Yeah man, gotta have space to clean the unit, work on it, blow the leaves out from behind it. This SHOULD be common sense. I'm not an HVAC technician at all. Just simple logic tells you not to slam it up against the wall.
I installed two mini-splits in my mobile home. One in the bedroom an one in the living room. In both cases I ran the AC lines sets through the floors instead of going out the outside wall. I ran dedicated electric wiring to each unit so each mini-split was on it's own circuit. They have both been running great so far.
Man That's great to hear. I'm glad they're working well for you. I just can't stand the look of a line set running down the side of a wall. It just looks cheap and DIY to me. I think you made a good decision man.
Nice install. I've seen several RUclipsrs do the installs, but hiding the lines is going the extra mile to re-sell value if it ever comes to it. Looks great.
Thanks man. Yeah I just wanted it to look as nice and neat as possible. Extra steps? Yes. But worth it in my opinion. Thanks for checking out the video.
This is great, and looks much better. But that's only because you know how to do drywall work. I know what needs to be done but I don't think I'd be good enough to do the mud work and sanding, and not have it show afterwards. We like mini split systems, but many of our boiler customers just don't want to spend the extra for AC also. So they either have a few window units or they go without. Here in the UP of Michigan, our summers used to be tolerable, not so much in the last 5 years though.
Interesting perspective, thanks for sharing. I am in the hot humid south, we are cooling 8 months out of the year typically so mini splits have become incredibly popular here in the last decade. With that in mind, I have seen so many bad installs with horrible lineset placement. I get where you are coming from on the drywall work side of things, but there is always the option of calling in a sub to close it back in and do the drywall work for you. Either way, I think you will agree, concealed linesets are so much more attractive, its worth the trade off in my opinion.
They really have these systems figured out. Helped a friend set 2 for his smallish 2 story home. The biggest pain is attaching linesets behind the cassette, they give you a 3x5 hole to make the connections. Fat fingers not apply lol. Unfortunately my friend's cheaper off-brand's units insulation wrap, is not uv stable in the deep south...it falls apart after about a year. Am sure Mitsubishi uses better materials. Open end torque wrench, and and the spin flare is not something a diy'er will have. We used 3 clicks of the elbow for torque specs ,or common sense. After working behind other people's shoddy work in remodals,it's always a pleasure to open up your own walls ...and see that craftsmanship is still rewarded years later! I give it two AA's !
Yes they do! Not sure they make one that size, but you could always buy one from Diamond Kote and then use vinyl siding around it. Nothing wrong with that I have seen it before. The lineset cover is from Mitsubish and I purchased it on ecomforts website.
everything was perfect im just worried about the condensing unit getting snow on and around it and not allowing the air to flow definitely recommend the diverstech mini split stand ms1201 to resolve that
No it's not a passive house. My energy bills are extremely low though, I'm comfortable in the home, and I actually have a chance to pay the home off in this lifetime. I don't understand the second part of your question.
12k Unit. Very happy so far. At first I was surprised at how long it took to cool the space. But after testing a few times in this brutal southern heat, its dropping the humidity in the space from the upper 70% range to low 40% in 30 minutes. That to me is impressive. I am very pleased. Running it today actually.
Clean and good looking install. I heard that Mitsubishi offers a 12 year warranty if a qualified tech does the install. maybe 10 years for a non-qualified tech.
It's doing very well, but I agree, I wish I had gone 18k. I tested the unit on the hottest day we had this year, real temperature 100 degrees, heat index over 120. Within 30 minutes the humidity was around the 50% mark. It removes the humidity incredibly fast. But temperature only dropped a few degrees. If the unit is left on for a few hours, it's perfect. But if I want to go out and work on something quickly in the garage, it's frustrating having to wait for it. I sized it properly so that it wouldn't short cycle, but in this circumstance I wish I had over sized it. Something I'm so against typically lol 😂
How do I find someone like Aaron? Did he charge you by the hour? The commercial bids on these mini-splits will quote the equipment price at about 1.5x the eComfort price, then double that amount for the total install. So if you can buy the equipment for $5000 from eComfort, the installed price will be $15,000. I'd happily pay a guy like Aaron $250 per hour, but how do I find him?
Nice to see a generous space between the outdoor unit and the wall.
Yeah man, gotta have space to clean the unit, work on it, blow the leaves out from behind it. This SHOULD be common sense. I'm not an HVAC technician at all. Just simple logic tells you not to slam it up against the wall.
I really enjoyed this video. Such a nice installation without using a line set chase running up the outside of the house.
Glad you enjoyed it! Thanks for tuning in!
I installed two mini-splits in my mobile home. One in the bedroom an one in the living room. In both cases I ran the AC lines sets through the floors instead of going out the outside wall. I ran dedicated electric wiring to each unit so each mini-split was on it's own circuit. They have both been running great so far.
Man That's great to hear. I'm glad they're working well for you. I just can't stand the look of a line set running down the side of a wall. It just looks cheap and DIY to me. I think you made a good decision man.
Nice install. I've seen several RUclipsrs do the installs, but hiding the lines is going the extra mile to re-sell value if it ever comes to it. Looks great.
Thanks man. Yeah I just wanted it to look as nice and neat as possible. Extra steps? Yes. But worth it in my opinion. Thanks for checking out the video.
This is great, and looks much better. But that's only because you know how to do drywall work. I know what needs to be done but I don't think I'd be good enough to do the mud work and sanding, and not have it show afterwards. We like mini split systems, but many of our boiler customers just don't want to spend the extra for AC also. So they either have a few window units or they go without. Here in the UP of Michigan, our summers used to be tolerable, not so much in the last 5 years though.
Interesting perspective, thanks for sharing. I am in the hot humid south, we are cooling 8 months out of the year typically so mini splits have become incredibly popular here in the last decade. With that in mind, I have seen so many bad installs with horrible lineset placement. I get where you are coming from on the drywall work side of things, but there is always the option of calling in a sub to close it back in and do the drywall work for you. Either way, I think you will agree, concealed linesets are so much more attractive, its worth the trade off in my opinion.
They really have these systems figured out.
Helped a friend set 2 for his smallish 2 story home.
The biggest pain is attaching linesets behind the cassette, they give you a 3x5 hole to make the connections.
Fat fingers not apply lol.
Unfortunately my friend's cheaper off-brand's units insulation wrap, is not uv stable in the deep south...it falls apart after about a year.
Am sure Mitsubishi uses better materials.
Open end torque wrench, and and the spin flare is not something a diy'er will have.
We used 3 clicks of the elbow for torque specs ,or common sense.
After working behind other people's shoddy work in remodals,it's always a pleasure to open up your own walls ...and see that craftsmanship is still rewarded years later!
I give it two AA's !
Thanks chip! Really appreciate it man. Your definitely right about the fat fingers, I have the same issues! Thanks for checking out the video buddy.
So…I said “thumb screws” … but I meant “thumb caps” lol. 33:42
@@OwensandCompany us common folk won't know the difference 😂
do they make a mount like that for vinyl siding, also what was the boot you used outside for the lineset?
Yes they do! Not sure they make one that size, but you could always buy one from Diamond Kote and then use vinyl siding around it. Nothing wrong with that I have seen it before. The lineset cover is from Mitsubish and I purchased it on ecomforts website.
It looks fantastic, but that black insulation between the house and the condenser you should wrap or it will turn to dust.
@@Rabitt240mph yep. Need to install an Airex Titan
what happens when you drill new shelves (or whatever else) and puncture the refrigerant lines buried in the wall?
Your going to hang shelves from the drywall? Interesting.....
What is the lineset cover wher it exits the structure?
That cover is made by Mitsubishi and I purchased it from ecomfort.com
everything was perfect im just worried about the condensing unit getting snow on and around it and not allowing the air to flow definitely recommend the diverstech mini split stand ms1201 to resolve that
I had to ask is your garage and house built as a passive house design, and when you mention the name of that installation?
No it's not a passive house. My energy bills are extremely low though, I'm comfortable in the home, and I actually have a chance to pay the home off in this lifetime. I don't understand the second part of your question.
@@miillersconstruction oh the second part was just about the insulation
@@bradhaughton6698 what about the insulation would you like to know?
What size unit? Happy so far?
12k Unit. Very happy so far. At first I was surprised at how long it took to cool the space. But after testing a few times in this brutal southern heat, its dropping the humidity in the space from the upper 70% range to low 40% in 30 minutes. That to me is impressive. I am very pleased. Running it today actually.
@@miillersconstruction Excellent. Thanks for the info and the comprehensive video. Will be doing similar unit here in our Nashville humidity. :)
Thats what she said
Clean and good looking install. I heard that Mitsubishi offers a 12 year warranty if a qualified tech does the install. maybe 10 years for a non-qualified tech.
@@bobnomura2068 yeah I'm not sure on that one honestly.
Did I miss him applying a vacuum pump to evacuate the nitrogen and any moisture in the line?
Looks like I forgot to add that part to the video. I filmed it. But I'm not sure why I didn't include it. We vacuumed the lines for over an hour.
I believe I would’ve went 18’000 btu, I hope it’s doing good
It's doing very well, but I agree, I wish I had gone 18k. I tested the unit on the hottest day we had this year, real temperature 100 degrees, heat index over 120. Within 30 minutes the humidity was around the 50% mark. It removes the humidity incredibly fast. But temperature only dropped a few degrees. If the unit is left on for a few hours, it's perfect. But if I want to go out and work on something quickly in the garage, it's frustrating having to wait for it. I sized it properly so that it wouldn't short cycle, but in this circumstance I wish I had over sized it. Something I'm so against typically lol 😂
Miler legendo.
How do I find someone like Aaron? Did he charge you by the hour? The commercial bids on these mini-splits will quote the equipment price at about 1.5x the eComfort price, then double that amount for the total install. So if you can buy the equipment for $5000 from eComfort, the installed price will be $15,000. I'd happily pay a guy like Aaron $250 per hour, but how do I find him?
you need rubber feet for the outside unit for several reasons
Delete those wall outlets because those mini split boards don’t like voltage imbalances and they burn real fast. I learned that the hard way
Use line hide, saves a lot of nonsense work. Now, if you ever have issues, you gotta cut the wall open and get to it.
@@stevek.1979 issues like a random hole in the middle of the line set??? Really?
@@miillersconstructionexactly, if you can hide the line in the wall and still access your joints it’s a much cleaner install.
So when it takes a crap ,OWN IT
Ok?