Some great news everybody, the ROKR Marble Spaceport and Night City Link-Up is finally out on Pre-Sale: shareasale.com/r.cfm?b=2573239&u=4069976&m=106192&urllink=&afftrack= I’m rubbing my hand as I can’t wait for it. And make sure you grab yours from the affiliate link above and thank you all and enjoy 😊
This is such an exciting build and I hope you all enjoyed the first part and please leave a like, Subscribe and ring the bell so you don't miss part 2 of this Marble Night City assembly 😊
Huntsville, Alabama, USA, here. First time assembling a marble run of any sort, so I'm greatly appreciating your step-by-step instructions as I work on this. Coffee beside me, time to start!
An ex-pat, now living in West Kelowna, B.C. Canada. Just purchased all 3, which arrived today. Thankful for your videos and attention to detail. I can see it's going to be invaluable.
My nephew & I are doing this together for the 1st time and we had so much fun thanks to your videos!! Whenever we got stuck we’d go to the area of the video where we needed to progress. Your video was a blessing & tamped down on the frustration & you move at just the right speed. Thanks from Janine in Concord NC.
Hey Janine, Aaww I’m so delighted for that, so glad I was able to help and I’m glad you both were having fun assembling it 😊 All the way from NC that’s amazing 🤩 Have you guys got your next project on the list?
I just started the ROKR Marble Night City build. I am using your build videos and the instruction manual in combination. Your videos are fantastic, and so easy to follow. Thank you very much for posting them up for us. Rob
I am in Cranberry Township, PA, USA. I havent started building mine yet, but I already bought the Spaceport and Link-Up, so I will have those to build later on :) Thank you very much for this video, and especially the warning at the beginning to 'sand everything'....I sorta figured that I would have to do that.
Hey James, oh from a different part of the USA, that’s excellent 😃 And that’s brilliant, you’re gonna love both of the kits, apart from the motor once it’s connected to both of the runs, but just on spaceport it’s pretty perfect 👌 And you’re more than welcome, I’m just glad I can help out 😊
M8 sometimes the book instructions can be a bit hard to figure out and sometimes that's good for me I can always come back to your wonderful video for the perfect finish 👍
I got marble city and the link up this pass Friday and I immediately started....I had a similar situation with Run D, a small piece broke and I had to use the spare part.. Thank you for the tutorial on the proper way for Run D, I was worried that I was going to break it again. I'm not completely finished, but this helped me moved more forward. Cheers, Jason
My mom and I started this today. We love your videos and we enjoy your company. We are sending love from Kentucky! With your help we are determined to finish this! ❤
Yeah that knife can be handy from the looks of things, I haven’t really had the need for one, but it could have been useful a few times. And that’s great, whatever helps you and makes it easier to assemble the models is great 👌
In Maryland out side of DC. I've done a bunch of these wooden puzzles and love them. I love how you and other do these builds so I can watch when I'm having issues putting them together.
Hey, aahh that’s awesome, there’s lots of folk here from the USA, amazing 😃 That’s excellent and yeah these kits are brilliant and I hope I was able to help out in any way 😊
Martin, I finally finished the Spaceport successfully and am now working on Night City. That “d” run was a real bugger for me. I broke those little railings 4 times! And kinda made a mess of trying to glue some of the parts back together. I was so glad you showed there was a backup A3 piece in your video. So I started over, and broke the damn rail AGAIN! This time, I hope, the glue will work better.
Hey, that’s amazing, well done 👌 Even if you broke pieces it’s okay as long as the marble run does its job you’re good, so well done again 😊 Have you got any other models planned to do next?
Hey Elliott, that’s excellent and you’ll enjoy it once you receive it, there are some challenging bits but you just have to take your time and be careful 😊
Hey Anne, aww that’s just amazing, what a beautiful country it is. I’ve been to Amsterdam with my wife quite a few times and we can’t seem to stop going there for long weekends 😅
Hey Brian, that’s brilliant 😃 Just make sure you sand everything and use plenty of wax, don’t use too much force, just carefully follow instructions and expect a couple of tight spaces. And I hope you enjoy the build 👌
@@MartinsAssemblyHaven yea, I finished spaceport last night. hooked up motor but running slow. have to hit crank once in a while but it works. How do I get the connection pieces for the two {spaceport & night city} to run together. Thanks for the videos you put up, they sure do help a lot. besides I love your accent, I'm Irish and German.
Ah that’s perfect, apart from the slow motor. It could be the cable, the first cable I had in hand was pretty old so I switched out and it worked a treat. You’re more than welcome, I’m just glad I can help out folks while enjoying a hobby of my own 😃 Ohh Irish and German, I love a northern Irish accent, they’re so cool. The connection/link kit is out on pre-sale, I’ll share an affiliate link if you fancy one, you just have to scroll down slightly and select the link kit only: shareasale.com/r.cfm?b=2573239&u=4069976&m=106192&urllink=&afftrack= or wait till it’s out on Amazon 😊
Some great news everybody, the ROKR Marble Spaceport and Night City Link-Up is finally out on Pre-Sale: shareasale.com/r.cfm?b=2573239&u=4069976&m=106192&urllink=&afftrack=
I’m rubbing my hand as I can’t wait for it.
And make sure you grab yours from the affiliate link above and thank you all and enjoy 😊
This is such an exciting build and I hope you all enjoyed the first part and please leave a like, Subscribe and ring the bell so you don't miss part 2 of this Marble Night City assembly 😊
Huntsville, Alabama, USA, here. First time assembling a marble run of any sort, so I'm greatly appreciating your step-by-step instructions as I work on this. Coffee beside me, time to start!
Hey Paul, all the way from Huntsville, that’s amazing 😃
And that is excellent, I really hope you find it helpful and everything goes well and enjoy 👌
An ex-pat, now living in West Kelowna, B.C. Canada. Just purchased all 3, which arrived today. Thankful for your videos and attention to detail. I can see it's going to be invaluable.
Hey, ah this is excellent, all the way from Canada 🇨🇦
That’s amazing, you’re going to have lots of fun ahead and thank you very much 😊
My nephew & I are doing this together for the 1st time and we had so much fun thanks to your videos!! Whenever we got stuck we’d go to the area of the video where we needed to progress. Your video was a blessing & tamped down on the frustration & you move at just the right speed. Thanks from Janine in Concord NC.
Hey Janine, Aaww I’m so delighted for that, so glad I was able to help and I’m glad you both were having fun assembling it 😊
All the way from NC that’s amazing 🤩
Have you guys got your next project on the list?
I just started the ROKR Marble Night City build. I am using your build videos and the instruction manual in combination. Your videos are fantastic, and so easy to follow. Thank you very much for posting them up for us.
Rob
Hey Rob, thank you so much for that, it’s really appreciated and I hope you get your model completed and then join the 2 marble runs together 👌
I am in Cranberry Township, PA, USA. I havent started building mine yet, but I already bought the Spaceport and Link-Up, so I will have those to build later on :) Thank you very much for this video, and especially the warning at the beginning to 'sand everything'....I sorta figured that I would have to do that.
Hey James, oh from a different part of the USA, that’s excellent 😃
And that’s brilliant, you’re gonna love both of the kits, apart from the motor once it’s connected to both of the runs, but just on spaceport it’s pretty perfect 👌
And you’re more than welcome, I’m just glad I can help out 😊
Just starting Night City. First one of these kits. Thank you for the help. From AZ USA
Hey, all they way from AZ, that’s brilliant 😃
And you’re more than welcome, I hope everything goes well with the kit and you enjoy the build 😊
M8 sometimes the book instructions can be a bit hard to figure out and sometimes that's good for me I can always come back to your wonderful video for the perfect finish 👍
Hey Mike,
Yeah you’re quite right about the instructions and I’m delighted my video can help and I hope you’re enjoying the build 😃
I got marble city and the link up this pass Friday and I immediately started....I had a similar situation with Run D, a small piece broke and I had to use the spare part.. Thank you for the tutorial on the proper way for Run D, I was worried that I was going to break it again. I'm not completely finished, but this helped me moved more forward.
Cheers, Jason
Hey Jason.
That’s excellent and you’re more than welcome, glad I could help and enjoy the rest of the kits 😃
My mom and I started this today. We love your videos and we enjoy your company. We are sending love from Kentucky! With your help we are determined to finish this! ❤
Hey Molly,
Aaww what a lovely comment, thank you very much for that and I hope I’ll be able to help you finish the whole marble run 😊
I used an Xacto knife helpful to cut parts out. I found sanding sticks very, very helpful.
Yeah that knife can be handy from the looks of things, I haven’t really had the need for one, but it could have been useful a few times. And that’s great, whatever helps you and makes it easier to assemble the models is great 👌
Excellent guide my friend.
Thank you very much for that, it’s much appreciated 😊
In Maryland out side of DC. I've done a bunch of these wooden puzzles and love them. I love how you and other do these builds so I can watch when I'm having issues putting them together.
Hey, aahh that’s awesome, there’s lots of folk here from the USA, amazing 😃
That’s excellent and yeah these kits are brilliant and I hope I was able to help out in any way 😊
Martin, I finally finished the Spaceport successfully and am now working on Night City. That “d” run was a real bugger for me. I broke those little railings 4 times! And kinda made a mess of trying to glue some of the parts back together. I was so glad you showed there was a backup A3 piece in your video. So I started over, and broke the damn rail AGAIN! This time, I hope, the glue will work better.
Hey, that’s amazing, well done 👌 Even if you broke pieces it’s okay as long as the marble run does its job you’re good, so well done again 😊
Have you got any other models planned to do next?
@@MartinsAssemblyHaven After I finish Night City (IF) I’m going to do the connector kit.
That’s excellent and you will be just fine 😊
About to start my kits, I got all 3 parts (Night, Spaceport & the link) Coming at you from Oregon in the USA. I enjoy your comments while building.
Hey Ted, that’s amazing, which kit did you start with first?
All the way from Oregon, brilliant and I’m glad you’re enjoying my comments 😊
@@MartinsAssemblyHaven The Night City as suggested. Thank you
Nice one. Just to warn you, you will come across just a few slightly frustrating/annoying connection areas, but you’ll be perfectly fine 👌
G'day from Australia
Hey Matt, another watch I got from the Australia, that’s amazing 😃
Hi Mike from WA Perth Australia 👍
Hey Mike, all the way from Australia, that’s absolutely amazing 😃🇦🇺
I hope you’re enjoying the video 😊
Hi, good start.
Alan from California, USA
Hey Alan.
Thank you very much and that’s brilliant, there’s a lot of people here from California 😃
I am from Denmark 🙂
Hey, aahh that’s amazing, absolutely love it and it’s such a beautiful country 😊
Hello!! I’m from Charlottesville, Virginia in eastern US. I’m eager to do this.
Hey Elliott, that’s excellent and you’ll enjoy it once you receive it, there are some challenging bits but you just have to take your time and be careful 😊
Florida, USA
Aahh that’s magic 😃 The sunny Florida ☀️
Hello watching you from the Netherlands 👋
Hey Anne, aww that’s just amazing, what a beautiful country it is. I’ve been to Amsterdam with my wife quite a few times and we can’t seem to stop going there for long weekends 😅
From Kent - the cheeky buggers in C***A sent me the wrong pack so I've had to buy again from UK
Hey, you’re joking? What did they send you instead then? 😅
Hey 3D, ready to start Night City. Wish me luck.
Hey Brian, that’s brilliant 😃
Just make sure you sand everything and use plenty of wax, don’t use too much force, just carefully follow instructions and expect a couple of tight spaces.
And I hope you enjoy the build 👌
@@MartinsAssemblyHaven
yea, I finished spaceport last night. hooked up motor but running slow. have to hit crank once in a while but it works. How do I get the connection pieces for the two {spaceport & night city} to run together. Thanks for the videos you put up, they sure do help a lot. besides I love your accent, I'm Irish and German.
Ah that’s perfect, apart from the slow motor. It could be the cable, the first cable I had in hand was pretty old so I switched out and it worked a treat.
You’re more than welcome, I’m just glad I can help out folks while enjoying a hobby of my own 😃
Ohh Irish and German, I love a northern Irish accent, they’re so cool.
The connection/link kit is out on pre-sale, I’ll share an affiliate link if you fancy one, you just have to scroll down slightly and select the link kit only: shareasale.com/r.cfm?b=2573239&u=4069976&m=106192&urllink=&afftrack= or wait till it’s out on Amazon 😊
Chesterville, Ontario, Canada
Hey Chris, that’s awesome 😃
Montréal Québec Canada
Aahhh that’s absolutely brilliant 😃
Would love to pop over to Canada for its nature and skiing 😊
Hallo uit Nederland. Not a very far away I'm afraid 🙂
Aahh that’s amazing, I love Netherlands 🇳🇱👌
privet im in Florida
Hey Michael. Oohh lovely, the sunny Florida 😃
I'm still assembl it , it's hard I started to get angered and tired from it .
Hey,
You just need to be patient and yeah take your time. Trust me I had a few frustrating situations, but just take a break and then return to it 🙂
Is there a part 3
Hey Claude, no not just yet, but should be out next week at some point as I’ve been really busy with work for the past week 😊
@@MartinsAssemblyHaven thank you will be looking forward to it
No problem and that’s excellent 😊