Anyone who understands what's going on here has the utmost admiration for these workers who are fabricating extremely difficult pieces of machinery using the bare necessities and working in outrageously dangerous environment with no safety gear and open toed shoes, no gloves, no safety shields or glasses and noxious fumes all around in extreme heat~!! You have to see them working this way to believe it. I only hope they don't get hurt or maimed in their efforts. Bless all of them~!!! 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
I worked for 35 years in a mechanical metal industry in Italy and I visited dozens of more or less difficult work situations around the world, but never a working condition like this. My moved admiration goes out to all those seen in the video ... but also the wish to soon achieve better working and living conditions that you surely deserve
You know I’ll keep saying it that you guys are the hardest working Men and Boy I really and truly in awe of from molten metal I was really scared with the melting the metal and then that spinning thing that you poured the molten metal in with the fast spinning making those metal tubes really loving your videos but please stay safe absolutely awesome video best regards from Scotland 🏴 🙏
Amazing craftsmanship from raw materials to finished rollers. These rollers look like they belong in a BUHLER ROLLERMILL to re-grind pasta The RollerMill used 2 parallel rolls rotating into each other and separated by +/- 70 microns. The rollermill had two chambers so it used 4 rollers total. The manufacture of Pasta always had product that was blems, Peel out, trim,etc that could be re-ground and added back to pasta flour by a small percentage. Pasta mfg. runs closed loop through hundreds of different stages. Staged before the rollermill were airlocks, holding tanks, sifters, hammer mill, airlocks, silos, lots of pipe under pressure. But this video shows the creative skills of people in a far away country that was making parts for the machines I maintained R&R.
This is why OSHA exists. The number of people maimed, burned, injured, crushed and / or killed doing these things is staggering. I appreciate the abject poverty that drives this industrialization as it is a reminder of how developed nations have progressed past this over the last hundred years. I also appreciate the tenacity and ingenuity of these workers, despite the horrible working and living conditions they endure.
So why not hop on a plane, go over there and enlighten them. I'm sure they're anxious to learn all about OSHA, and how they can get an OSHA in Pakistan.
It is not an exaggeration if I say that the Pakistanis are the smartest people in the world. It is not a coincidence that they created the atomic bomb and have the strongest intelligence in the world. British colonialism imported industrial machines for them, and they completed the path with their effort and sacrifices. They are strong and patient in the difficult working conditions. My greetings and appreciation to the Pakistani people.
had to log in and leave a thumbs up and a subscribe for these dudes, unbelievable. from trash to treasure. people give America shit for having nice things and working hard to get it, well my friends this is where it comes from this is the type of stuff we did a hundred years ago and learned as we went. now these guys are just starting their adventure.
Good job. Very good video, Best job. .very attractive. Great! , this is the cleanest factory in Pakistan that I have ever seen. But I also hope to soon achieve the better living and working conditions that you certainly deserve Thank. I really like this project. video 💯💯👍 👍
I really like the high precision pipe centre (well it was when the british installed the machine in 1896) used on the lathe, and the way brother belted it with a 800lb hammer! Real precision machining there. Poor buggers!
@@leadboots72But I believe that I heard some where that India has the largest tractor manufacturing plat in the world. Maybe I should google before making the comment but I am too lazy😜
ОДНИМ СЛОВОМ *УГМК* Я 15-ЛЕТ ОТРАБОТАЛ НА УГМК: УРАЛЬСКИЙ ГОРНЫЙ МЕТАЛЛУРГИЧЕСКИЙ КОМБИНАТ. ПОЖИЗНЕННАЯ БОЛЕЗНЬ, А ЭТО КАМНИ В ПОЧКАХ, ЗУБЫ КРОШАТСЯ, ПОЧТИ ВСЕ. ОДНИМ СЛОВОМ, ПИЗДЕЦ.
@@леонидрешетов-о2з Наше время будут называть "золотым веком". Перенаселение, изменение климата на планете, истощение ресурсов - уже недолго осталось ждать. А значит будет "большая всеобщая война" , хаос и смерть...
I said it once and I'll say it again, these dudes have stones the size of boulders, Pouring Metal in sandals, I'm a retired Iron Foundry Worker and have the scars to prove it. That stuff isn't some thing to play around with. OSHA would have a heart attack watching this.
@10:27 Rolling a red hot (likley 1000lb) cylinder of steel and jumping over it while wearing open toe sandals......this made me cringe a little. Quite literally playing with fire, albeit molten metal is even less forgiving.....believe me. Pretty amazing what people can do even in a third world country. But I bet alot of them are walking around with toes missing......
@@skypilotace I can't remember the last time I bought something that was made in India....however the same cannot be said for China! Though I'm certainly guilty of this as well. One thing I'm partial to is my tools. I like to make sure those are almost solely made in the USA. Preferably 100 years ago.
Да литейка и сварщики в сандалиях это нечто. Хотя чему удивляться когда такие же парни в сандалиях с "Калашниковым" 47года и на мопедах прогнали первую армию мира с оборонным бюджетом 800 млрд. $.
Мне казалось последние мазутные печи в середине прошлого века "вымерли"... Конечно жесть. Технологии 30-х годов прошлого века, да и то частично и не полностью. В то время, когда космические корабли бороздят просторы...))))
Russia 🇷🇺 does not produce anything good, even buys drones in Iraq, which has been under sanctions for 40 years. Russian Russian comments, it becomes clear that all Russian "experts" can only comment, but not work!🤣🤣🤣
аллах их проклял родиться в Пакистане и работать в литейке 13 века - какое здоровье??? по плану они там должны страдать и умереть максимально мучительно. ох уж мне эти мракобесы одно говно в башке.
Where is health and safety sandals, no steel capped toe boots? Ventilation god, they hopped a heavy piece of steel of the tailstock trip hazards all over the place. I take my hat off to all that work there, you deserve better working conditions. I started working on CNC Lathes. Over 30 years ago. In the south-west coast of Ireland.☘
Metallurgy is always fascinating. I have seen the whole video. You are doing great. But I am very much worried about the working conditions in your workshop. Workers are not properly clothed and they have no proper shoes. THEY APPEAR USING SANDALS AND PLATIC SHOES IN A MOLTEN METAL ENVIROMENT. They are also not using safety gloves or spectacles etc. You need to make certain changes in this regard. We have no information about the number of accidents you have faced so far .It must be quite a lot. I feel sadness on this point.
Bei flüssigem Metall mit Badelatschen arbeiten ,in Deutschland undenkbar.....trotzdem ein interessantes Video....das die Arbeitsbedingungen dieser Menschen dokumentiert...
doin this kind of work with such old and limited equipment boggles the mind...they work on a dirt floor and looks like its not even a shop..its just outside among a whole mess of things everywhere...unbelievable! i never could have imagined such conditions for the work they do!!! just wow...but also sad to see....they do have heart no doubt about that! i doubt machinists from here in the americas could do so much with so very little!!
These guys are amazing. They build stuff with such primitive gear. Wow !! is all I can say, yet their stuff is just as good as all the gear made with the best mills possible. Clothing is another thing. Loose stuff that could be caught at a moment's notice. Footwear that they wear at home and on the job. I'd be scared to death working there.
Nope. They haven't swept up since the British left in 1947. Haven't maintained the buildings, serviced the machines or sharpened the lathe tools either.
The Bell Hop at a hotel across the street from me told me he gets to retire ten years earlier than regular workers because his job is considered 'hard labor'.
При минимальных затратах ...огромная польза экономии ресурсов и продукт на выходе евростандарта несмотря на то , что цеха не блещеут кафелем ! Связь и опыт веков!🎉
Great skills with the kit that they are working with. What happened to cutting fluid? Everyone these days seems to be cutting dry and destroying tool steel? Not a moan just really curious why so little machining uses coolant these days. Happy to be enlightened (even if I don't agree with it!). Can't see these items being mirror finish but fantastic use of the kit available.
пригласи кого то из нашиx на такую работу Просто послали бы на ююуй и пошли бы буxать.Вот у кого нужно учиться труду и самоотверженности !До пенсии точно не доживут.И опять же государству выгода.Спасибо за самоотверженный труд товарищи!Царствие вам н....
I've never done work like this before, aside from metals class in highschool, but it just seems like you would want to wear boots, gloves, and eye protection, but they seem to know what they're doing.
Hard way to make rollers. 50 years ago we made rollers for saw mill industries, easier and faster, less man labor. About 6 hours per roll to complete machining then send to chrome plating for harden surface to finished.
@@synthers87 Если верить выше написавшим, то делали они валки для помола муки. В отработке есть свинец с подшипников скольжения коленвала. А что им ещё для счастья надо.
Anyone who understands what's going on here has the utmost admiration for these workers who are fabricating extremely difficult pieces of machinery using the bare necessities and working in outrageously dangerous environment with no safety gear and open toed shoes, no gloves, no safety shields or glasses and noxious fumes all around in extreme heat~!! You have to see them working this way to believe it. I only hope they don't get hurt or maimed in their efforts. Bless all of them~!!!
🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
I worked for 35 years in a mechanical metal industry in Italy and I visited dozens of more or less difficult work situations around the world, but never a working condition like this. My moved admiration goes out to all those seen in the video ... but also the wish to soon achieve better working and living conditions that you surely deserve
Well said sir.
Sir this is Pakistan
Is there an OSHA in Italy
And there's no OSHA in Pakistan either by the looks of this video. 😮
ف
You know I’ll keep saying it that you guys are the hardest working Men and Boy I really and truly in awe of from molten metal I was really scared with the melting the metal and then that spinning thing that you poured the molten metal in with the fast spinning making those metal tubes really loving your videos but please stay safe absolutely awesome video best regards from Scotland 🏴 🙏
ilaahay wuxuu yidhi ninkii idalbo wuu iheli ninkii ihelo wuxuu helay wax walbo ninkii iwaayo wuxuu waayay wax walbo,,anigu waxaan leeyahay majirto meel laga heli karo oon islaamka ahayn alxamdu lilaah calaa nicmatu al islaam Alahuma sali calaa sayidinaa muxamad w aalihi wasaxbihi wasalim ❤❤❤❤❤❤❤❤❤
Amazing craftsmanship from raw materials to finished rollers.
These rollers look like they belong in a BUHLER ROLLERMILL to re-grind pasta
The RollerMill used 2 parallel rolls rotating into each other and separated by +/- 70 microns. The rollermill had two chambers so it used 4 rollers total. The manufacture of Pasta always had product that was blems, Peel out, trim,etc that could be re-ground and added back to pasta flour by a small percentage. Pasta mfg. runs closed loop through hundreds of different stages. Staged before the rollermill were airlocks, holding tanks, sifters, hammer mill, airlocks, silos, lots of pipe under pressure. But this video shows the creative skills of people in a far away country that was making parts for the machines I maintained R&R.
Sir Has analyzed it thoroughly
This is why OSHA exists. The number of people maimed, burned, injured, crushed and / or killed doing these things is staggering. I appreciate the abject poverty that drives this industrialization as it is a reminder of how developed nations have progressed past this over the last hundred years. I also appreciate the tenacity and ingenuity of these workers, despite the horrible working and living conditions they endure.
So why not hop on a plane, go over there and enlighten them. I'm sure they're anxious to learn all about OSHA, and how they can get an OSHA in Pakistan.
Blah blah blah.... Loser.
It is not an
exaggeration if I say that the Pakistanis are the smartest people in the world. It is not a coincidence that they created the atomic bomb and have the strongest intelligence in the world. British colonialism imported industrial machines for them, and they completed the path with their effort and sacrifices. They are strong and patient in the difficult working conditions. My greetings and appreciation to the Pakistani people.
RESPECT FOR "THESE"_ WORKING MEN!!! The come everyday early out off them beds to go work in these fabrics.Just so they can feed them family's. ..
had to log in and leave a thumbs up and a subscribe for these dudes, unbelievable. from trash to treasure. people give America shit for having nice things and working hard to get it, well my friends this is where it comes from this is the type of stuff we did a hundred years ago and learned as we went. now these guys are just starting their adventure.
You nailed it on the head.😊❤ From kendall
You nailed it in the head exactly
Agree with you all. Incredible!
These hardworking guys are awesome.
уровень конец 19 начало двадцатоого века. но все это работает и в 21 веке .Уважуха таким специалистам.
8:48 там шматок жидкого металла чуть оператора не обнулил. А чел в тапочках вообще лютый
nố
Тут же бы его и досожгли прямо в тигле. Просто парень не пришел бы домой и всё.
0:54 мин- шлифовально- рифельный станок.Работал когда то на таком.Валки для помола муки на нем обрабатываются.
Thanks 🙏
Уважение этим людям! Жму руку каждому 👍👍
that spinning thing was pretty slick. these boys always impress me with their ingenuity. bless em all
Centrifugal casting. Use it for many processes. Cement & clay are probably among the oldest.
Good job. Very good video, Best job. .very attractive. Great! , this is the cleanest factory in Pakistan that I have ever seen. But I also hope to soon achieve the better living and working conditions that you certainly deserve
Thank. I really like this project. video 💯💯👍 👍
These guys know how to turn scrap metal into pure gold 😃
No entiendo ingles
the hardest working individuals on planet , safety first bros keep it on "uganda"
Tomara que chegue aqui no Brasil logo, trabalho com móveis e tá difícil comprar madeiras
These always amaze me in some way or another.
Thanks 🙏
Outdated and dangerous machinery and technique? Salute these men doing what they have to for a living.
I really like the high precision pipe centre (well it was when the british installed the machine in 1896) used on the lathe, and the way brother belted it with a 800lb hammer! Real precision machining there. Poor buggers!
YOU say poor buggers what you are witnessing is the rise of india and the decline of Europe
This is Pakistan, not India.
@@leadboots72But I believe that I heard some where that India has the largest tractor manufacturing plat in the world. Maybe I should google before making the comment but I am too lazy😜
Молодцы мужики у вас золотые руки от меня лайк
Глядя на это, у меня уже нет никаких сомнений, что такие люди смогли выплавить, тысячи лет назад, и знаменитую железную колонну.
Техники безопасности конечно на высоте!
Не долго рабочие живут. И уж точно никто молоко за вредность не даёт.
Про экологию они не слышали, тем более об углеродной нейтральности...
ОДНИМ СЛОВОМ *УГМК*
Я 15-ЛЕТ ОТРАБОТАЛ НА УГМК: УРАЛЬСКИЙ ГОРНЫЙ МЕТАЛЛУРГИЧЕСКИЙ КОМБИНАТ.
ПОЖИЗНЕННАЯ БОЛЕЗНЬ, А ЭТО КАМНИ В ПОЧКАХ, ЗУБЫ КРОШАТСЯ, ПОЧТИ ВСЕ.
ОДНИМ СЛОВОМ, ПИЗДЕЦ.
В Пакистане около 250 млн чел.живут на площади чуть большей чем Узбекистан. Ежегодный прирост около 5 млн. чел..
@@леонидрешетов-о2з Наше время будут называть "золотым веком". Перенаселение, изменение климата на планете, истощение ресурсов - уже недолго осталось ждать. А значит будет "большая всеобщая война" , хаос и смерть...
Much respect for all you do and your excellent skills, but I grieve for the lack of safety consideration's!
I'm addicted to your videos! 😄
I said it once and I'll say it again, these dudes have stones the size of boulders, Pouring Metal in sandals, I'm a retired Iron Foundry Worker and have the scars to prove it. That stuff isn't some thing to play around with. OSHA would have a heart attack watching this.
@10:27 Rolling a red hot (likley 1000lb) cylinder of steel and jumping over it while wearing open toe sandals......this made me cringe a little. Quite literally playing with fire, albeit molten metal is even less forgiving.....believe me. Pretty amazing what people can do even in a third world country.
But I bet alot of them are walking around with toes missing......
@@skypilotace I can't remember the last time I bought something that was made in India....however the same cannot be said for China! Though I'm certainly guilty of this as well. One thing I'm partial to is my tools. I like to make sure those are almost solely made in the USA. Preferably 100 years ago.
Да литейка и сварщики в сандалиях это нечто.
Хотя чему удивляться когда такие же парни в сандалиях с "Калашниковым" 47года и на мопедах прогнали первую армию мира с оборонным бюджетом 800 млрд. $.
🎉🎉
Joss
Total respect for your talents, please consider maybe using protective gear, mask and gloves? Something like that? Amazing!
Sir what do you do for a living?
I pour molten steel while wearing flip flops and a tee-shirt. 😂😂😂😂😂😂
You are really excellent, such a rough environment can also produce such exquisite products
Мне казалось последние мазутные печи в середине прошлого века "вымерли"... Конечно жесть. Технологии 30-х годов прошлого века, да и то частично и не полностью. В то время, когда космические корабли бороздят просторы...))))
Russia 🇷🇺 does not produce anything good, even buys drones in Iraq, which has been under sanctions for 40 years. Russian Russian comments, it becomes clear that all Russian "experts" can only comment, but not work!🤣🤣🤣
The high level of computerised automation in this factory is absolutely mind-boggling!
They're ready to live in a post-apocalyptic world. Mad Max industrial rebirth.
.
they say automation is for pussy
Дай Аллах этим людям Здоровья !
аллах их проклял родиться в Пакистане и работать в литейке 13 века - какое здоровье??? по плану они там должны страдать и умереть максимально мучительно. ох уж мне эти мракобесы одно говно в башке.
А если они адуисты?
There are so many superstar skills that I need to learn to apply to my construction work
Excellent work keep it up 👍
safest workplace I've ever seen
😊 muito lindo gostei de ver o trabalho em fundição ai o peão é bruto não pode ser sem calos nas mãos parabéns sucesso 😊😊😊😊😊
Where is health and safety sandals, no steel capped toe boots? Ventilation god, they hopped a heavy piece of steel of the tailstock trip hazards all over the place. I take my hat off to all that work there, you deserve better working conditions. I started working on CNC Lathes. Over 30 years ago. In the south-west coast of Ireland.☘
What's you gonna do ?
ขอชื่นชมพวกคุณทุกคน มีทักษะในการทำงานชิ้นใหญ่อย่างยอดเยี่ยม ถึงแม้อุปกรณ์จะล้าสมัยหน่อย แต่นั่นคือ บรรพบุรุษของชิ้นส่วนเครื่องจักรที่ทนทานอย่างดีที่สุด และพวกคุณก็ทำมันได้อย่างง่ายดาย ในขณะที่พวกเรายังนั่งคิดอยู่ว่า มึงทำกันยังไง.ขออัลลอฮฺ(ซ.บ.)จงคุ้มครองพวกคุณทุกคนให้มีสุขภาพที่ดี โชคดี และปลอดภัยในการทำงานน่ะเพื่อน เซฟตี้บ้างก็ดีน่ะ /ทักทายด้วยรัก จากประเทศไทย วัซสลาม
8:27 This is Soooooo Freaken Amazing What Absolute Legends!!!!!
These machines are over 100 years old. Incredible. But please be more safe!
все по какнонам техники безопастности )) особенно в тапках на литейке )
The way they are using the lathe in ways they weren't designed to shows some serious ingenuity.
Какой изнурительный труд, надолго ли хватит здоровья этим бедным не глупым рабочим?
Metallurgy is always fascinating. I have seen the whole video. You are doing great. But I am very much worried about the working conditions in your workshop. Workers are not properly clothed and they have no proper shoes. THEY APPEAR USING SANDALS AND PLATIC SHOES IN A MOLTEN METAL ENVIROMENT. They are also not using safety gloves or spectacles etc. You need to make certain changes in this regard. We have no information about the number of accidents you have faced so far .It must be quite a lot. I feel sadness on this point.
😅
Estan fabricando cilindros para molinos, increíble la precariedad con la que laburan! Saludos desde Argentina!
Bei flüssigem Metall mit Badelatschen arbeiten ,in Deutschland undenkbar.....trotzdem ein interessantes Video....das die Arbeitsbedingungen dieser Menschen dokumentiert...
This is the first time I have seen centrifugal casting in operation. I feel for the workers especially the lack of safety wear.
Amazing in the recycling endeavors.
These people are artists, beautiful!
8:49
the English health and safety board would be having kittens at this
Странно было увидеть микрометрическую скобу в таком антураже....
Пару раз проскакивает на десятки видео о обработке металла у них. И всё равно одну сторону вал забил, а в другую вложил.
Эпоха позднего средневековья, первая промышленная революция.
doin this kind of work with such old and limited equipment boggles the mind...they work on a dirt floor and looks like its not even a shop..its just outside among a whole mess of things everywhere...unbelievable! i never could have imagined such conditions for the work they do!!! just wow...but also sad to see....they do have heart no doubt about that! i doubt machinists from here in the americas could do so much with so very little!!
When the technical and science wins the rudimentarys machines.
Wao cuantos riesgos de vida, todo lo que tiene que hacer el hombre honrrado para ganarse la vida, un saludo desde la REPUBLICA DOMINICANA.
Ох уж, эти дендрофикальные технологии)) Какая марка стали, кто-нибудь знает?))
там же все по весам, 32 части крышек, 16 частей обойм и 4 камня
with this technology these people are artists
Holy Moly, AMAZING!!!
These guys are amazing. They build stuff with such primitive gear. Wow !! is all I can say, yet their stuff is just as good as all
the gear made with the best mills possible. Clothing is another thing. Loose stuff that could be caught at a moment's notice. Footwear that they wear at home and on the job. I'd be scared to death working there.
The chain blocks appear to be working over there limit I would expect one of them to drop the load sometime.
везде металическая стружка на полу,а ходят в тапочках на голую ногу,афигеть
Excelente video
Sorprendido lo mejor 👍👍👍👍🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱
Uma equipe de profissionais digna de respeito e consideração, que nosso pai todo poderoso os protejam sempre.
All consideration to these very hard working people!
do you ever clean up when finished milling.
Nope. They haven't swept up since the British left in 1947. Haven't maintained the buildings, serviced the machines or sharpened the lathe tools either.
Incredible stuff! but remember to ALWAYS wear the requisite H&S mandatory flip flops when you're pouring molten iron.
Don't forget to breath all those delicious fumes either.
Yeah. I was wondering if those was steel toe safety flip flops and high tech safety glasses too. Don't forget to loose shirt sleeves shirts too.
The Bell Hop at a hotel across the street from me told me he gets to retire ten years earlier than regular workers because his job is considered 'hard labor'.
При минимальных затратах ...огромная польза экономии ресурсов и продукт на выходе евростандарта несмотря на то , что цеха не блещеут кафелем ! Связь и опыт веков!🎉
какая экономия? с такими расходами материалов и электричества любой европейский завод по миру пойдет
Im brazilian very good very good
высочайший технологический процесс по производству пористого титана - благодаря этим ребятам Индия уже осваивает Луну
Very good,excellent performance and congratulations dear brothers.
вот вам и цыгане Индии. когда жизнь заставляет они могут и работать.
Great skills with the kit that they are working with. What happened to cutting fluid? Everyone these days seems to be cutting dry and destroying tool steel? Not a moan just really curious why so little machining uses coolant these days. Happy to be enlightened (even if I don't agree with it!). Can't see these items being mirror finish but fantastic use of the kit available.
I listened to this with speakers on a pretty low volume and my ears are ringing. Imagine working there for days!
sublime!. todo desde el inicio.
Вальчевые валы наверное повезли на Сызранский мелльничный комбинат.
Натяжитель ремня супер
пригласи кого то из нашиx на такую работу Просто послали бы на ююуй и пошли бы буxать.Вот у кого нужно учиться труду и самоотверженности !До пенсии точно не доживут.И опять же государству выгода.Спасибо за самоотверженный труд товарищи!Царствие вам н....
gotta love them safety flip flops
Крутые ребята!!!!
At 08:50 the cameraman and the boy were hit by some hot drops... 😬🔥
I've never done work like this before, aside from metals class in highschool, but it just seems like you would want to wear boots, gloves, and eye protection, but they seem to know what they're doing.
You'd only need to step on a red hot piece of steel once, to learn.
Top demais parabéns 👏👏👏👏👏
Terima kasih perkongsian video nya 👍👍
Me resulta muy interesante
Vocês são muito bons no que fazem. Meu respeito e admiração pelo que fazem.
Hard way to make rollers. 50 years ago we made rollers for saw mill industries, easier and faster, less man labor. About 6 hours per roll to complete machining then send to chrome plating for harden surface to finished.
50 years ago was in 70ies.70ies in industrial nations is far far further than this method from steam engine age! Absolute not to compare.
8:52 that was like volcanoes magma splashing all over him and guys around but it was like ball splashing water all over him
I love this gays
I see that all of the workers have on their flame proof, loose fitting cotton safety garments, and their safety sandals with the necessary open toes.
Allow Roll for Flour Mill Machines
Are the cylinders cast steel or cast iron?
That centrifugal casting is amazing and the oil burning furnaces! But dangerous!
19:40 That guys' eyecrometer is finely tuned!
Мастерство не пропьёшь
как называется такая конструкция печи и на каком топливе она работает ?
Ротационная печь вроде. На отработанном машинном масле работает.
@@synthers87 Если верить выше написавшим, то делали они валки для помола муки. В отработке есть свинец с подшипников скольжения коленвала. А что им ещё для счастья надо.
Рабочий человек не зря свой хлеб кушает!
Re-Upload?
OUR BEST REGARDS FROM BRAZIL
Interesting 🙂