So I bought new tires for my 2000 WJ and my mechanic pointed out everything that my jeep needed to pass Pa State Inspection. I didn't just replace the parts, I UP-GRADED. Iron Rock Off road Premium 4" lift front and back, all aluminum radiator, New hoses, every single brake line, trans lines, Gas lines, Filters, Gas Tank Skid Plate by AOR, Doug Thorley headers, spring isolators, engine mounts, head lights, hood and rear hatch struts, oil pan and more. All just so I wouldn't have to waste new tires. So I totally understand. LOVED JEEPS NEVER DIE.
This was thoroughly enjoyable! I stopped watching for instructions to do this myself, as I have concluded I'm not doing all that work on a 20+ yr old car DIY. I did continue to watch from then on just purely for entertainment purposes. Much love for your future endeavors!
13:30 Oh yes, good ol’ Eric. I remember him fondly. We served in Nam together. Eric could clear a foxhole like nobody else I’ve seen. What a true American hero, that Eric.
“You know where that’s going ? That’s going no where . “ “More betterer” got me 😂 Just bought a WJ and this is exactly what I need to do Thanks for the vids man !
It doesn't happen often but I love getting new stuff for my Jeep! I mostly love it when as soon as a new part touches my Jeep, no matter how much it cost, it loses all its value instantly! I hope your Jeep drives smooth and straight and if not just turn the stereo up louder👌
having done ball joints, track bars, control arms, and tie rods in both my XJ and my ZJ, plus front and rear shocks and springs in the XJ all over the last year, I do NOT envy a guy trying to go at this without an impact, ball joint press, and puller set. I can't imagine doing this job without them!
Doug taking his throne on the parts pile 🤣 Hail Douglas, king of the Jeep!!! Gotta send back your new parts for some rustier stuff 😆😆. I popped new isolators on black beauty
Similarly, i just gave the XJ new brakes, tie rod ends, drag link, control arms, sway bar bushings, and a front end alignment in preparation for brand new BFGs. Incredible transformation in the steering and ride quality. I hope the WJ reacted the same after all these parts went on.
Yea? I would like to see that clean thing with some fresh rubber on it! We gotta come down and see your new place sometime as well. The WJ is like a new Jeep. Should have done this years ago..
I haven't bought brand new tires in 20 years until this year when I got my 98 ZJ. 31' BF Goodrich AT K02's $702 mounted, balanced out the door. Keep up these great videos for sure and more Barney the ZJ vids please! Have great Christmas y'all!!
Nice work. I've had the tie rod ends replaced on my WJ, new shocks, pads and calipers ( always keep an eye out for seizing calipers ), muffler, upper and lower ball joints on the front end, both hub assemblies on the front, water pump, serpentine belt, radiator, and a partridge in a pear tree all in the last year. Gotta love the WJ's! Lol. BUT...... I still need to replace those darn spring isolators and control arms as well before moving to the rear of the Jeep for more work. I have a 1999 Jeep Grand Cherokee WJ Laredo with the 4.0 inline Six. 138,000 miles. She should run for many, many more years to come.
Just had the death wobble start the other day. Had my wife turn the wheel while I was under there and found the track bar bushings worn out. Replaced that, no more wobble when hitting potholes.
I just did most of what you did. Alot of my parts were toast. I was getting a lot of death wobble. After replacing my ball joints it cured about 90% of the wobble at around 53-57mph. I still have a slight wobble, same speed. Last task are driver side upper-lower ball joints and track bar. I didn't realize how bad these parts were until I did a 3 inch budget boost. After putting the budget boost in it's stressed out a lot of the parts.
Dude I love this your approach 😂. Love this channel. I've got 1999 wj 4.7 with 234 k miles. Who says these engines are no good.Of coarse it needs everything your doing.
I hear ya, wanted to get both front & rear done before winter, LOL THAT DID'NT HAPPEN. Put about a $1300 hundred into it including tires on my stock ZJ. Still have parts sitting here waiting to be put on but it probably won't happen till spring ? Also spent about a grand in tools to make my Jeep fixing easier.
Dude you are a WJ god 🙌 I just spent the last 3 nights thinking of a plan to replace worn out parts but was clueless till now. Thank you sir again, now I have a game plan!!! Que bien que te gusten las empanadas hermano!!!
Oh shit! Finally a wj guy thats thorough, quick, and to the point….and funny to listen to. Quick wits always help. Do you have a place to ask you a question about mine (2000 WJ Laredo) thats not here on you tube? Do you message anywhere? It’s an engine noise, oil leak question. And a quick one about lifts and drive trains and heavy bumpers. Please. I would appreciate it.
Really like this series my guy. I'm from NJ and work on my 4.0L '04 WJ constantly. I've done my steering stabilizer, shocks, and sway bar end links so far. Next up is front upper & lower control arms and my track bar. Just wish it wasnt my daily driver or I'd do it all at once like you! Lol
had you just made this vid 6 months ago id would been freaking awesome to know how to fix this and that, but its always good to watch you guys on yt !!
For anyone wondering about tires, I bought a set of 32” Milestar Patagonia M/T’s for my 04 WJ about a month ago and absolutely love them. Great road manners, awesome off road and they were only $650 brand new. Highly recommend them.
Good thing to do while you got it all apart anyhow, cause you know how things go, a few days or weeks after tearing apart the whole front end and rebuilding it, that CV axle and/or hub is going to go oh hell no you ignored me I'm gonna break now LOL.
Damn that WJ should ride like a new one now.That is one cute little sister you got there Douglas.I am amazed that you two are even related...lol....Just kidding buddy..
You really lucked out on the axle side bolt for that track bar. Those bastards rust out in the bolt snaps. Dana thought it was a good idea to weld a nut in an Inaccessible area so when you go to take the bolt out, it snaps. Sweet.
I got 3/4 of my sway bar end links done last week on my 04 WJ in about an hour and the frame side bolt on the last one (rear passenger) snapped half way thru taking it out. Took my another 2 hours to drill it out. I didn't even take the welded nut off I just bought a longer bolt and passed it thru the drill hole lol
Right now I'm in "replace everything" hell. I just bought a 2010 jku with 214k miles. Just rebuilt the trans, and I thought "well while the transmission is off... May aswell fix up this leaky 3.8" And I've replaced literally every seal on the engine besides the head gasket. Cam plugs, front crank seal, rear main, both pan gaskets, valve covers, intake etc. Then water pump. Then I did fuel pressure regulator while the intake was off, then I said, "I should probably service the diffs while I'm at it" and I almost regret pulling the diff covers off. The rear d44 spider gears and pinion are shot and the clutches are shot so that's another 500 down the drain for a new carrier, bearings and axle seals. This turned from 600 for a rebuild kit on the trans to well over a thousand dollars in bullshit. At this point I think I might just roll it down a hill into a tree and call it a day.
I bought the 2004 WJ Columbia edition I have loved every minute great buy runs great its the 4.0 4x4 I bought it for camping a bit of off roading I live in AZ i dont want to go rock crawling but i want to do a bit of offroading what do you suggest i do? Should I do a lift or leave it stock, what parts should i replace just to get it a little more offroad capable beef it up a bit. Dont want to spend a second mortgage on it but I do have a couple grand to throw down. Thanks for the help and keep up the great videos.
That is basically my dream WJ! Glad to hear you are enjoying it. I might advise you leave it stock unless you really need the lift for your application
Sacrifice a large socket grind a slot in the side then only unhook one side slide modified socket over the tie rod end makes it way easier especially if ya have an impact
I ha e wayched a ton of your videos bc i own a 2003 JGC WJ. I like your commentary plus you are very informative. But i do have a question. What do you recommend for a 2" to 3" lift?
Why I hate working on my vehicles... But i don't Trust anyone else to do it the right way... All shop employees always want the fast easy way... One thing ALWAYS leads to more... I see you like the German tightening spec also, "Good En tight"...
Shout out to ur speed improvements!!good job,hey would like to put same 2inch reciever bar on my 2002 wj as yours in front what hitch did you use.great place for adding a winch just when needed.please send info.my steel bumper is too heavy needs to come off and plastic going back on but want that setup for winch just in case.really like ur stuff.snookie pa.2019
Old Man Emu makes a 1.5" HD suspension kit for the WJ that I want SO bad. new springs and stiffer sway bars. Unfortunately i cannot justify the $1200 price tag. haha
@@DEInTheGarage so far I have tie rod ends, and the two tie rod adjusting sleeves and the control arms. What other parts would you recommend to get ? Also I'm trying to decide on a 2-4 inch lift if you have any advice on which one to choose
D&E In The Garage Thanks for the input Doug. I appreciate everything. Maybe in the future you could replace you valve cover gasket I’d like to do mine but I’m a bit nervous about it.
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
So I bought new tires for my 2000 WJ and my mechanic pointed out everything that my jeep needed to pass Pa State Inspection. I didn't just replace the parts, I UP-GRADED. Iron Rock Off road Premium 4" lift front and back, all aluminum radiator, New hoses, every single brake line, trans lines, Gas lines, Filters, Gas Tank Skid Plate by AOR, Doug Thorley headers, spring isolators, engine mounts, head lights, hood and rear hatch struts, oil pan and more. All just so I wouldn't have to waste new tires. So I totally understand. LOVED JEEPS NEVER DIE.
This was thoroughly enjoyable! I stopped watching for instructions to do this myself, as I have concluded I'm not doing all that work on a 20+ yr old car DIY. I did continue to watch from then on just purely for entertainment purposes. Much love for your future endeavors!
Hit a guy with a like right off the bat. “Couldn’t hear the lifter tick over the squeak” 😂
A feller appreciate that
I just found this channel and subscribed after that comment🤣
13:30 Oh yes, good ol’ Eric. I remember him fondly. We served in Nam together. Eric could clear a foxhole like nobody else I’ve seen. What a true American hero, that Eric.
“You know where that’s going ? That’s going no where . “
“More betterer” got me 😂
Just bought a WJ and this is exactly what I need to do
Thanks for the vids man !
This ole boy is inspiring me to get off my A** to tackle my '04 Laredo needs
Do it! Show the WJ some love!
New subscriber right here love to see people that take care of their vehicles considering nowadays no one does they ride the car until it blows up
a family that wrenches together, stays together.
Amen!
Nice work.
This guy has the most subtle yet amazing sense of humor 😂😂
It doesn't happen often but I love getting new stuff for my Jeep! I mostly love it when as soon as a new part touches my Jeep, no matter how much it cost, it loses all its value instantly! I hope your Jeep drives smooth and straight and if not just turn the stereo up louder👌
LOL... Same, buddy. My Jeep is a magical contraption that turns hard earned cash into rust and frustration...
having done ball joints, track bars, control arms, and tie rods in both my XJ and my ZJ, plus front and rear shocks and springs in the XJ all over the last year, I do NOT envy a guy trying to go at this without an impact, ball joint press, and puller set. I can't imagine doing this job without them!
Yeah .. sounds painful
I am a first timer .... loved your show and I learned something . Gave a thumbs up and subscribed
My man!!! I think you just solved the mystery noise coming from my WJ...a creaking sound like an old mattress...the spring isolators
Love that your beautiful sister stopped in to help turn some wrenches ! I'm jelly I wouldn't mind her stopping by my garage if she likes Colorado ?
Doug taking his throne on the parts pile 🤣 Hail Douglas, king of the Jeep!!! Gotta send back your new parts for some rustier stuff 😆😆. I popped new isolators on black beauty
Haha, yea buddy. They make a HUGE difference
Similarly, i just gave the XJ new brakes, tie rod ends, drag link, control arms, sway bar bushings, and a front end alignment in preparation for brand new BFGs. Incredible transformation in the steering and ride quality. I hope the WJ reacted the same after all these parts went on.
Yea? I would like to see that clean thing with some fresh rubber on it! We gotta come down and see your new place sometime as well. The WJ is like a new Jeep. Should have done this years ago..
I haven't bought brand new tires in 20 years until this year when I got my 98 ZJ. 31' BF Goodrich AT K02's $702 mounted, balanced out the door. Keep up these great videos for sure and more Barney the ZJ vids please! Have great Christmas y'all!!
Those are some damn nice tires! And a damn nice price for them!
Them bf goodrich ko2 are good on and off road
@@brucewhite7069 those tires aren't great at anything but good on everything thats the beaty of them......
Nice work. I've had the tie rod ends replaced on my WJ, new shocks, pads and calipers ( always keep an eye out for seizing calipers ), muffler, upper and lower ball joints on the front end, both hub assemblies on the front, water pump, serpentine belt, radiator, and a partridge in a pear tree all in the last year. Gotta love the WJ's! Lol. BUT...... I still need to replace those darn spring isolators and control arms as well before moving to the rear of the Jeep for more work. I have a 1999 Jeep Grand Cherokee WJ Laredo with the 4.0 inline Six. 138,000 miles. She should run for many, many more years to come.
Just had the death wobble start the other day. Had my wife turn the wheel while I was under there and found the track bar bushings worn out. Replaced that, no more wobble when hitting potholes.
9time out of 10 that is the case. Glad it worked well for you!
I just did most of what you did. Alot of my parts were toast. I was getting a lot of death wobble. After replacing my ball joints it cured about 90% of the wobble at around 53-57mph. I still have a slight wobble, same speed. Last task are driver side upper-lower ball joints and track bar. I didn't realize how bad these parts were until I did a 3 inch budget boost. After putting the budget boost in it's stressed out a lot of the parts.
Dude I love this your approach 😂. Love this channel. I've got 1999 wj 4.7 with 234 k miles. Who says these engines are no good.Of coarse it needs everything your doing.
My new favorite channel. You got me through my first tie rod end/s replacement!! Thanks. Track bar next. Swaybar links after that. Rock on!
I gotta rebuild my whole front this spring rears all been done that was fun
I hear ya, wanted to get both front & rear done before winter, LOL THAT DID'NT HAPPEN. Put about a $1300 hundred into it including tires on my stock ZJ. Still have parts sitting here waiting to be put on but it probably won't happen till spring ? Also spent about a grand in tools to make my Jeep fixing easier.
"I could barely hear my lifter tick over the squeak in the suspension bushings."
🤘🤣🤘
Dude you are a WJ god 🙌 I just spent the last 3 nights thinking of a plan to replace worn out parts but was clueless till now. Thank you sir again, now I have a game plan!!! Que bien que te gusten las empanadas hermano!!!
I’ve used the gold colored staples, that come in heavy card board parts boxes, for cotter keys and they work surprisingly well 😂
That is a hell of a heck! Gonna have to try that one!
@@DEInTheGarage use at your own risk! They seem strong to me but will see if they take the rust belt!
Loving the videos. I’ve literally watched almost every single one.
Haha.. dang! Well thanks for the views!
I replaced the suspension on my WJ a few years ago by myself. The control arms were tough, but its lookin good now!
Oh shit! Finally a wj guy thats thorough, quick, and to the point….and funny to listen to. Quick wits always help. Do you have a place to ask you a question about mine (2000 WJ Laredo) thats not here on you tube? Do you message anywhere? It’s an engine noise, oil leak question. And a quick one about lifts and drive trains and heavy bumpers. Please. I would appreciate it.
great video. btw i see who got the looks in the family.
Really like this series my guy. I'm from NJ and work on my 4.0L '04 WJ constantly. I've done my steering stabilizer, shocks, and sway bar end links so far. Next up is front upper & lower control arms and my track bar. Just wish it wasnt my daily driver or I'd do it all at once like you! Lol
Yea, I had to save for a bit and set a lot of time aside to do it all at once. Good lcuk with yours!
Couldn't hear my lifter tick! LOL! OMG your attitude is awesome! I'm dying!
Gotta have a good sense of humor if you are going to get into 20 year old Jeeps!
i think i learned after watching neough of these videos is to buy the center bar of the tie rods in addition to the end replacements
had you just made this vid 6 months ago id would been freaking awesome to know how to fix this and that, but its always good to watch you guys on yt !!
For anyone wondering about tires, I bought a set of 32” Milestar Patagonia M/T’s for my 04 WJ about a month ago and absolutely love them. Great road manners, awesome off road and they were only $650 brand new. Highly recommend them.
hmm now time to get the motivation to do that stuff to my Jeep, I hate wintertime when you got to work on your Jeep.
It makes for tough sledding if you dont have someplace warm and dry
“Could barely hear my lifter tick over the squeaky bushings” lol
You did put that nail in place of the carter pin. I just watched the video the other day.
Wait, really?? When? I don't remember ever having the tie rod ends off on this jeep
That's how all good stories start " this one time i ... "
Right??
I need to do all of this. Well done
The D&E Team...awesome!!! Keep on jeep'n! Great video and camera work. Just like being there to help, watch, kibitz etc.
Aw bro..kibitz....my dad used to say that all the time😢
I usually do CV axles and hubs as a general front end refresh
Good thing to do while you got it all apart anyhow, cause you know how things go, a few days or weeks after tearing apart the whole front end and rebuilding it, that CV axle and/or hub is going to go oh hell no you ignored me I'm gonna break now LOL.
Yep. I should have added that. I did mine about 3 months ago, but worth mentioning for everyone else
Damn that WJ should ride like a new one now.That is one cute little sister you got there Douglas.I am amazed that you two are even related...lol....Just kidding buddy..
LOL... Oh you, Dan!
nice jeep, awesome watching you work, and fix things yourself with some help from friends. any updates on the avalanche.
The Avy has been sitting. I am collecting parts to fix the fuel system. It might be a few weeks before I get back to it, to be honest
Thank you for this! Exactly what I needed, just got new tires and was getting ready to start a front end redo
ive just started learning about working on my own jeep and the hardest part for me so far is working on my back lol
You really lucked out on the axle side bolt for that track bar. Those bastards rust out in the bolt snaps. Dana thought it was a good idea to weld a nut in an Inaccessible area so when you go to take the bolt out, it snaps. Sweet.
I got 3/4 of my sway bar end links done last week on my 04 WJ in about an hour and the frame side bolt on the last one (rear passenger) snapped half way thru taking it out. Took my another 2 hours to drill it out. I didn't even take the welded nut off I just bought a longer bolt and passed it thru the drill hole lol
Right??? Who in the world signed off on that??
You got a new subscriber! Funny as hell yet informative!
Thanks bud. Happy to have you here
2 months ago . Replaced the entire front end on my buddies 98 Cherokee for right at 300$
His had death wobble BADDD. Not any more
Nailed it!
When i bought my 01 there was a nail on the spindle nut lol. But the cv shaft behind the nail was brand new so i said I’ll take it
Bet that thing rides so smooth now. All them RUclips subscribers now you are buying all new parts. Haha great video keep it up!
It really does! haha
Thanks for showing how to push the bump stop out of the way to get the track bar bolt out.
those old sway bars look nice lol
Yo I’m trying to rebuild my ‘03 WJ front end and I could use your help. I’m in CT but I’m from NJ and could come to you. I’d be dope to meet you
Email me bud. dandeoffroad@gmail.com. I am sure we can work something out
Nice work that loomed pretty easy unfortunately it won't be that easy on my GMC.
No, probably not as easy or inexpensive on the 2500. Made all the difference in the world though
Anyway that you remember the number for the upper control arm bushing that installs on the front axle upper side
Yup, Only time I buy brand new tires is when the front end is all in ship shape and rides straight.
More videos with Jenny!!
no wow brand new parts and tires good thing i am sitting down lol
Right?? Must have lost my mind!
Dope sense of humor!
We aim to educate and amuse
Right now I'm in "replace everything" hell. I just bought a 2010 jku with 214k miles. Just rebuilt the trans, and I thought "well while the transmission is off... May aswell fix up this leaky 3.8" And I've replaced literally every seal on the engine besides the head gasket. Cam plugs, front crank seal, rear main, both pan gaskets, valve covers, intake etc. Then water pump. Then I did fuel pressure regulator while the intake was off, then I said, "I should probably service the diffs while I'm at it" and I almost regret pulling the diff covers off. The rear d44 spider gears and pinion are shot and the clutches are shot so that's another 500 down the drain for a new carrier, bearings and axle seals. This turned from 600 for a rebuild kit on the trans to well over a thousand dollars in bullshit. At this point I think I might just roll it down a hill into a tree and call it a day.
Woof... I have been there bud. Some days the get the bear, and somedays the bear gets you. Hope your luck turns around!
Exactly what I was looking for but how on earth did you get the castle nut off at the pitman link I can't get to it at all
This man legit woke up one day and said, I'm gonna rebuild the front of my jeep.
how hard is it to get the springs out without removing everything else you removed?
You got a good video of how to remove the upper control arm bushing that’s pressed in the front axle of a XJ
Not yet, but we will make one at some point
Could you put the 2.5 inch spacers in when putting the springs back in without a spring compressor?
Is there a parts list of what all you put on? I'm looking at wanting to do like you have done which is redo my front end suspension.
Thanks for the video it saved me so much money and time very helpful!
You crak Me up
Awesome.......love your sense of Humor
My 2001 has 240k miles. Figure it's about time to do this exactly, plus maybe wheel bearings.
I bought the 2004 WJ Columbia edition I have loved every minute great buy runs great its the 4.0 4x4 I bought it for camping a bit of off roading I live in AZ i dont want to go rock crawling but i want to do a bit of offroading what do you suggest i do? Should I do a lift or leave it stock, what parts should i replace just to get it a little more offroad capable beef it up a bit. Dont want to spend a second mortgage on it but I do have a couple grand to throw down. Thanks for the help and keep up the great videos.
That is basically my dream WJ! Glad to hear you are enjoying it. I might advise you leave it stock unless you really need the lift for your application
I had to do the same thing to my tierod ends ,what a pain , 2001 limited wj 4.7 L same as yours but mines black .
Sacrifice a large socket grind a slot in the side then only unhook one side slide modified socket over the tie rod end makes it way easier especially if ya have an impact
I ha e wayched a ton of your videos bc i own a 2003 JGC WJ. I like your commentary plus you are very informative. But i do have a question. What do you recommend for a 2" to 3" lift?
I just got a 2002 wj looking to replace front lower control arms among other things. How good is moog vs mevotch compared to autozone or oreillys.
Why I hate working on my vehicles... But i don't Trust anyone else to do it the right way... All shop employees always want the fast easy way...
One thing ALWAYS leads to more...
I see you like the German tightening spec also, "Good En tight"...
Love the wj videos
Nice not always having to rely on those wj facebook groups
We started this channel to serve the criminally undeserved WJ market
Could i get the part numbers that you used?. I have a 2003 jeep Grand cherokee overland 4.7HO VIN J.
Did you get after market or oem factory brands
Am I on the right show or is there something wrong with my audio did you say new tires?
I know, right?!
Im just wondering do they have erics at Walmart, i need one this week for a wj i started lol
Hey Doug what brand of ball joint and tie rod end did you went on the WJ ?
I went with Mevotech. A little cheaper than Moog, but similar quality in my experience
I like listening. This is a great vid
Love the beard my man.
Thanks bud
My WJ has a hard time turning to the right sometimes. Lefts are fine.. Any ideas?
Hey, would you happen to have the list of the parts you used for this project? I plan on doing the same thing to my wj this summer.
Shout out to ur speed improvements!!good job,hey would like to put same 2inch reciever bar on my 2002 wj as yours in front what hitch did you use.great place for adding a winch just when needed.please send info.my steel bumper is too heavy needs to come off and plastic going back on but want that setup for winch just in case.really like ur stuff.snookie pa.2019
That front hitch is actually custom. We have a video on making it. wasnt too hard. ruclips.net/video/5uf4pCuxmNc/видео.html
use silecon greese on the polly bushings, no squeak.
I love your work, but you must have been tempted to pop a taller spring in there... Grab an inch of a lift for doing all that work!!!
Old Man Emu makes a 1.5" HD suspension kit for the WJ that I want SO bad. new springs and stiffer sway bars. Unfortunately i cannot justify the $1200 price tag. haha
@@DEInTheGarage oh man! That would be perfect... C'mon Add revenue!!!
Gonna need the Empanadas recipe
Hey man, I'm trying to redo my steering components and later the suspension. Thinking about doing a lift too.
Awesome! It will drive like a new vehicle after this new steering components
@@DEInTheGarage so far I have tie rod ends, and the two tie rod adjusting sleeves and the control arms. What other parts would you recommend to get ? Also I'm trying to decide on a 2-4 inch lift if you have any advice on which one to choose
hey boss any chance you have a list of all those parts you replaced on the WJ?
Are you looking for part numbers or just a list of the parts? Email me dandeoffroad@gmail.com
Any suggestions for a Tuppy Cylinder head to replace the stock head on my 2001 WJ?
Is it better to buy a refurbished 2004 engine or rebuild my 2001 ?
Were you picky on the suspension parts or did you just buy the cheap ones?
Rockauto.com. Got the cheapest name brand stuff. not bottom of the barrel, but middle of the road
D&E In The Garage Thanks for the input Doug. I appreciate everything. Maybe in the future you could replace you valve cover gasket I’d like to do mine but I’m a bit nervous about it.
Do I need an alignment after coil spring isolators are replaced?
You shouldn't, no.
What? New parts?. Lol. Great video!
Don;t tell Uncle Jerry!
@@DEInTheGarage lol
Put one of those cowbells in both hands and shake... makes a dull clatter sound... just like all 4 of my ball joints I just took off my 04 WJ. 😆
I went with some nice BFG tires from Walmart less then 100 a piece and have been goood tires even in the snow and ice on my wj
No kidding... that is a pretty good price
I call bullshit on that cotter pin nail not being you. Your CV Axle Replacement vid is my witness. lmao
Things to replace on a Patriot: The Patriot!