Yuri do not explain yourself you do great work the more your channel grows the more haters you are going to have you can't give in to them you have to overlook them you're doing an awesome job bro
Maybe invest in a two axis laser with auto levelling. It might help you a lot when trying to determine if something needs to be pulled up or down. They're not that expensive either. Good work as always Yuri. Top guy.
You're worth way more than $50 100 dollars at the least to have you go down there and look at a car don't ever downplay or quality. I do that to myself all the time with irrigations here in Florida I'm a 35-year-old man and sometimes life goes so quick you forget. Your work in my opinion is TOP NOTCH. for someone to have one of y'all go look at a vehicle at auction y'all should at least make $100 to 200. I charge just to do one irrigation head $100 if it's broken and I have to replace whatever type of pop-up,rotors, dripline whatever it is it only takes me like 10min. To 30min. What I'm saying people are paying for your experience y'all are all a bunch of really good young men and you're not bums y'all have a good New Year Florida man out
You're pops sound like my pops when I used to work with him. I would always want to order new parts. He tell me " I'm looking for a bargain not to go bankrupt". I get it 100% there's no easy just order parts lol.
brother! dont bother about one comment, these are obviously people that looked in theyr mirror and didnt like what they saw. keep up your awesome work going, really enjoy your content.
2000 Toyota Avalon XLS with 50K miles in perfect condition recently rear ended and totaled by insurance with $5K damage. State Farm only paid $3500 for salvage. I had it repaired at a shop that always does perfect work. No frame damage but substantial rear body work and parts. Car looks and drives brand new. Where could I have got a replacement for $3500? Kicking in $1500 to keep my mom and dad's car, may they RIP, was worth it to me.
I wouldn't worry at all what the youtube trills say when it comes to their beliefs, how ever, I do appreciate the greater details you've shown in this episode. Thanks for making great content.
Dude like how you explain in detail all your steps. Most car videos are about blah blah blah. Yours gives helpful tips to us out there....Keep up the good work and EXPLAINING....
Don't even mention those haters you have more talent in your little finger than most people have in their whole body. I have seen some of your fabrication work it is amazing keep up the good work and the good content. Look forward to every video
Do not take me wrong, I don't want to knit pick your work. As a self taught frame guy myself, I guarantee you that it makes your job tons easier to invest in a true tram system and make sure your frame table it level with the earth. That way when you clamp down a car and can measure your pinch rails against the deck. You are assured that the vehicle is level with the earth. Then the tram has a bubble level built into it. You can check square and level at the same time from side to side. It saves you so much time and 2nd guessing.
Yuri and Nate, another great and imformative video. Thanks for the great content. Yuri I can relate to your suttle sarcasm. I find it humorous.I can't get mine across to my friends and familly as humor. They think I'm just being a ass!
I'm so glad someone is taking about the pitfalls of purchasing a vehicle sight unseen. Getting stuck with that car that can't be saved happens more often than people realize. Solid advice Yuriy 👍
These frame repair videos are brilliant. Took me 2 years to find a bodyshop willing to replace a frame rail on one of my cars. The answer I got from the dozen or so places was "nah its not worth our time, no money to be made doing that". I could never understand this response because I wasn't asking for a discount or a special price. I was willing to pay whatever it took to repair it. But it was explained to me that in the time it takes to do a complete frame rail replacement they could have 2 or 3 easy and more profitable insurance jobs done.
Hey Yuri, it's fantastic that you are helping Ben out, the content on your channel is great. I remember watching Vin helping the Goonzquad boys out on the framing machine and I'm fascinated by the work you do. Keep up the great work and content mate. Cheers from Perth, Western Australia.
That pull up in the red truck was smooth bruther 👍. Your family are gud people, you all help so many who may not have deep pockets. Keep up the gud work
Love the framework and you are explaining a lot to me over things did not even thougt about it ! And Nathan is a very good cameraman and editor, loved this video !!!
Found you yesterday and I've been going through your other videos. I'm in the UK and buy a few damaged cars for myself. We struggle over here with people to do heavy damage. A lot of places aren't interested in heavy damage cars to repair. Keep up the good work I've liked and subscribed
Another great video and yes, you don’t want to ever buy a car , especially at an auction, sight unseen. You never know what you’re getting but the Honda can be done obviously but is going to be a lot of work. Great job and don’t sweat the haters.
22:15 I got a chuckle on how your dad does things, umm, differently. It reminded me of my own late dad; his way of doing things only made sense to him.
You should get yourself a green laser they are self levelling and project horizontal and vertical lines great for lining up the front and centre of hood etc.
Bro, I like your new year's resolution lol. Your haters probably never seen a frame machine. You guys do awesome job, just please buff out of those swirl marks on the frame machine created by your microfiber cloth.
Yuri it's hard to tell if you and your brother are a class act because of how you all put so much into the work. Or how you determine how to handle & plan out the work that displays what a class act, you and your brothers are!! Either way, you guys are truly pro's!!
I wrecked my f150 in 2002 helping a black steer at night on the road. It wisted the whole chassis and wrecked the engine bay area. The cost of the repair was greater then scraping it.
If you want a friendly advice from denmark yoy should get your self a cross laser mountet on the wall behind you then you would always have the centerline off the car , and i you have it be height adjusteable the you can get the heigt centerline off the framerails also . Sorry or any mispellings
I love the content I love the expertise work you do with a lot of talents and I love your explanations it is another talent added to my favorite channels besides Goonzquad and VTune good luck 👍 and keep up the amazing contents
Yuri do not explain yourself you do great work the more your channel grows the more haters you are going to have you can't give in to them you have to overlook them you're doing an awesome job bro
100%
Maybe invest in a two axis laser with auto levelling. It might help you a lot when trying to determine if something needs to be pulled up or down. They're not that expensive either. Good work as always Yuri. Top guy.
You're worth way more than $50 100 dollars at the least to have you go down there and look at a car don't ever downplay or quality. I do that to myself all the time with irrigations here in Florida I'm a 35-year-old man and sometimes life goes so quick you forget. Your work in my opinion is TOP NOTCH. for someone to have one of y'all go look at a vehicle at auction y'all should at least make $100 to 200. I charge just to do one irrigation head $100 if it's broken and I have to replace whatever type of pop-up,rotors, dripline whatever it is it only takes me like 10min. To 30min. What I'm saying people are paying for your experience y'all are all a bunch of really good young men and you're not bums y'all have a good New Year Florida man out
You're pops sound like my pops when I used to work with him. I would always want to order new parts. He tell me " I'm looking for a bargain not to go bankrupt". I get it 100% there's no easy just order parts lol.
brother! dont bother about one comment, these are obviously people that looked in theyr mirror and didnt like what they saw.
keep up your awesome work going, really enjoy your content.
Yuri "what up bro" well done my friend. Love your positive attitude, keep up doing what you do. You guys rock. Shaba
2000 Toyota Avalon XLS with 50K miles in perfect condition recently rear ended and totaled by insurance with $5K damage. State Farm only paid $3500 for salvage. I had it repaired at a shop that always does perfect work. No frame damage but substantial rear body work and parts. Car looks and drives brand new. Where could I have got a replacement for $3500? Kicking in $1500 to keep my mom and dad's car, may they RIP, was worth it to me.
You did the right thing. That Avalon will last you a very long time.
I wouldn't worry at all what the youtube trills say when it comes to their beliefs, how ever, I do appreciate the greater details you've shown in this episode.
Thanks for making great content.
Dude like how you explain in detail all your steps. Most car videos are about blah blah blah. Yours gives helpful tips to us out there....Keep up the good work and EXPLAINING....
Don't even mention those haters you have more talent in your little finger than most people have in their whole body. I have seen some of your fabrication work it is amazing keep up the good work and the good content. Look forward to every video
Love your honesty and sticking with unfailing integrity. Keep plugging away.
Love the honesty Yuri, ignore the haters. Keep doing what you are doing.
Do not take me wrong, I don't want to knit pick your work. As a self taught frame guy myself, I guarantee you that it makes your job tons easier to invest in a true tram system and make sure your frame table it level with the earth. That way when you clamp down a car and can measure your pinch rails against the deck. You are assured that the vehicle is level with the earth. Then the tram has a bubble level built into it. You can check square and level at the same time from side to side. It saves you so much time and 2nd guessing.
Good times Yuri and Nat thanks for your video 👍
Yuri and Nate, another great and imformative video. Thanks for the great content. Yuri I can relate to your suttle sarcasm. I find it humorous.I can't get mine across to my friends and familly as humor. They think I'm just being a ass!
Love watching the frame work as that is where the skill is
When you have more views than subscribers, you know you're doing something great😎😎😏😏
And that’s why I subscribed and told other people to subscribe as well. that this guy is Legit. Love to see Family First Mentality.
People always have to say something stupid.keep up the good work.
YURI, yalls channel is great keep it up guys ! Y’all growing quick. That’s a good offer to have y’all do a prepurchase quick inspection.
Great content, love the detailed explanations of the frame work 💪🏻
Nice to know you guys are honest ppl with a conscience 👍👍👍👍👍🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧👍👍👍👍
I'm so glad someone is taking about the pitfalls of purchasing a vehicle sight unseen. Getting stuck with that car that can't be saved happens more often than people realize. Solid advice Yuriy 👍
These frame repair videos are brilliant. Took me 2 years to find a bodyshop willing to replace a frame rail on one of my cars. The answer I got from the dozen or so places was "nah its not worth our time, no money to be made doing that". I could never understand this response because I wasn't asking for a discount or a special price. I was willing to pay whatever it took to repair it. But it was explained to me that in the time it takes to do a complete frame rail replacement they could have 2 or 3 easy and more profitable insurance jobs done.
Yuri....the condensation from your breath might have corroded the frame machine? Get some rust preventer on it ASAP!
Great vlog matey!
Hey Yuri, it's fantastic that you are helping Ben out, the content on your channel is great. I remember watching Vin helping the Goonzquad boys out on the framing machine and I'm fascinated by the work you do. Keep up the great work and content mate. Cheers from Perth, Western Australia.
great job
Yeah, awesome stuff. That's all of you guys. Glad to see how professional yet light hearted you guys are.
That pull up in the red truck was smooth bruther 👍. Your family are gud people, you all help so many who may not have deep pockets. Keep up the gud work
Good job from start to finish keep up the good work . Happy New year to all at your dad's garage from myself Davy from belfast northern Ireland peace
Watching from Hartford Connecticut dope content guys
Love the framework and you are explaining a lot to me over things did not even thougt about it ! And Nathan is a very good cameraman and editor, loved this video !!!
Found you yesterday and I've been going through your other videos. I'm in the UK and buy a few damaged cars for myself. We struggle over here with people to do heavy damage. A lot of places aren't interested in heavy damage cars to repair. Keep up the good work I've liked and subscribed
Congratz on the baby,Vlad!
I love your work ethic, you and your bros are doing an awesome job.
Love that you have integrity.
You guys are on a roll. Keep em coming! Excellent presenting.
Huge fan! You guys are Killin it
Love watching y’all work. Another fantastic job!
yuri spittin knowledge. 💪💪💪
I like the way you try to explain the problem and show how you will fix it,good tutorial keep it up and do what you gotta do.👍👍👍😎😎😎
Another great video and yes, you don’t want to ever buy a car , especially at an auction, sight unseen. You never know what you’re getting but the Honda can be done obviously but is going to be a lot of work. Great job and don’t sweat the haters.
Looks Great
22:15 I got a chuckle on how your dad does things, umm, differently. It reminded me of my own late dad; his way of doing things only made sense to him.
So did I, dads will be dads, love them while they are with you, I know it can be hard to do at times 😃
i like your attitude towards the mountain of work you get man. Shows your passion for cars and repairing. Best of luck !
You should get yourself a green laser they are self levelling and project horizontal and vertical lines great for lining up the front and centre of hood etc.
Another great show nothing more to say 👍😀
Another great video brother
Learning alot, great stuff.
Great Vlog !! .................... Bless
Bro, I like your new year's resolution lol. Your haters probably never seen a frame machine. You guys do awesome job, just please buff out of those swirl marks on the frame machine created by your microfiber cloth.
Good content, nice side stories, good descriptions and good humour to lighten the mood. Nathan needs more walk on parts bring on the young talent.
buffing the frame machine, LOL! i'm dying 😂
Yuri it's hard to tell if you and your brother are a class act because of how you all put so much into the work. Or how you determine how to handle & plan out the work that displays what a class act, you and your brothers are!! Either way, you guys are truly pro's!!
11.9K already.You guys have earned allot more than that,and they'll be here.Great tips,and a few laughs too.
I watch all your channels. Great wit, don’t go too hard on Nathan😂😂
I love this channel 👌👍 happy new year guys
I always use the frame rack itself for my measurements no need for all that special equipment when I got a tram gauge and a tape measure
Nice work man. love your videos
You do just as good as your brother and dad but you can't always please everyone
Awesome, I like how you explain your process of repair. Good Job!
💯💯 Recommended! you Guys are every day better and better in the channel, keep with the great job!!!!!!!!
Hard work, attention to detail only at 23 Garage.
Good video
Nice work, and attention to detail !
Keep up the good work guys!!!
I wrecked my f150 in 2002 helping a black steer at night on the road. It wisted the whole chassis and wrecked the engine bay area. The cost of the repair was greater then scraping it.
I love the chanel great work
Mate don't explain yourself to people your work is 100% your always going to get haters f them !!! Keep up the good work
Good job men. keep warm and keep up the good work
Great content and great work! Thanks guys
Keep Rocking Dude.
Interesting about salvage vehicle.And also keep up the good work
Keep the videos coming your almost at 100k subs. 😅
Hurie your brother iis learning well too. Don't worry about the negative comments too much . You know well what your doing.
Great job.guys.just advice to install more light on the side of frame machine for video quality.. otherwise 5+
At least it is not an i8 that has been hacked together. :)
"pretty good friend of mine" -lol
Keep up the good work bro
Seems like he’s always trying to save a buck 🤣🤣 my old man is the exact same way. Always somehow turns out mint too.
You do awesome work.
Don't worry about negative comment's
Great content Yuri!
Nice work 💪
Great informative videos! keep them coming!
Another great project!
Very informative. Thank you and good work !
If you want a friendly advice from denmark yoy should get your self a cross laser mountet on the wall behind you then you would always have the centerline off the car , and i you have it be height adjusteable the you can get the heigt centerline off the framerails also . Sorry or any mispellings
Love the content. I'd like to see some better lighting. 👍
With that first car, I would probably replace it as well.
i love your sense of humor, lol!
I love the content I love the expertise work you do with a lot of talents and I love your explanations it is another talent added to my favorite channels besides Goonzquad and VTune good luck 👍 and keep up the amazing contents
Man you the truth Yuri real shtt homie!
In this time that we're now living in parts are hard to find! Give pops a break, he's doing the best he can!🤣🤣
Do they make special microfiber cloths for cleaning framing racks? Can't be too careful!
Can the Air Bags Pop when you hit the rebar with the hammer like that??? Aren't the crash sensors mounted to the rails right by the rebar.
doing good boys keep it up good work
“I want the Austin” Is that a 401 in the background. Now I know where he’s sourcing his parts from 😂
Whats funny is vlad made a video saying not to buy a car site unseen and then did it himself
Nice you offer to look at a car for $50
Great Job. Maybe you should use a Laser level is very good.