Excelent work
Thanks so much. About 14 rolls of filament with the blaster.
GREAT WORK HOW MANY CHROME PAINT CANS DID YOU USE? WHERE DID YOU FIND THE SPEAKER?
Thanks some much!!!! I used less than 1 chrome paint can since I was just spraying it in random spots that I thought might be an area where it would chip. This is a link to the speaker I used on Amazon: I am trying to make a mouse droid with the same speakers.
amzn.to/3Yr8GTu
Awesome work! Would you mind linking the voice board you used?
Thanks!!!! Here is what I used. www.amazon.com/Microsound-Activated-Reminder-Welcome-Supermarket/dp/B07FCHRH8P
Amazing job! I am currently printing me one and I appreciate your tips. Do you have a link for that electronic voice box?
Good luck on your build. It is totally worth it. Here is the link on Amazon, but there are many variations on this: www.amazon.com/Microsound-Activated-Reminder-Welcome-Supermarket/dp/B07FCHRH8P
That’s awesome! Do you know what the recommended bed size at least to do this print? Can’t seem to find any details
Thanks so much! My printer is a 12.59x12.59x15.74 inch bed size and it seemed just large enough.
This looks great! Could you tell me what masking fluid you used? And what color tan you used?
Thanks so much! No problem. The masking fluid was Liquitex Masking Fluid in a 4oz bottle. The tan color is Montana Gold, Sahara Beige spray paint, it seems like what a lot of people are using.
I’m not sure, but I think you got the size wrong. You have to switch them to the other side look at the documentation you got it reversed you’re gonna have to separate it because I remember going through that and it was a mistake.
I’m sorry, the thighs, the wrong you have to reverse them
OH WOW! I did not even notice. You are totally right. Thanks for letting me know. It was an easy fix, I just put the legs on wrong. Thanks!!!!
Roger Roger
Thanks again for your help, I have one last question: what sealant do you use to hide the joints at the calf?
No Problem, glad to help. I use Bondo, and bond thinned out a little. There are lots of videos on how to use it.
can you give me a purchase link for the bondo and diluent?
@@Schilthorn02 So sorry. I just got it at an auto parts store and I dont remember the exact kind, but is is a reddish color.
When you said 1 filament roll are those 1kg?
Yes. 1kg roll (2.2 lbs)
What size bolts did you use for the Outer Neck Cylinders to the Inner Neck Cylinder ?
I think that was two 35mm M6 bolts with 25mm barrel nuts
@@thelegendarygalaxy17 Thank you just started on mine
Hello. I have a question - what printer did you use to print the largest, most voluminous parts? And secondly, what printing area would the printer be recommended for to implement such a robot? I've been wanting to create something similar for a long time.
I have an Elegoo Neptune 3 plus. It has a 320x320x400 mm build plate. Thanks for watching!🙂
@thelegendarygalaxy17 Thank you😊👍
What thread (filament) do you use?
@@АндрейПеляев I like this filament and have bought about 30 rolls of it with great results amzn.to/3YZXY7Q
@@thelegendarygalaxy17 Thank you😊
@@thelegendarygalaxy17
Thanks 🙏 👍
I'm gradually learning 3D printing and thinking about how to start creating b1.
I have a little question - what did you use to glue the different parts of the droid together?
(Sorry if I write with errors. English is not my native language. I translate using Google translator)
Awesome stuff. Which brand pla did you use. Is it pla plus? Do you have a link to that device that says Roger Roger?
Thanks!!!! I use this PLA
amzn.to/4fCLcBC
and here is the device I used for the sound:
amzn.to/3ADkZ7c
Thanks for watching!!!!
@@thelegendarygalaxy17excellent ty. One other question. Any reason you went with white instead of gray or black. Wouldn't the latter be easier to see sanding lines etc.
@@markm75 I have just always just liked white for painting on, but you might be right, black might be easier to see the sanding.
@@thelegendarygalaxy17 Do you know offhand, for instance, the rustoleum spray you sprayed, i assume you did that coat outdoors or well ventilated, but, spray cans shouldnt be done in a basement even with an "airbrush" style booth that is vented?
Yes. I sprayed it all outdoors.
The chrome paint was this:
amzn.to/3Xu0xy3
The filler primer was this:
amzn.to/3YR5uki
How much much would you charge to make again the... 3dprint Derjarik Table... parts with out assembly plus shipping?
I'm seting up star wars room. An it missing some StarWars. Props
Thanks for asking but I don't really do that. I think there are places that do that though. Best wishes setting up your Star Wars room.
Ok...Fantasic Work..Worth A shot to ask...I just dont have a 3dprinter an no time to.. i always watchin my family an/ brother SIX kids....Awsome job again on StarWars prop and diorama..
Where do you get blue print or diagram to make starwars props?
Could you link the paints you used for this? This video motivated me to buy a head!
Sure! That's cool you are going to make a head!
The Beige is: amzn.to/3XdI0ER
This is the primer: amzn.to/3z6wTG0
And this is my favorite Chrome: amzn.to/3Xu0xy3
This is the masking I used: amzn.to/3Z7JfYP
@@thelegendarygalaxy17 Thank you so much! So excited!! What did you use for the yellow commnader markings?
No problem. Have fun!
They yellow was this: amzn.to/3XaQOLT
What did you use as a stand?
It did not use a stand. It is self standing, but there is a file for a stand you can print in all the files.
what printer are you using?
A Elegoo Neptune 3 plus with 320x320x400 mm build plate. Thanks for watching!!!!
How much filament did u use
About 12 rolls with the blaster. Thanks for watching.
can i get your settings i use the el max
Hi. I just kind of use the default. I am no expert on settings. I just used the recommend wall thickness and infill percentage that are in the Droid Division instructions. Like thicker walls and higher infill (15-20%) for smaller joints and then reducing infill on the head so it does not get too top heavy (5%).