Hello András! Te milyen damilt használsz a 490-edbe? Képzeld nekem az új FS 461-be a 3.0mm-es négyzetes Stihl damil beszakad 2m-ként és összeolvad. Csabi azt mondta vegyek fekete kört 3.3-asat neki nem volt baja vele, de az itt is látható nem is koppintott vágás közben. Te mire esküszöl?
@@resurectionresurection8216 Én is folyamatosan tesztelgetem a damilokat! Amire azt mondanám, hogy nekem az eddig legbeváltabb, az Oregon 3 mm /zöld/ szögletes! Ha viszont erősen gazos a terület, akkor Husqvarna 3,3 mm /fehér Qvadra/ használom! Utóbbit csak a 490 birja! Az 553 rs már nem nagyon birja! Az Oregont ajánlom egy kipróbálásra!
Great video! Would you recommend getting 460 instead of 360? You said it is more powerful, but is it really noticeable in a grass like this (this is not a very tall grass)? And is it hard to work on a steep hill, would you recommend any of these two for that?
Hello, if you must choose one off them definitely I will recommend the Fs 460-C it’s not a big difference in power but yes it’s noticeable, I’ve been working also with them on slope and hillside and sometimes it’s not that easy but yes I recommend it because it’s not that heavy the Fs 460-c ,I have also machine that they are more powerful and heavier and with them it’s more difficult on a hillside but with the Fs 460- C you will do the job easily,🙋♂️
Csabi hi, is there any real-feel difference in weight and vibration between 361 and 460? On a paper, there is barely any difference. What´s your oppinion about backpack brushcutters from Stihl? It´d be nice, if you can get one to test.
Hello, between the two machines : they have exactly the same weight, I didn’t feel no big vibration just the usual , but in exchange it’s a difference in power the Fs 460 it’s more powerful. I never worked with a backpack brushcutter, so sorry can’t tell you my opinion, maybe in the future I will have the chance to work with a backpack machine, 🙋♂️
I hope you can help with my question I'm struggling to choose between FS 261 new or FS 410 2nd hand in very good condition. Same power, but FS 410 has 4 point vibration reduction and M Tronic and FS 261 has 1 point and doesn't have M Tronic. Is the 410 noticably better?
Hello csabi,i have one question for you. Is the clutch of the stihl fs460 the same as the stihl fs560 / 561? Because I wanted to replace the engine of the Stihl FR460 backpack version with Stihl fs560 engine, 57cc engine, to get a backpack version of stihl fs560 / 561. Good work.
Oszinte legyek egy uj gepbe nem lene szabad hogy a damil oszegjen az orsoba, a 3,3 mm az egy nagyon jo damil a video-ba mindeket fukaszaval azt hasznaltam , udvozolek remelem jo legyen a 3,3 mm damil,🙋♂️
@@andrasorosz566 igen kaszalas elott 24 h keresztul a Stihl damilt kel aztatni, en nem szoktam mert sokszor elfelejtem es anyira nem praktikus nekem a damil azas,🙋♂️udvozolek Andras baratom.
Hello I’m living in Romania but the Fs 561- C I bought it from Germany……now we can purchase it also in Romania, yes indeed it’s a good machine,i know it’s difficult to buy it maybe try to buy it from an online store that delivers it to your country, greetings from Romania 🙋♂️
Salutare, cu un rezervor plin va merge intre 50 de min si 1 ora, dar in schimb poti lucra linistit 4 ore si mai mult, te opresti doar sa alimentezi,🙋♂️
I want to work with a fs 460 I have a Stihl fs 380 and it is hard I want to see how a more powerful one is but they do not reach the Dominican Republic higher than the 380
Salut,poți să faci o filmare cu parculețul și plantele ornamentale,bănuiesc că este al tău,și eu am un parc dendrologic de 1 hectar cu aproximativ 1000 de plante ornamentale,in special conifere, folosesc și eu ustensile marca Stihl și fiskars ,te felicit pentru pasiunea și dăruirea pe care o ai pentru marca Stihl și pentru munca pe care o faci.
Salutare, eu nu am asa multe plante ornamentale am doar in jurul casei, banuiesc ca se ridica cam la 100 de plante, tu ai mult mai multe, eu am doar 0,5 hectar si in mare parte e livada de pomi fructiferi, o sa fac si o filmare cu plantele dupa ce o sa termin de aranjat gradina, multumesc mult de aprecieri, la fel iti doresc si tie si spor la lucru in parcul tau dendrologic,🙋♂️
Salut, detin un 461C, ai idee de ce la capu autocut 46-2 mi se-ntampla sa imi rupa firu din interioru capului (automat problema e ca trebe desfacut capu si refacuta infasurarea), folosesc fir negru de la stihl 3.3mm ... btw, foarte tari video-urile tale, spor in continuare.
Salutare, posibil sa ti se incalzeasca autocut-ul in interior ….. desfileteaza autocut- ul si curata bine sa nu aiba mizerii infasurate iarba si alte chestii care il pot incalzi si firul inainte de folosire tine l in apa la inmuiat timp de 24 de h astfel va fi mult mai rezistent la rupere, Multumesc,spor te salut,🙋♂️
Incălzirea capului se intâmplă atunci când tăiati iarbă sau buruieni de mărime foarte mare. In timpul tăierii firul se rupe, trebuie in functie de munca care o prestati, să dati drumul firului mai des afară. Dacă tăiati plante foarte mari si cu tulpina goasă si tare, atunci schimbati cu o lamă de fierăstrău marca Stihl sau cu cutitele cositoarei din dotare. Sper că v-am fost de ajutor.
Salut.am o pb daca ma poti lămuri?detin un fs 361 si se lipește firul de tambur in interior...am avut fir de 2,7 iar acuma am de 3 si face lafel.Ce pot sa fac ca ma streseaza maxim?practic zici ca se topeste firul 😢
Salutare, eu o singura data am avut aceasta problema, in primul rand verifica daca nu ai mizerie in jurul capului si din cauza frecari se incalzeste, cand pui firul pe cap nu il strange si lasa sa stea in apa firul timp de 24 h asa va fi mult mai rezistent la rupere ar trebui sa verifici daca ai suficienta vaselina in capul motocoasei daca deschizi surubul si ai vaselina pe surub este ok nu are nevoie de completare dar daca nu are vaselina pe surub ar trebui completat 8-10 g ,mi-a scris cineva ca da cu spray cu silicon pe tambur si fir si astfel nu se incinge, te salut si spor 🙋♂️
@@CsabiTools mulțumesc frumos de răspuns...sincer nu am verificat dacă are vaselina (e noua si ar trebui sa aibă)o sa dau jos autocut sa vad ce are...spor în toate sa ai
Üdvözöllek Csabi barátom! Szintén két profi gép👌👍nagyon jól dolgoznak! Jó egészséget kívánok ezekhez a profi gépekhez🤝👍
Hello András! Te milyen damilt használsz a 490-edbe? Képzeld nekem az új FS 461-be a 3.0mm-es négyzetes Stihl damil beszakad 2m-ként és összeolvad. Csabi azt mondta vegyek fekete kört 3.3-asat neki nem volt baja vele, de az itt is látható nem is koppintott vágás közben. Te mire esküszöl?
@@resurectionresurection8216 Én is folyamatosan tesztelgetem a damilokat! Amire azt mondanám, hogy nekem az eddig legbeváltabb, az Oregon 3 mm /zöld/ szögletes! Ha viszont erősen gazos a terület, akkor Husqvarna 3,3 mm /fehér Qvadra/ használom! Utóbbit csak a 490 birja! Az 553 rs már nem nagyon birja! Az Oregont ajánlom egy kipróbálásra!
@@resurectionresurection8216 A stihl- nek a 3mm sárgát nem szeretem! Nekem az szakadt be állandó!
@@andrasorosz566 Egészen elkeserítő, hogy veszek egy új gépet professzionális jó drága és a saját márkás drága damilja rossz hozzá :(
@@resurectionresurection8216 Igen ez szégyen! Gratulálok a géphez, és persze jó egészséget kívánok hozzá🤝👍
Great video! Would you recommend getting 460 instead of 360? You said it is more powerful, but is it really noticeable in a grass like this (this is not a very tall grass)?
And is it hard to work on a steep hill, would you recommend any of these two for that?
Hello, if you must choose one off them definitely I will recommend the Fs 460-C it’s not a big difference in power but yes it’s noticeable, I’ve been working also with them on slope and hillside and sometimes it’s not that easy but yes I recommend it because it’s not that heavy the Fs 460-c ,I have also machine that they are more powerful and heavier and with them it’s more difficult on a hillside but with the Fs 460- C you will do the job easily,🙋♂️
so wonderful beautiful video friend
Hello, thanks so much my friend, greetings from Romania,🙋♂️
@@CsabiTools no problem friend i like you really mutch
Csabi hi,
is there any real-feel difference in weight and vibration between 361 and 460? On a paper, there is barely any difference.
What´s your oppinion about backpack brushcutters from Stihl? It´d be nice, if you can get one to test.
Hello, between the two machines : they have exactly the same weight, I didn’t feel no big vibration just the usual , but in exchange it’s a difference in power the Fs 460 it’s more powerful. I never worked with a backpack brushcutter, so sorry can’t tell you my opinion, maybe in the future I will have the chance to work with a backpack machine, 🙋♂️
I hope you can help with my question I'm struggling to choose between FS 261 new or FS 410 2nd hand in very good condition. Same power, but FS 410 has 4 point vibration reduction and M Tronic and FS 261 has 1 point and doesn't have M Tronic. Is the 410 noticably better?
Hello, definitely go with the Fs 410 it’s whey more better and it’s a professional machine,🙋♂️
@@CsabiTools Thank you🙂
Hello csabi,i have one question for you.
Is the clutch of the stihl fs460 the same as the stihl fs560 / 561?
Because I wanted to replace the engine of the Stihl FR460 backpack version with Stihl fs560 engine, 57cc engine, to get a backpack version of stihl fs560 / 561. Good work.
Hello,sorry I don’t know my friend if it’s similar or different, when I have problems with my machines I always bring them to service,🙋♂️
@@CsabiTools ok thanks csabi don't worry good work
No, it is different, 490 and 560 is the same or 360, 410 and 460, you could replace the engne with the 410😁
Jó lett Csabi! Most rendeltem 3.3-as fekete Stihl kör damilt, amit ajánlottál, remélem az már nem fog szakadni és összeégni az orsóban :)
Én szoktam olyat is csinálni kaszálás előtt, hogy be áztatom a damilt!
Oszinte legyek egy uj gepbe nem lene szabad hogy a damil oszegjen az orsoba, a 3,3 mm az egy nagyon jo damil a video-ba mindeket fukaszaval azt hasznaltam , udvozolek remelem jo legyen a 3,3 mm damil,🙋♂️
@@andrasorosz566 igen kaszalas elott 24 h keresztul a Stihl damilt kel aztatni, en nem szoktam mert sokszor elfelejtem es anyira nem praktikus nekem a damil azas,🙋♂️udvozolek Andras baratom.
Foarte curios daca aceasta aparatoare noua se potriveste pe fs460 sau aparatoarea de la fs511, daca o poti monta pe fs560? 🤔
Salutare banuiesc ca se potriveste, aparatoarea de la 511 se potriveste pe 560.
What country are you from csabi tools I see that you use all the wood up to the fs 561 that I am crazy to work with that credit
Hello I’m living in Romania but the Fs 561- C I bought it from Germany……now we can purchase it also in Romania, yes indeed it’s a good machine,i know it’s difficult to buy it maybe try to buy it from an online store that delivers it to your country, greetings from Romania 🙋♂️
Привет
посоветуй что взять husqvarna 545rx или stihl fs491
заранее благодарю
Hello, definitely buy the Stihl Fs 491 it’s a stronger machine, 🙋♂️
❤
Érezni e hogy nyomatékossabb lett az áttétel a 361-en, damilfejjel melyik lenne az ideálissabb 361 vagy a 460???
Hello, ha a keto kozul akarsz valasztani az Fs 460-ast ajanlom,🙋♂️
@@CsabiTools Köszönöm,remek videókat készitesz.
Cam cât merge în lucru 361-C??, ar merge 4 ore fără oprire ??
Salutare, cu un rezervor plin va merge intre 50 de min si 1 ora, dar in schimb poti lucra linistit 4 ore si mai mult, te opresti doar sa alimentezi,🙋♂️
👍👍👍👍
Salutare si multa sanatate iti doresc,🙋♂️
I want to work with a fs 460 I have a Stihl fs 380 and it is hard I want to see how a more powerful one is but they do not reach the Dominican Republic higher than the 380
I understand, the Fs 460 it’s one off my favorite machine not so heavy and powerful enough,🙋♂️
Salut,poți să faci o filmare cu parculețul și plantele ornamentale,bănuiesc că este al tău,și eu am un parc dendrologic de 1 hectar cu aproximativ 1000 de plante ornamentale,in special conifere, folosesc și eu ustensile marca Stihl și fiskars ,te felicit pentru pasiunea și dăruirea pe care o ai pentru marca Stihl și pentru munca pe care o faci.
Salutare, eu nu am asa multe plante ornamentale am doar in jurul casei, banuiesc ca se ridica cam la 100 de plante, tu ai mult mai multe, eu am doar 0,5 hectar si in mare parte e livada de pomi fructiferi, o sa fac si o filmare cu plantele dupa ce o sa termin de aranjat gradina, multumesc mult de aprecieri, la fel iti doresc si tie si spor la lucru in parcul tau dendrologic,🙋♂️
Salut, detin un 461C, ai idee de ce la capu autocut 46-2 mi se-ntampla sa imi rupa firu din interioru capului (automat problema e ca trebe desfacut capu si refacuta infasurarea), folosesc fir negru de la stihl 3.3mm ... btw, foarte tari video-urile tale, spor in continuare.
Salutare, posibil sa ti se incalzeasca autocut-ul in interior ….. desfileteaza autocut- ul si curata bine sa nu aiba mizerii infasurate iarba si alte chestii care il pot incalzi si firul inainte de folosire tine l in apa la inmuiat timp de 24 de h astfel va fi mult mai rezistent la rupere, Multumesc,spor te salut,🙋♂️
Incălzirea capului se intâmplă atunci când tăiati iarbă sau buruieni de mărime foarte mare.
In timpul tăierii firul se rupe, trebuie in functie de munca care o prestati, să dati drumul firului mai des afară.
Dacă tăiati plante foarte mari si cu tulpina goasă si tare, atunci schimbati cu o lamă de fierăstrău marca Stihl sau cu cutitele cositoarei din dotare.
Sper că v-am fost de ajutor.
Super și foarte explicit care crezi că ie cel mai bun fir??
Salutare, multumesc, Stihl CF3-pro este cel mai bun fir,🙋♂️
@@CsabiTools nu ai cumva linc de undel cumperi ? Să mă uit la ei pe sait
@@mirceastrutenschi3532 salutare eu am cumparat din Franta rola de fir, incerca sa cauti pe Amazon eventual,🙋♂️
@@CsabiTools mersi mult eu am 360 cm foarte mulțumit de ea .
Salut.am o pb daca ma poti lămuri?detin un fs 361 si se lipește firul de tambur in interior...am avut fir de 2,7 iar acuma am de 3 si face lafel.Ce pot sa fac ca ma streseaza maxim?practic zici ca se topeste firul 😢
Salutare, eu o singura data am avut aceasta problema, in primul rand verifica daca nu ai mizerie in jurul capului si din cauza frecari se incalzeste, cand pui firul pe cap nu il strange si lasa sa stea in apa firul timp de 24 h asa va fi mult mai rezistent la rupere ar trebui sa verifici daca ai suficienta vaselina in capul motocoasei daca deschizi surubul si ai vaselina pe surub este ok nu are nevoie de completare dar daca nu are vaselina pe surub ar trebui completat 8-10 g ,mi-a scris cineva ca da cu spray cu silicon pe tambur si fir si astfel nu se incinge, te salut si spor 🙋♂️
@@CsabiTools mulțumesc frumos de răspuns...sincer nu am verificat dacă are vaselina (e noua si ar trebui sa aibă)o sa dau jos autocut sa vad ce are...spor în toate sa ai
Mot máy bao nhieu ban oi
Fs 460 1000 € and Fs 361 800 €.
:)
🙋♂️
@@CsabiTools I bought a 361 c-em. very powerful machine. I watch your videos and I like you.
Thanks , I’m glad, greetings 🙋♂️
Érezni e s