Grew up hearing that annoying sound of chainsaws everyday since my dad owned a tree service ,these videos always show cutting the tree down but never the time consuming hard work of cutting the tree into pieces and loading it all up on the truck and unloading it at the dump , that's where the work begins
Big trees have already lived. You want to harvest them before they die. Young tree's are the ones that need to be left alone. If you keep with your mentality, then how will the future generations have any large trees? You're backwards. :)
@@mottthehoople693 Death is an illusion. There is no such thing. All things decide on what life continues on mother earth or what life returns to the spirit world. You decide, when drive through the drive through. You decide when you go to the grocery store. You decide when you hunt and fish. Every time you eat meat, nuts, vegetables. Even a single blade of grass carries a spirit. Even a single flower. If you mourn the "death" of a tree, then also mourn the death of whatever it is that you consume, for the spirit in every living thing, are equal.
‘The tree is perfectly straight, in the middle of a field, no wind, and absolutely no rot or defects. How do you want to approach it? Simple face cut and drive it home?’ ‘Well, let me put on my gear….all my gear, and let me really get in there, go ahead and throw some notches here and there and everywhere. Face cut, sideburns and what I like to call notch on notch’
Depends on your local, but ash from volcanic eruptions can be trapped in the bark, after running those rip cuts if that is the case she'd be dull asf. He spent all his money trying to look the part, should use his ax to clear a line for the bar.
I was like "does he really need to put in several wedges if they have a backho helping out?", then I saw them making room for a jack. 🤣 Why not put a tow line on it as well and add a pusher for good measure?
Mama always said "Son, better safe than sorry" 🧓, you just gotta pound some wedges, sometimes even when you don't need 'em lol, Nah but seriously I know people who didn't pound wedges because they thought it wasn't necessary or they thought it was a waste of time, or if the tree had no lean that needed to be addressed they thought that it would be overkill, but I witnessed an event that proved otherwise, know a guy who basically said that on a job once, "it takes to long, I'm just gonna cut on thru and put it on the ground, should be fine" or so he said/thought, he's finishing the back cut up, next thing I know he's making the final few miniscule cuts to the far side of the hinge and the tree sits right on down tightly on his bar, pinning it tightly to the stump, rendering it completely immovable, until here to save the day "It's a Bird, It's a Plane, ... It's SUPERWEDGE", All that had to be done from there was a little lift was placed on the tree, chainsaw was removed, tree was fell and thank God that it didn't sit back aggressively enough to break hinge, etc., it could have ended very badly
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
The dude in all the orange get up … sure as hell doesn’t earn his living in the woods. Dull saw, and the goofiest undercut and back cut system I have ever seen! Poor tree suffered the “ death of a thousand cuts!”
The orange guy doesnt know about the sight on the saw. Put the bar in the face cut and use the sight.. its a line the runs down both sides of the power head. It is a sight for aiming the tree.
The last lad made a meal of his face cut and threw saw dust in the air at 11:23. What for? There was no wind, and it was clear which way the tree was going to go. The saw could also do with a sharpening.
Michael, all is clear the last lad more used to playing golf than felling trees. 🤣. Highly amused by the technique of evaluating any wind force on the canopy by opting not to look at it, and to inspect sawdust thrown at shoulder height instead - absolute magic 🙄
It was long enough. You can fell a tree approximately 2.5 times the bar length. BUT if the tree is between 2 and 2.5 times the bar length, you need to make a plunge cut in the middle of the hinge to cut up the center of the stump. These rookies obviously forgot that part.
Ah, the sweet sound of torturing Tinnitus to plague these guys for the rest of their lives. Can never understand the aversion / laziness to not wearing earmuffs. Do they think their ear drums are made from steel or they are just too cool to wear them? Stupidity personified.
"Stupidity personified"??? Simply because of your personal assumption that they're not wearing hearing protection???? Even if that were to be true, you don't think it's possible they perhaps are just ill informed instead of immediately having to resort to labeling them as stupid? Jesus christ, dude. Get over yourself.
That last guy 🤣🤣🤣 The Full orange safety suit didn't help him at all.. You should have to show ID to buy a saw I swear.. I'm not even a pro and that guy had me rolling on the floor.. Bending the bar, stalling the chain, saw jumping all over the place WTF..
That should have been done with a bigger saw like a Stihl 088, and a pulling line attached to the digger at the other side of the tree to pull it over, just be careful lads it only has to go wrong once
Trees are like any other living thing, and have a finite life span. Usually when they get this large the core of the tree is rotting out. I had 4 oak trees about the same size along one side of my house. I knew I had to have them removed or they would have gone over in a storm and crushed my house. After the lumberjacks cut the trees down they were completely hollow for the first 20-25 feet. It was just a matter of time.
🌲🌳 that wedge cut and the cut at the back of the wedge makes sense, the weight starts leaning towards the gap in the wedge and back cut removes the resistance to fall into the wedge. 🌲🌳
I'm not the brightest star in the sky BUT they have a backhoe pushing high on the tree to make sure it lays the right way so all that extra work mist be for the video WOW . Always work smarter not harder !!
“Incredible” and “fast” were two words that didn’t come to mind while watching this video. In the very first clip, the backhoe was a nice paperweight. It obviously couldn’t push the tree…
His rakers are low which is fine but he needs to dress his bar. If he let’s the saw do the work instead of trying to force it he would have been done in half the time.
Doesn’t have enough power to pull the cutters through because he filed the rakers to far and as mentioned above a sharp chain doesn’t need down pressure. The saw will pull itself through
Bet the guy at 8:24 got a fancy sharpening tool when he bought the showroom but never files his guages. I almost couldn't watch anymore.. never seen so much crotch aiming and the sawdust in the air to check for wind was about all i could take but 11:30 seeing him try to start an already running saw was worth it.
Interesting watching it for the first time. But got a dizzy head after watching it. Maybe due to the unsteady scenes. Suggest using a tripod, steady hands or gimbal.
Complete amateurs every one, not a professional among them. I've Ben a professional faller and Trainer/Assessor in the timber industry for 50 years and I've never seen such incompetence.
Huge "dangerous felling" in an open field with a backhoe 2 extra guys and wedges out the ass😂😂😂 what are you in danger of dropping the saw on your foot
Grew up hearing that annoying sound of chainsaws everyday since my dad owned a tree service ,these videos always show cutting the tree down but never the time consuming hard work of cutting the tree into pieces and loading it all up on the truck and unloading it at the dump , that's where the work begins
Kinda like hunting... Once the shot is fired, the real work begins
or u use it for firewood?
That annoying sound is the sound of money 💰 being earned. And yes it's rough on a hangover 🤣
@@aaronjackson5862 yessir
Why all the wedges, and jack, with a backhoe hooked to it pushing!
let's just stand right next to the tree as it's falling. don't worry about it twisting or kicking back towards you
Amatorzy 🤣😂😁😂🤣🤣😂😁
Do you even cut bro?
Good pie n a bob to support no need to worry if you know what your doing
@@leitch100it could barber chair
Last guy was making a chainsaw sculpture that accidentally fell😂
DAMN - that last guy sure did make a career out of that one tree, never seen it take a week to fell one tree.
Ķu7to
With the price of gas, he ain't getting rich is he? lol
His chain seemed dull af also
He checked the wind though. Pro
He sure bogged that saw down a lot. That clutch will be gone soon with that type of cutting. He sure looks professional with all that Stihl gear on.
The last guy would be laughed out of the woods wasting that much gas/time to drop a tree.
Most of these 'fallers' would be laughed out of the woods by the pros... or chased...
Ofc some random ahh npcs know better
@@4rl0ng Speak English if you're capable of it.
Would help to have a bigger saw than that toy
@@4rl0ng Anyone with grammar like yours needs to stay away from anything requiring an adult mind...
like chainsaws.
The last guy bought all the necessary gear, minus a file 😅 Come on man, that poor saw was farting dust.
His saw most definitely had Covid
I always feel bad cutting big trees that are like 1,000 years old. I stick with the younger ones.
It was dead:( and weighed towards the road.
Younger trees take more co2 out of the air then old trees so that's actually backhanded thinking
Big trees have already lived. You want to harvest them before they die. Young tree's are the ones that need to be left alone. If you keep with your mentality, then how will the future generations have any large trees? You're backwards. :)
@@Warrior_Resisting_Colonialism so who decides when they are going to die? You? who decides when you are going to die?
@@mottthehoople693 Death is an illusion. There is no such thing. All things decide on what life continues on mother earth or what life returns to the spirit world.
You decide, when drive through the drive through. You decide when you go to the grocery store. You decide when you hunt and fish. Every time you eat meat, nuts, vegetables.
Even a single blade of grass carries a spirit. Even a single flower.
If you mourn the "death" of a tree, then also mourn the death of whatever it is that you consume, for the spirit in every living thing, are equal.
*2:15** 😲 Wow, I could almost feel the sawdust in my nose! Amazing work!*
11:31 - tries to start his already running saw.
Hahahaha.... 😂🤦
Lol, yea he definitely did pull it running. Pretty hard to understand the concept of all that powder he made.
@@jarrohleddy4038 More dust to check the wind!
Must be some good ear protection if he can't hear the saw running .
‘The tree is perfectly straight, in the middle of a field, no wind, and absolutely no rot or defects. How do you want to approach it? Simple face cut and drive it home?’
‘Well, let me put on my gear….all my gear, and let me really get in there, go ahead and throw some notches here and there and everywhere. Face cut, sideburns and what I like to call notch on notch’
Notch on notch! Man that is some funny shit-cause it's true. The video, an the comments are the best laugh I've had in yrs!! Sideburns!!!!!
Notch on notch...😆🤣😂
1 for the effort of 5
I bet you the guy in the orange gets paid by the hour.
Absolutely, no other reason for a proffessional to have such a dull chain... Among other things..
Rakers are filed down to far making it grab more
Depends on your local, but ash from volcanic eruptions can be trapped in the bark, after running those rip cuts if that is the case she'd be dull asf. He spent all his money trying to look the part, should use his ax to clear a line for the bar.
Further assessment he's a noob, dresses the part that's about it
@@justinother704 a very valid point!
The guy at the end way overdid everything. I wouldn't get a damn thing done if I wasted that much time just for one clean cut leaner.
At 11:31 he even attempted to start his already running saw!
Modern day Charlie Chaplin.
The last guy was really hard to watch. It was like watching paint dry. Or he could be demonstrating a dull saw :)
I was like "does he really need to put in several wedges if they have a backho helping out?", then I saw them making room for a jack. 🤣 Why not put a tow line on it as well and add a pusher for good measure?
Big ass tree crush that backhoe like an old cigarette butt. Hard to tell just how tall it was in a video.
Mama always said "Son, better safe than sorry" 🧓, you just gotta pound some wedges, sometimes even when you don't need 'em lol, Nah but seriously I know people who didn't pound wedges because they thought it wasn't necessary or they thought it was a waste of time, or if the tree had no lean that needed to be addressed they thought that it would be overkill, but I witnessed an event that proved otherwise, know a guy who basically said that on a job once, "it takes to long, I'm just gonna cut on thru and put it on the ground, should be fine" or so he said/thought, he's finishing the back cut up, next thing I know he's making the final few miniscule cuts to the far side of the hinge and the tree sits right on down tightly on his bar, pinning it tightly to the stump, rendering it completely immovable, until here to save the day "It's a Bird, It's a Plane, ... It's SUPERWEDGE", All that had to be done from there was a little lift was placed on the tree, chainsaw was removed, tree was fell and thank God that it didn't sit back aggressively enough to break hinge, etc., it could have ended very badly
Nah not the way he had it notched it was fine with 3 wedges
First one had enough hydraulic power available to fell the tree without any chainsaw 😂
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
哇！哇！哇
The dude in all the orange get up … sure as hell doesn’t earn his living in the woods. Dull saw, and the goofiest undercut and back cut system I have ever seen! Poor tree suffered the “ death of a thousand cuts!”
lol oakies all the way
I came down here to see what people thought about his get-up. It looks like he went through the catalog and bought one of everything.
He literally pulled the rip cord on the saw with the saw already running also. Lol
At 11:25 or so ? Mr Orange picks up some sawdust ,throws it in the air...wtf...lol
@@chance6298 He's checking which way the wind is blowing, hilarious.
First guy needed a backhoe, bottle jack, wedges, and about 900 acres of open space to drop a medium tree. #rookies
It's a miracle that they haven't murdered themselves yet.
@@darrellparkhill killing yourself isn't murder its stupidity.
@@donaldevanshennings7732 God taking out the trash, perhaps…
He was using quite a small saw too. I guess the big one he placed on the stump at the end had broken down.
Right on top of the other one 😂
The orange guy doesnt know about the sight on the saw. Put the bar in the face cut and use the sight.. its a line the runs down both sides of the power head. It is a sight for aiming the tree.
Every big mouth becomes a pro when watching from a far. We all do what is needed to get the job done.
Exactly
The last lad made a meal of his face cut and threw saw dust in the air at 11:23. What for? There was no wind, and it was clear which way the tree was going to go. The saw could also do with a sharpening.
Michael, all is clear the last lad more used to playing golf than felling trees. 🤣. Highly amused by the technique of evaluating any wind force on the canopy by opting not to look at it, and to inspect sawdust thrown at shoulder height instead - absolute magic 🙄
Rumour has it this guy is still felling that tree…
Seeing machines care for nature while working-mind-blowing!
São os ricos que acabam com o mundo
I never knew so many professional tree cutting Karen's existed until I read these comments lol.
the woods are full of us.
Ikr,but that's in almost every trade video 😂😂
Cowboys on the first tree and an accident waiting to happen and was the last guy making a meal out of cutting that tree down?.
the first tree? center core of the tree was untouched by the chainsaw because the chainsaw bar was not long enough to reach it
Nothing gets past you!👍
It was long enough. You can fell a tree approximately 2.5 times the bar length.
BUT if the tree is between 2 and 2.5 times the bar length, you need to make a plunge cut in the middle of the hinge to cut up the center of the stump. These rookies obviously forgot that part.
That tiny bar in that huge tree🤣🤣
It's not the size of the bar it's how you use it 🤣
If the saw is to small, whittle the tree down to size.
Like the way he was astride his chainsaw while jacking the tree & it was running 😂😂
That's a badass wood chipper lol
プロの伐採テクニック素晴らしい～♪
Ah, the sweet sound of torturing Tinnitus to plague these guys for the rest of their lives. Can never understand the aversion / laziness to not wearing earmuffs. Do they think their ear drums are made from steel or they are just too cool to wear them? Stupidity personified.
qà522
Yeah and you can totally tell they aren’t wearing ear plugs because
Pp
"Stupidity personified"??? Simply because of your personal assumption that they're not wearing hearing protection???? Even if that were to be true, you don't think it's possible they perhaps are just ill informed instead of immediately having to resort to labeling them as stupid? Jesus christ, dude. Get over yourself.
All the people keep cutting their hinge wood, they are really playing with danger when they do that!
What does that mean you dont cut all the way across
@@kong4679 look up "guilty of treeson how to fell a tree" he explains it better than me
That chipper 4 min in is a beast. Wow
I didn't know a bottle Jack made that sound when you pumped it up LMAO
Well it sounds that way when you speed the video at 150%
THATS FLIPPING HILARIOUS 😂, SERIOUSLY
The dude in the green and yellow sweatsuit though, I fucking can't. Lmao
The guy in the gear , really has no idea lol
Keren, tekhnik yang sempurna
It's actually a Husqvarna chainsaw in the first felling, by far the best IMO.
Luar biasa kayunya besar
Really awesome
Very good work and the genius of the experts on wood is great ok boss, greetings continue to be successful. greetings from Indonesia ok
thank you so much
That was the tallest notch ive ever seen!
That last guy 🤣🤣🤣 The Full orange safety suit didn't help him at all.. You should have to show ID to buy a saw I swear.. I'm not even a pro and that guy had me rolling on the floor.. Bending the bar, stalling the chain, saw jumping all over the place WTF..
That what happens when you fall a tree on LSD
Oh, but they've all had the 'course' from some girl with letters after her name.
Perhaps a field sobriety test is in order?
There's some interesting techniques going on in some of these and not in a good way in my opinion.
The jack in the first one....
Mantap habis
Dang, that coulda been my great great grandfather
I heard these things and I felt like I was in a horror movie
I thought the last guy was kinda cool until I started reading the comments. Shows how much I know about tree felling 😂😂
Woww,, keren 👍👍👍🤝🤝♥️♥️
Good job my freand👍👌👍👍👍
Penebangan pohon yang luarbiasa dan melibatkan alat berat dan tehnik yang tepat dan juga skill yang mumpuni
Ok mantap sukses semangat mampir 👍
What a shame to cut this giant . Looks to be one of the last big trees in the area
That should have been done with a bigger saw like a Stihl 088, and a pulling line attached to the digger at the other side of the tree to pull it over, just be careful lads it only has to go wrong once
Trees are like any other living thing, and have a finite life span. Usually when they get this large the core of the tree is rotting out. I had 4 oak trees about the same size along one side of my house. I knew I had to have them removed or they would have gone over in a storm and crushed my house. After the lumberjacks cut the trees down they were completely hollow for the first 20-25 feet. It was just a matter of time.
This looks to be in Russia maybe. They have plenty of big trees there
To make house for goat before winter comes and goat freeze before spring.
Гореть им в аду!
🌲🌳 that wedge cut and the cut at the back of the wedge makes sense, the weight starts leaning towards the gap in the wedge and back cut removes the resistance to fall into the wedge. 🌲🌳
ruclips.net/video/mYy7puhYXwU/видео.html 😱
ok friends, good luck, keep going, greetings from Indonesia, ok, great, the wood is very big, ok, hopefully your channel will develop quickly ok
What Chainsaw was that.? Very powerful engine !!
I thought it's Stihl Chainsaw
Impressive speed and skill in felling a large tree with a chainsaw, showcasing the danger of using a Stihl chainsaw for tree cutting.
I'm not the brightest star in the sky BUT they have a backhoe pushing high on the tree to make sure it lays the right way so all that extra work mist be for the video WOW . Always work smarter not harder !!
Pohon yang sangat besar,😮 kayu nya pastinya sangat mahal 😮😮
Looks like the last big tree standing... good job fellas, your fired
I notice great care is made to keep the stump flat.
“Incredible” and “fast” were two words that didn’t come to mind while watching this video. In the very first clip, the backhoe was a nice paperweight. It obviously couldn’t push the tree…
First clip, that Backup is the BOSS! 😊
Rookies always think that are pros right up to the point where something goes wrong
Starting after 4:55 it was agony seeing that much equipment and such a small saw. I guess the world isn't made of money.
That’s not that small of a saw and it’s a smaller tree a ms 260 could cut that tree down
@@rhec4208 I watched it again and it was after 5:04. I agree with you.
Mostly pretty shit falling. Coming from a qualified faller in Australia and we are dodgy
And from a german
And from.Holland
Waow amazing 👀👈
I think osha was there that day with all that orange
The guy in orange really needs to sharpen his chain.
His rakers are low which is fine but he needs to dress his bar. If he let’s the saw do the work instead of trying to force it he would have been done in half the time.
Doesn’t have enough power to pull the cutters through because he filed the rakers to far and as mentioned above a sharp chain doesn’t need down pressure. The saw will pull itself through
Or not hit dirt
Imagine burning a whole tank of gas dropping one tree
Done it.
I've watched a log come out of chipper fly 100 feet put big ass dent in a truck don't stand behind or walk behind one
Good job
Utamakan keselamatan bos,dan tetap semangat
be careful, it's a dangerous job, good work 💪💪💪
Bet the guy at 8:24 got a fancy sharpening tool when he bought the showroom but never files his guages. I almost couldn't watch anymore.. never seen so much crotch aiming and the sawdust in the air to check for wind was about all i could take but 11:30 seeing him try to start an already running saw was worth it.
Heartbreaking seeing these big old trees come down. The history they've seen, & what they've endured over their existence...
Good job guys 👍
Any self-respecting tree man would never destroy a healthy tree just for the sake of making a video to show off, and the money.
Amazing 👍👍👍
Stihl Chainsaw is the best on stability and durability.
Owned by husky
The last guy watched every RUclips video, purchased every piece of equipment and still doesn’t get it. Typical Stihl guy
ทีมเวิคเยี่ยมจริงๆ
in the first clip shows you a good way to go about getting a barber chair to happen..but i will say thats one hell of a beast of a chipper.
Not in that size diameter wood with that much backcut.
Meanwhile guys gutting down 200FT trees in California still use wedges.
Look at the wedge. The jack never even gets the tree past 1 1/2 wedges.
Interesting watching it for the first time. But got a dizzy head after watching it. Maybe due to the unsteady scenes. Suggest using a tripod, steady hands or gimbal.
Complete amateurs every one, not a professional among them.
I've Ben a professional faller and Trainer/Assessor in the timber industry for 50 years and I've never seen such incompetence.
Hello Hello bạn
What a god dam crime cutting down that 100+ year old tree
Worauf sitzt du? Worauf Ißt du. Worauf schreibst du?
Excelente
He’s a Jack of all trades!
👍👍👍👍
Are you guys in a race or something? The amazing part was you did it with a Husqvarna
Love those easy ones.
This lumberjack 5.02 - -> is good talent, so professional.. One of the best i never seen.. 👍👍💪
Fastest skills Cut down giant trees with chainsaws, cut trees with dangerous Stihl chainsaws
wonderful！
No hay excusas en talar árboles centenarios, si están ahí se les debe de respetar.
Tehnik Potong seperti anda Kayu Rusak bagian bawah ,
Keren bos 👍👍👍
Huge "dangerous felling" in an open field with a backhoe 2 extra guys and wedges out the ass😂😂😂 what are you in danger of dropping the saw on your foot