Brick Wall Pattern Cutting Board
HTML-код
- Опубликовано: 5 май 2018
- A Brick wall pattern cutting board made from hard maple and walnut.
Check out my website at www.brandonhartman.com
/ brandonhartman
Some of the tools I use in my shop:
Full Disclosure: As an Amazon affiliate I may earn a commission from qualifying purchases.
Whiteside 1/4" Spiral Bit: geni.us/5kAg
Incra I-Box: geni.us/IBTI
Sweetheart Chisels: geni.us/GDI2
A-Line It Kit: geni.us/dHG4579
WoodRiver #4 Bench Plane: geni.us/N3pit
WoodRiver #7 Jointer Plane: geni.us/2UqjiJ
Porter Cable Router: geni.us/AemaL
DeWalt Palm Router: geni.us/KjWcY1
Whiteside Surfacing Bit: geni.us/0ibEA25
Freud 10" Crosscut Blade: geni.us/k15o
Freud 10" Rip Blade: amzn.to/396AqkI
Festool Vac: geni.us/TSNSAPu
Festool Track Saw: geni.us/TbKs1UT
Festool Plunge Router: geni.us/B4ro4
Festool Rotex Sander: geni.us/xMfj1o
LED Shop Light kit: geni.us/QoJmNa
More tools I use: kit.co/bhartman/tools-in-my-shop
Camera Gear Used: kit.co/bhartman/video-making-...
Very good video presentation, and excellent end-grain cutting board!
Thank you!
@@brandonthebuildertx a
Excellent work!
Wow ! It is prefectly made !
Thanks!
BEAUTIFUL!! LOVE THIS!!
Nice work.... and no goofy music too. 👍🏽👍🏽👍🏽
Very Nice! 1- Thanks for the tip on the router bit, I'm gonna buy one and try it out. and 2- Every cutting board i've ever made contained Walnut and then a variety of other species. Again, very nice
Thanks!
Beautiful. Great idea for those of us who don’t own a planer!
If I had know this I wouldn’t have bought a planer.
Excuse me what is the name of that tool
@@estebangutierrez9941 Which tool?
@@estebangutierrez9941 He's using a router and a routing sled. For stuff like this it'll work great, I've used the same method to flatten tree stumps before.
I like the idea of using the router like a planer! 👍
Brandon, I built this board from your video about 2 years ago and it turned out great. About to build my second! Thank you!!!
I'm glad you found it helpful!
This cutting board gives me astigmatism
Splendid, magnificent !!!
Cookie sheet genius.
Thank you
Sensacional. Excelente trabalho. Parabéns.
Très beau travail 👍
Genial gracias por compartir.Saludos de Lima Perú.
Wow!
That is totally Epic 👌
👏👏Esta precioso. Mucho trabajó.
Thank you
Great video. Thanks. Subscribed!
Wow ~ 장인이 만들면 예술품이 됩니다!🇰🇷💕👍
Wow~ Artifacts are made by artisans!🇰🇷💕👍
Very cool!😍👍
Great build, very geometricly satisfing!! Well done sir
Excellent planing jig
Echt gute arbeit , gefällt mir sehr gut...
Awesome job!
New challenge: 45° herringbone pattern with contrasting perimeter
Не понимаю(( за что дизлайки) просто приятно посмотреть на красивые, оригинальные вещи) понятно, что это не каждо у доступно иметь площадь для этого и столько инструмента) так это другое дело)
Great job. I want to do something like this when I get the equipment for it.
I used this video to make one of my own, ty! I learned a lot. Fun project
I'm glad it helped!
Awesome work!
Thanks!
Trabalho incrível, parabéns. Saudações aqui do Brasil.
Great Video. Love how your daughter came in :).
master piece very good job......
Looks Great
Thanks!
Was looking for something in the comments and went all the way to the beginning. Wow was this video trolled. So much so I forgot what I was looking for to begin with. But some people are laughable. Great work.
Beautiful!!!
Brilliant 👏
So wondfeaul and Beautifaul work. Iliik it 👍💯❤
Muito bom
Obra de. Arte sussesso amigos.
Very good idea 👌
Excellent work :smile:
Nice work
Thanks!
Mind blowing
Nice Job
Awesome!!
Che talento ! Bravo
Merci du partage!!
Very nice, thanks for sharing.
Thanks for watching!
Anytime and sub'd!
Great job. I might just try my hand at this, now that I suddenly seem to have a lot of free time on my hands.
Oh, and thanks for not adding an overly loud disco techno party soundtrack and making a huge mess out of it. I've never understood why that's a thing.
Bravooo 😀
Excellent work. What routing bit size and type did you use to do the flattening? You made very quick work of flattening it.
Perfect
Строгание фрезером -это конечно круто.
Black font with white border can be seen on any color, would make it much easier to read
Great work! What are the original dimensions of the blanks?
Love your job wish you gave the dimension on the cutting board
عمل رائع
فكرة الروتر مفيدة
Hey man I was thinking of building this design aswell then I stumbled across your video when you look at the finished shopping board from a birds eye veiw like as you're about to cut something what are the measurements of the brick and mortar?
I am going to make one of these for my mate he is a huge Pink Floyd fan.
Nice work 👍. I prefer it without the fillet 😅
Do you have thoughts on spraying the board with water after your initial sanding to raise the grain? Then sanding again to get the fuzzies off? And then applying your final coats of oil....
Thats what I do. I didn't film that part in this video, but I've showed it in the more recent ones.
Do you have the measurements to make this? Pretty cool looking
Show, Send this board to me here in Brazil.
Trabalho lindo 👍🏻👏🏻👏🏻👏🏻
No crappy music, no incessant babbling, no annoying wives/girlfriends, kids or pets.
Good job all around, nice board.
Beautiful how much to buy one?
its cool
Nice video!!
May i know what was that liquid you we’re putting?
That’s super nice! Do you have rough detentions of the board and of the wood strips before glueing?
Thanks! The board ended up about 15 3/4" x 9 1/8". The bricks are about 1 1/8" x 1 7/8". The mortar strips are 1/4" thick, and the finished board is 1 7/16" thick.
classy
Cakep, ntar ane belajar ama nte
Great work, you might want to look into using Coconut Oil for your boards...
coconut oil is NOT recommended! can go rancid
like
Magnífica 😍😍😍😍😍😍👏👏👏👏👏👏👏👏
Thinks
Nice work! The mineral oil added at the end must be food grade mineral oil.
Yeah. This stuff is from walmart.
can I learn the both wood material?
which tree are you using for this?
I just started and was wondering where to find those find types of wood? Big box stores don't really carry anything like that
Search your area for a hardwood supplier. I'm in the Houston TX area, and buy my lumber from Houston Hardwoods.
what type of wood is that?Exellent job.
Walnut and hard maple.
I think you forgot something the Super loud music thanks and I appreciate it nice board by the way
Thanks! I'm more a fan of letting the tools make the music.
Brandon Hartman - Woodworking there you go, the way should be 👍
Very nice job. Only thing is brick layers don't line up the joints anymore let alone stager them correctly. They do a horrible job you do a perfect job. Thanks
Hoe big did you cut your second strips, the ones with the bit of dark walnut in
Show!
What are the dimensions of the boards before gluing?
Oh yea, strip dimensions? Just curious to make a ratio.
Which mineral oil you used???
Any food safe mineral oil will work. This particular stuff came from the local Walmart.
What kinda but did you use for your router to plane the top?
I use this one geni.us/0ibEA25
👌👌👌👌
Thanks in Algeria for you
Just curious... did you plane it with a router because you don't have a regular planer, or because the router is better for some reason?
Similar question for sanding... orbit sander better than a drum sander or do you not have a drum sander?
I have a planer, but you don't want to run an end grain board through it because there's a risk of it blowing apart (damaging the board, planer, or both). There are ways to lower the risk, (gluing on support boards, super shallow passes, helical cutterhead) but doing it with a router sled is much safer for both the board and the board builder.
I took some pictures from your video and went out and showed the shop 🏬 owner he also makes wood 🪵 stuff 🚪🪑🪟🪞but he refused saying it is very difficult not working always.He said it is very difficult, we cannot do such a thing. ☹️
Please tell me the L W H of hard maple and walnut, please.
Nice work. Is that some special food grade glue?
This board was made with Titebond 3. It's rated food safe, as is Titebind 2 which I use more often now.
@@brandonthebuildertx great, thank you !
Молодец
I am curious. What part of the Houston Clear Lake area is your shop? I recognized the contractor section of the local Citizen newspaper.
North of Clear Lake near the bay.
Çok güzel
👍👍
has anyone mentioned the Rent-A Spouse ad in the newspaper around 2:05??
Haha. Catchy name for a handyman service.
What kind of flattening bit did you use? How many flutes? Thanks
I use this one: geni.us/0ibEA25
Envía a distintos países
Precio cuanto cuesta algo así
احمد السيلاوي من العراق متابع