No soldering hack to fix range rover l322 ignition wont turn problem with $1!
HTML-код
- Опубликовано: 1 окт 2024
- No soldering hack to fix range rover l322 ignition wont turn problem. 15 min fix save one thousand dollars
【Super-changed Range Rover HSE】
【Part 1 】
10 minute fix to make your plastic parts look new again on range rover l322
【Part 2】
No soldering hack to fix range rover l322 ignition wont turn problem. 15 min fix save one thousand dollars:
For anyone trying this , solid blue wire at the steering column and the striped one by the light. Saw that no one answered the question and I had to trial and error to get it. Good luck.
This happened to me last week completely out of the blue after I left my ignition on by mistake while I was valeting the car, 20 mins later I couldn't turn my key but it had been fine before ? Tried charging battery and reprogramming keys but no joy, did this fix and worked perfectly immediately..... lots of owners report this and tons of cheap fixes ( no need for replacement column ) but this one is THE best, simple and cheap .... thank you Sir, you're a star !
My truck sat for 3 weeks none of the local mechanics would touch it and on top of that my punk ass landlord had it towed by one of his buddies that own a tow company it cost me $300 to get it back,I scanned RUclips for help and found this video,I followed his instructions and fixed it right in my driveway in about 20 min that was a month ago and no more starting issues.
🙏
Almost 2 years, I have the same issue. And 2 times paid $300 landrover towing company then after 2 weeks they couldn't fix it
Subscribe to you because you’ve got more fixes coming on your channel? When are they coming? After you watch someone else’s video and duplicate it. The truck has nothing on you? You mean has nothing on the persons video you copied. At least give the man credit seeing as how you did a horrible job explaining which blue wire… this way the people that need to bypass this doesn’t go chopping up the wrong wires and not sealing the first wire they bit into to prevent corrosion which is a huge issue with these vehicles due to all of the moisture in them. L322 has everything on you. This is the most amateur way to do this repair and a good way to make sure you’re completely stuck when the wire fails over time because you don’t have the tools on you to remove the cover. If you’re not going to do it the proper way and solder it, the at least, at bare minimum use heat shrink but connectors to ensure there’s no issues with the wiring in the future.
I’m not hating by any means… customer comes to my shop for repair and I go in and I see something like this and ask him where they learn to do it and they tell me RUclips I can’t help go look at the videos and see who is causing this madness… there is a reason why the original content creator recommended soldering the wires…. Because it’s the RIGHT way to do it.
Like I said I wouldn’t have had an issue or me to comment at all. Had you not acted like you came up with an easier alternative… your excitement clearly showed that this was your first time doing this, and that you clearly memorise what wires the cover from the previous video or Splice into super perform hack job. The excitement displayed was the excitement of someone, not sure if it was going to work or not and to their disbelief. It worked. Let me know when you copy your next video so I can be sure to explain to you how you fuck that up too. Sure the people that get their car started are going to be happy and thank you but eventually when it fails and given enough time, it will fail. Then they’ll understand. There is a reason these type of connectors arent in vehicles from the factory. Or why no service manual ever will you see it recommended for you to do this.
Awesome video and presentation. Thanks for helping to keep us passionate L322 owners on the road
The same question has been asked and still no answer from this guy. 😂
Help!!! My steering wheel unlocked, taking fuse 18 out does nothing
LOL! You the man! You solved 2 years of me pulling out the fuse and putting it back in!
I did.that for two weeks and i couldnt stand it already. Cant believe yoh didnthat for years!
How’s this fix holding up still?
What Fuse?? My car also not starting
So explain me please the column steering she have to be blocked or not
Came back to this post, I’ve done it and it’s been a lifesaver!
Advise to people who need 9 min long instructions how to use torx screwdriver - leave it to professionals!
The rest can start watching from 9:00
I did the fuse & the harness & still doesn’t work. Mines stuck in the unlock position
I got a 2005 hse from a auction, 94,000 miles on it. Now I know why the owner abandoned it! I cant see where on the video you ran the wire from the column to the light at the bottom!
You route it through the plastic steering cover
@@robertsautosexplorerweeken5682 which wire excactly I see three with blue on it and it’s not the blue and black stripe … ?? I don’t want to fry anything
I think is cheaper to burn it and buy a Toyota Landcruiser.
I RALFAROMEOD so hard I peed!
@@radleybradford1356 do you squat or stand. There is a remedy.
Fantastic video, sorted my issue out, followed your step by step instructions. took no longer then 20 minutes - many thanks
Glad to hear it.
I cant believe how many people have the same issue. Glad the video helped
@@robertsautosexplorerweeken5682 I think the failure rate is close to 100%, quite honestly.
You don’t tell us which wire has to be connecting on the steering column which color
Came across this video. Like the way you described and fixed it. So subscribed at once
Very good My friend thank you
Thanks for posting! I have the same year, no issues on the column yet... ready to do this
Great video!! Keep em coming
Thanks so much, I tried your fix and it worked just like you explained saved me a lot money really appreciate this video great job....
Which wore to connect to ? What the color of the steering column wire ? Thanks in advance
what color ?
Hi. Please help me out. I was doing on my wife car is 2006 hse. But if I lock the vehicle the interior light is on Please let me know what I was doing wrong?? Thanks
I’m trying this hack. On the dome light, which is positive, the red wire, or the brown wire? At the steering column, I have 2 blue wires. One blue wire has a black stripe. Which blue wire do I tap into? Thank you for your time.
I tried this , everything looked good all lights on dash but no start now,nothing at all??
Double check your wiring connections to see if you have all the connections correct. If it doesnt work, you have other issues other than the locking device
I got there thanks! A dodgy fuse!!
@@kieranhassett5862hey do you remember which fuse it was by any chance? My 06 l322 left me stranded when the key wouldn’t turn, when I jump the connection under the steering I can get the key to turn but still won’t crank/start.
I’d appreciate the help a lot.
I believe I'm having the same issue,i just bought one & it's not starting.the guy i bought it from is saying that everything comes on but it won't start.i took it to a repair man & he thinks the transmission has gone up because the truck won't lock into park.
We're supposed to connect the blue wire from the steering column to one of the wires below? But the wire use below was white?
He ran the white wire to connect the two
For almost 2 years, i have been messing with this problem .delarship couldn’t fix .now i watch 3 times your video times times, and i have a plan to try when sunrises .but it does make sense
Thanks for the tip, it has work for my l322!! Its funny how its Always a suprise when it works😂
Hello someone please help me my column its not blocked but my car she not turn nothing, I put new baterry but nothing.
Hello, what is not seen in the video is to which pin of the connector you have to put the current of the light.
I want to know also there are three wire with blue on that steering connector lol one solid one blue black and the last black with blue …. It’s Deff not the blue with black stripe…
Did this fix it no longer locks but now won’t crank over what did I do wrong?
Здравствуйте. Помогите пожалуйста!!!! В морозы машина стояла 10 дней, запустил её, она поработала 15 мин и заглохла. Причина была что подвисли клапана, из-за этого не было компрессии, подняли компрессию слив масло с двигателя -разогрели и залили, и по не многу масла в отверстия куда свечи вкручиваются залили, акб ставили с зарядным устроиством на "Пуск" и крутили, в итоге появилась компресия , клапана встали на место, машина заработала. Но это был последний день дома и мне нужно было уезжать в командировку на 30 день, как приехал, пропала искра. Ток(питание есть на катушки, а как начинаешь крутить стартером то пропадает. Ключь зажигания вставляется и крутиться и зажигания горит но стартер не крутит. Я стартер кручу замыкая реле стартера. Датчик коленвала новый поставил. Датчики распредвала из-за них искра не пропадает, из-за них плохо запускалась бы и временами глохла. АКБ новый. Свечи новые. Думал имобелазер но тогда наверное ключь бы вообще личинку зажигания не провооачивал что включает зажигание, а может защиту и дает что искру блокирует. Помогите пожалуйста, всю голову сломал, уже не знаю что делать. Сдался я. Рендж Ровер м62,4.4
What gauge wire is needed? Can you share a link for the wire crimp parts?
will this work with a 2002 model?
Do you happen to recall the gauge wire you used?! I think mine was alittle too big for the application.
Did what video by pro key turns started once now will not start yet key turns
Hello my car already has a button on off attached to the fuse, if i take a wire from the light and join it with the button will it work?
Great video! Thanks for the share!
Do you cut the wire in the steering column or do you just splice in another wire to it?
Top man ! I'm going to try that myself, as this is a very common problem when battery is drained or immobilizer problem with old keys being recognised 👍
Hey, did that hack work for you?
My batt is good but my keys are old and beat up
@@CHR... hey I needed this my truck is at the mechanic right now! Gonna share this with him
Bonjour , la lampe a deux fils un marron et lautre rouge stries bleu c'est le quel je dois choisir, cordialement
Mr here are three blue wires, which one? Also on the other end where the light is which wire? Thanks
Which wire did you connect under the dash to the light? My wire color is brown and red&blue.
Blue
Bonjour, ya deux fil à la lampe un marron et l'autre rouge avec une ligne blue le qu'elle t'a choisi ? Merci
Hello thank you for the video, can you tell me the color of the cable at the top and that of the cable at the bottom please
I have same your care I changed the battery and the car won't start and the dash won't work
This is a fix for ignition lock problems. Yours sounds like something different.
Make sure you didnt reverse your polarity
I pulled the cables and i see blue wire tripped with black. Is it supposed to be solid blue color cable?
smart
And what to do when the middle bolt won’t come loose from the steering column and is stripped?
I suggest the #18 fuse trick, where you wire a on off switch to the slot. Look into that, well anyone else this is four months old question ha
hey my over heated and now it won’t starts all i hear is the starter what should i do the bult is spinning
Здравствуйте. В чем проблема была?
Tried it but rover wouldn't start 😅
Sweet baby Jesus! I have to try this
Will it work for my 2003 HSE ?
Excelente pots.
Did you plug it back into the steering column ?.
I love this 2 thank you so much for you time
Yes but ohh
It works!!!!!
We did the same process but the car doesn't want to turn the key
Double check your wires. If it still doesnt work, you may have other issues.
Hi bro, what is the color wire to connect...thanks for your help.
The top part or bottom part?
@@robertsautosexplorerweeken5682 the one with the steering column socket..thanks
anyone tested with a bit newer l322 ? where ignition lock is next to steering wheel ? is it same procedure ? having same issue with key not turning, steering wheel is in unlocked position so i guess lock doesnt receive signal from steering column..
I’d love to know as well, I’ve been having this issue with 2007 L322.
Do you recall what gauge wire you used for this?
I think its a 18 gauge
Does it work when the doors are shut
Yes it does so long as the interior light is on it powers the ignition lock
Can anyone tell me where I get the “white line” from?
Any electrical line that supports 12v. Home depot would have it.
One Problem!
First of all, completely fixed being able to turn the key and but now when I completely turn the key it will not start! It worked several times and was yelling for joy…but now nothing? Any ideas?!
I have the same problem!!
I also had the same problem on my 05.....
I end up undoing this and I just ran 2 small guage wires from the 18 fuse location to a small hidden toggle switch that I put between the drivers seat and center console. Instead of having to pull the fuse I just flip the switch off and back on wait about 10-15 seconds and you're good to go
This fix only addresses the steering column and ignition lock issue. If it the lock is disengaged and you can turn the key all the way there is probably something else that id failing on your car. If the ignition is locked, you need to check your wires. You
@@mackshannon6522 hey can u describe how i do this step by step if u don’t mind do i take the fuse #18 out and just run a wire we’re it used to be can u explain for me please nobody can help me
Did you end up fixing it?
Much respect
does this work with a 2008
It should work on the 08
Does this fix work on a 2005 Range Rover hse
Yes it should
@@robertsautosexplorerweeken5682 I watched the video but wasn't clear on connected the wire from the column to the light. Assuming the white wire you have to get from somewhere, home depot?
will this work on the 03?
Yes it should
Great Video Bro!
Thanks man
this worked for me and saved me 1000 bucks! THANX! also need to use same guage wire. My first attempt failed my wire was to big for connector. Oh well works now!
Great. I noticed after the video that there were a few things i didnt clarify. That was one of them.
Hey Chris what gauge did you end up using??
Do you remember the gauge of the wire?
rover Mac.This procedure will not work on 2003-2005 BMW Rover.
Are u completely sure? And why? I have a 04 hse RR. So this will not work on mine?