great video, i just wanna know how you did the back corners behind the hood, I was doing a miata 2022 and had a hard time getting back there due to the windshield plastic panel being in the way and rubbing against the film
Nice slayed back presentation. I will be using XPEL and It was evident that you did not use a primer nor alcohol to tack the PPF. So, is your method heat only?
Fiskars 199800-1001RazorEdge Fabric Shears/Seam Ripper for Tabletop Cutting , 5 Inch On Amazon prime $13.22 Just cut and paste the above description and it will pull it up.
Hai sir myself vipin a wrapper in india, i have a question to you sir. Is that a good idea to use raw water instead of isopropyl as tack solution. Especially doing in Optic shield ppf...
Have you ever used a blade to make cuts on the panel or body of a car? I recently discovered splicing cuts on my Supra and the PPF looks pieced together. I was told cuts on the paint of the car will always be there when PPF is installed. Is that true??
@@stephenwhite5444 lol this is the same answer I’ve been getting everywhere else. Well that guys been fired. He’s paying for buffing and fixing all the cuts he did. Getting it redone by someone else. Thanks for answering me. Appreciate it.
At 0:44 on the corner of the hood I noticed that the way the film has been cut it there is no film to heat and wrap around the corner point. It seems it will just be folded over along the two edges. Could you explain why this way was chosen and not the way you demonstrated? Many thanks
That’s a pre cut ppf. A type of ppf that is cut by a machine according to the car type. I’ve used this type of ppf on a Mercedes a45s. More expensive than hand cut.
my man....monetize...free money for your yearly vacations...thanks for the great videos boss!
Thank you sir. I am wrapping nothing but corners all day and this video has been very helpful
.
Thank you for the tips. Getting ready to ppf my car.
As an installer hearing the squeak from you cutting is so satisfying and shows experience
My favorite part of this video is the looooooong selfie at the end....
great video, i just wanna know how you did the back corners behind the hood, I was doing a miata 2022 and had a hard time getting back there due to the windshield plastic panel being in the way and rubbing against the film
Thank you for the video brother ...question ?...what extension tip do you have on your propane torch ???
Nice slayed back presentation. I will be using XPEL and It was evident that you did not use a primer nor alcohol to tack the PPF. So, is your method heat only?
We will rinse the slip with tack solution and let it dry if we have time.
Hey there,,, Amazing video!!!! What would be a good cutter for PPF?
We use NT Blades from Amazon. BD2000
Can you shrink window film with that propane tip ???
What kind of scissors is that? Where can I buy that? Looks awesome, good job.
Those are fiskars and they are amazing. They can be purchased at fabric/art supply stores
Fiskars 199800-1001RazorEdge Fabric Shears/Seam Ripper for Tabletop Cutting , 5 Inch
On Amazon prime $13.22
Just cut and paste the above description and it will pull it up.
Okay dude where did you get the heat gun thing I have never seen that
How do you wrap them on the headlight corner or fender next to the a pillar.? There’s no way to use your fingers to pull it back.?
Wow what is that blow torch heat gun you’re using?
Can you send a link to that attachment you have on your propane tank I want one just like it.
once you lay the edge down go over it with silicone and that keels it from unpealing
What kind of scissor you use Sir? :)
Hai sir myself vipin a wrapper in india, i have a question to you sir. Is that a good idea to use raw water instead of isopropyl as tack solution. Especially doing in Optic shield ppf...
I think there is a reason they use isopropyl
Staright water works. Alcohol/water mixture gives better results and it also has some lubrication to it.
Hi can you tell me please what is the knife you use ?
Where do I get those scissors ??
Have you ever used a blade to make cuts on the panel or body of a car? I recently discovered splicing cuts on my Supra and the PPF looks pieced together. I was told cuts on the paint of the car will always be there when PPF is installed. Is that true??
Yes, when the installer doesnt know how to do it properly.
@@stephenwhite5444 lol this is the same answer I’ve been getting everywhere else. Well that guys been fired. He’s paying for buffing and fixing all the cuts he did. Getting it redone by someone else.
Thanks for answering me. Appreciate it.
@@francarlena8604 glad to hear they are taking ownership of the work and having it fixed! A lot of shops wouldnt.
@@stephenwhite5444 thanks! It was either coming to an agreement of stepping up to pay for the fix or a bad review.
What kind of heat gun is that Ron?
www.amazon.com/gp/product/B01HB1ACAS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@@PaintProtectionFilmAcademy What is that orange stuff wrapped on the head of the heat gun? Would love to get that on my heat gun. Thanks in advance.
At 0:44 on the corner of the hood I noticed that the way the film has been cut it there is no film to heat and wrap around the corner point. It seems it will just be folded over along the two edges. Could you explain why this way was chosen and not the way you demonstrated? Many thanks
That’s a pre cut ppf. A type of ppf that is cut by a machine according to the car type. I’ve used this type of ppf on a Mercedes a45s. More expensive than hand cut.
Waow great
You can't wrap ppf edges like vinyl
what brand of scissors do you use, could not find anything similar ?
Where can I get those scissors?