Volvo P1 Front Brake DIY At Home - How To Replace Brake Pads and Brake Rotors (S40, V50, C70, & C30)
HTML-код
- Опубликовано: 10 май 2020
- ►Brake rotors and pads are some of the most important wear items on any car. On a car with high mileage, it is critical to maintain and inspect your braking system often.
Usually, at every pad replacement, it is recommended that you inspect the braking system. You should be looking at the rotors for hot spots, rust, warpage, and to make sure they're within the minimum thickness specification which is listed on the hat of the rotor.
Today Nate Vincent, our Motorsport Director, along with his 5-year-old son, Oliver, tackle the front brakes on his new-to-him Volvo C30. During the brake job, he also shows you what else should be inspected while you're at it.
READ ON OUR BLOG: blog.fcpeuro.com/how-to-repla...
GET THIS KIT: www.fcpeuro.com/products/volv...
SUBSCRIBE: hubs.ly/H0cDnfN0
THIS KIT FITS:
Volvo S40
2004 Volvo S40 2.4L L5 Disc Brake Kit
Position: Front, Rotor size: 300mm
2004 Volvo S40 T5 2.5L L5 Disc Brake Kit
Position: Front, Rotor size: 300mm
2005 Volvo S40 Disc Brake Kit
Position: Front, Rotor size: 300mm
2006 Volvo S40 Disc Brake Kit
Position: Front, Rotor size: 300mm
2007 Volvo S40 Disc Brake Kit
Position: Front, Rotor size: 300mm
2008 Volvo S40 Disc Brake Kit
Position: Front, Rotor size: 300mm
2009 Volvo S40 Disc Brake Kit
Position: Front, Rotor size: 300mm
2010 Volvo S40 Disc Brake Kit
Position: Front, Rotor size: 300mm
2011 Volvo S40 Disc Brake Kit
Position: Front, Rotor size: 300mm
Volvo V50
2005 Volvo V50 Disc Brake Kit
Position: Front, Rotor size: 300mm
2006 Volvo V50 Disc Brake Kit
Position: Front, Rotor size: 300mm
2007 Volvo V50 Disc Brake Kit
Position: Front, Rotor size: 300mm
2008 Volvo V50 Disc Brake Kit
Position: Front, Rotor size: 300mm
2009 Volvo V50 Disc Brake Kit
Position: Front, Rotor size: 300mm
2010 Volvo V50 Disc Brake Kit
Position: Front, Rotor size: 300mm
2011 Volvo V50 Disc Brake Kit
Position: Front, Rotor size: 300mm
Volvo C70
2006 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
2007 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
2008 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
2009 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
2010 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
2011 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
2012 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
2013 Volvo C70 Disc Brake Kit
Position: Front, Rotor size: 300mm
Volvo C30
2008 Volvo C30 Disc Brake Kit
Position: Front, Rotor size: 300mm
2009 Volvo C30 Disc Brake Kit
Position: Front, Rotor size: 300mm
2010 Volvo C30 Disc Brake Kit
Position: Front, Rotor size: 300mm
2011 Volvo C30 Disc Brake Kit
Position: Front, Rotor size: 300mm
2012 Volvo C30 Disc Brake Kit
Position: Front, Rotor size: 300mm
2013 Volvo C30 Disc Brake Kit
Position: Front, Rotor size: 300mm
Get free parts from FCP Euro:
www.fcpeuro.com/page/lifetime...
Follow FCP Euro on:
/ fcpeuro
/ fcpeuro
/ fcpeuro
www.fcpeuro.com/ 
Авто/Мото
Doing a great job. Great presentation
Hi, just wanted to say thanks sooo much for making this video!! It has helped me out massively!! So well made and great detail really really good. Thanks!!👍
Outstanding, nice to see this kind of stuff 😎✌️
Glad you enjoyed it!
DRY ROTTED BRAKE HOSE?!!
If you have concern of the brake hose cracking when you hang up the caliper, you need to change the hose.
No question about it.
This is so useful !!! Thanks a lot
Glad it was helpful!
The most comprehensive diy so far. Thanks ! However, seems that something is not quite ok with my brakes. I have 300mm rotors, but my pads are not sitting inside the braking area as i see here.. the pads are a bit larger than the surface of the rotor.. Also the car suffering from slanted pads wear and vibration while braking. Need to look into it ASAP !
Nice shoes dude 🙂!!!
Many thanks! Only thing is when i was torquing the caliper bracket bolts back on they rounded off before i could get them to 120nm (the other side was fine) i did get aome tightness but id say more to about 60/80nm tightness before it happened. Should i be concerned?
HI Lewis, you most likely will be fine, if you can get a different size socket on it and double-check it, will certainly not hurt.
@@fcpeuro thanks for replying back I did get a fair bit of thread lock glue on them so Ill keep my eye on them and check the bracket. Great content btw. Many thanks
I have a 05' S40t5, and it's time for front brakes....It wasn't until I began shopping and comparing quality and prices, that I discovered that the model came with two different diameter rotors, I believe 300 and 320mm, and my car is a fwd auto. I've tried EVERYWHERE and EVERYONE I could think of, no one seems to be certain. Short of removing the wheels and MEASURING, I'm not sure what to do. Would you know? Would you know how to find out? Help!!!
Raymond did you try calling our customer service and giving them your vin? I'm sure they can get you straightened out with what you need!
@@fcpeuro I have not. Although I have done that w/ IDP since I've purchased a lot from them before. It was Thursday, so I probably won't hear back b4 Tuesday. Can't hurt to try FCP, but I haven't been successful finding parts for my Volvo....in fact, Someone responded to my request for price/availability...and wrote the following: We specialize in "European vehicles", and don't "feature" many volvo parts. On my honor, that's what he wrote back to me. Won't hurt to try again though. Thank you.
On your break housing the number should be on it.
So if it's 300 it will say 300 on it.
@@kurtlamprecht93 Thanks. I found that out.
mui boeno trarro
Very fine.thank you❤
You're very welcome, Somy!