Hi Josh firstly i hope David is making a good recovery with no lasting damage to his hand .it was really great to see you in the wining position you certainly deserve it for all the late nights and attention to detail you put into the truck. You are so right in your philosophy the prep you do at the shop before any competition ( apart from breaking something ) is the difference between coming first and losing that prize money 💰 I'm glad all went well As always take care stay safe and God bless 🙋♂️🇬🇧
Congratulations on the win! That wasn't a cake walk, but you were definitely prepared! The 07 is a beast of a truck! You are doing the sponsors proud. Diesel motorsports is super competitive no matter if it's drag racing, dyno or sled pulling. Do they have any dirt drag racing close to you? That was fun to watch you compete in that.
Awesome hook man! Can't wait till you come around the augusta county, rockingham county va area. These boys need to see what a real badass truck actually is! Only thing we have around this area is the dmax of cody teter's you pulled with in orange.
Great event and that track was slick. It looked like an ice rink on your run at the end. I'm sure you would have gone further if it weren't for that,but congrats on the win man. Definitely appreciate/respect your drive/determination.
Awesome job. I can promise you the most dangerous part of that weekend is not on the sled track. Ask all the steam guys about the boiler operator's certs they have to have for that old stuff.
I've wanted to got to the steam crusher event for the past few years. How do you find out about these types of events? I always hear about them afterwards.
Them aluminum shafts are not good with a lot of torque is what I heard. I have a 5" aluminum onepwice I replaced my twopeice stock unit, center carriers are junk when u drive dirt roads all the time.
Josh need some 68 work done can you point me in the right direction, I been trying to get ahold of u bout that pump. I don't have a ig or fb I emailed the WOT page. Do you have another source of communication?
Congrats on taking home the W! You sure sprayed the house down and those street fighters took it without complaining.
Hi Josh firstly i hope David is making a good recovery with no lasting damage to his hand .it was really great to see you in the wining position you certainly deserve it for all the late nights and attention to detail you put into the truck. You are so right in your philosophy the prep you do at the shop before any competition ( apart from breaking something ) is the difference between coming first and losing that prize money 💰
I'm glad all went well
As always take care stay safe and God bless 🙋♂️🇬🇧
Hell yeah ! Congratulations Josh 🙌🏻
I bet it was a cool time !
You know what makes your channel great? You stay so damn humble! Nice video!! Glad you had an awesome weekend!!!!
Congrats Josh, Dave and everyone involved!! Glad Dave is not badly hurt and recovering, Cheers!!!!
HELL YEAH JOSH. SO GOOD TO SEE IT COME TOGETHER. BIG POWER.
SAWEEEET!!!! Congrats!! Bad Ass indeed. Love that White Mega though; just like my '06 but with a... ehem... "little more juice" than mine...
Heck ya Josh that was awesome, well done sir!
We have a 1930 steel wheeled Farmall Regular, yes we like the “old” tractors.
Hell ya!!!
I love tractor pulls always have enjoy it now while your young
Hell Yea!!! Good job on the Win!!! That intake horn doin work!! Keep it up
You looked like you could have pulled that sled all the way back to Virginia if you wanted to! That '07 is unstoppable.
Low side of transfer case, overdrive, 3.73 and 6000rpm is 84mph wheel speed!
What amazed me was how clean burning your setup is
I was thinking same thing. These other guys were really smoking, but Josh was super clean. He really knows his tuning now. Awesome job!!!!!
Nitrous
It’s that clean fuel only as well, good tuning, good injectors, goes a long way
Congratulations Josh!
Congratulations on the win! That wasn't a cake walk, but you were definitely prepared! The 07 is a beast of a truck! You are doing the sponsors proud. Diesel motorsports is super competitive no matter if it's drag racing, dyno or sled pulling. Do they have any dirt drag racing close to you? That was fun to watch you compete in that.
Yes trying to find more events
I'm happy to hear you guys are staying busy.
Awesome job. Great video!
Awesome hook man! Can't wait till you come around the augusta county, rockingham county va area. These boys need to see what a real badass truck actually is! Only thing we have around this area is the dmax of cody teter's you pulled with in orange.
Ya lucky for him my driveshaft broke 😆
Lots of fun to be had at events like this. 👍😀
Great job man she’s a heck of a truck!
Hell Yeah Brother 🇺🇸🦅
I swear I heard a shift halfway through that pull like you were heading onto the highway with that sled!
Guess I should have watched until the end before my original comment. Damn son!
No worries
Hell yeah Josh! Congratulations! I think I know where the engine came from…
Hell of a pull josh!!! Congrats!!
Hell of a pull man. Congrats
1st place??Hell yeah! And no broken parts!!!
Great scenery as usual
Great event and that track was slick. It looked like an ice rink on your run at the end. I'm sure you would have gone further if it weren't for that,but congrats on the win man. Definitely appreciate/respect your drive/determination.
Yeah I didn’t think anyone was going to do good when I saw the skid steer pushing water and mud to the end of the track
Little sketchy down there for sure
ANY RACING SLOW IS SMOOTH, SMOOTH IS FAST. IT ALWAYS LOOKS EASY WHEN IT WORK SOO GOOD.
Saturday September 3rd Stoutsville, Oh Central ohio truck pull circuit has an 8000lb 26" hitch run what ya brung class.
Awesome job. I can promise you the most dangerous part of that weekend is not on the sled track. Ask all the steam guys about the boiler operator's certs they have to have for that old stuff.
Didn’t even think about that but valid point! We missed you this weekend!
@@horsetorquesdiesel Keep kickin' ass brother. You're an ace.
Forgive me for not knowing but… on the old tractors.., what’s up with the big rubber band?
Great job man you deserve it bud
6000 rpms has to sound awesome be cool to hear it in person
Hell yeah! Congrats! Side note with the new shop any talks about getting a dyno? Just curious
Maybe one day
Good job 👍
You need any techs over there? lol looking to move to the east side of the states
great work man
Joshua is my hero 😍
Looks like you were taking the sled home with you
Are stock Alison’s transmission able to have custom tuning done to it
Awesome job! :)
Hey question on a 48 RE best stall rpm for under 600 horse rwhp and daily towing heavy trailers. Thanx.
Hell yeah....First Place. 🏆
Hey, do you recommend making a locked 2-3 shift while sled pulling or a unlocked 2-3 shift? Fmvb 48re all billet shafts.
Locked 2-3
I've wanted to got to the steam crusher event for the past few years. How do you find out about these types of events? I always hear about them afterwards.
Facebook is how I saw it
Can you do a "Best parts from a 48RE" that would benefit 47RH/RE guys in your next trans build video? Just a thought.
Congrats, smoked it
This Saturday Perry County Ohio(New Lexington) 8000 rwyb class
I thought your truck would have caught another gear mid track
Hey always wondered does that truck have 3.73. Or 3.55 I wanna swap my fummins but wanna do it once lol
3.73 for the win!
@@horsetorquesdiesel awesome thanks!
Biggggggggg sled puller guy now 😎😎
I’ve always liked pulling, just no pulling where I used to live, only dynos 😂
@@horsetorquesdiesel I didn’t math the wheel speed but it was certainly all of it. Good job, looking forward to more of it.
i think the shop needs a 3.0 truck...
Second pull of the video is what a proper fuel air mixture should look like these ignorant dudes dumping coal just dont know any better
Them aluminum shafts are not good with a lot of torque is what I heard. I have a 5" aluminum onepwice I replaced my twopeice stock unit, center carriers are junk when u drive dirt roads all the time.
3.73, 6000 rpm, 33 inch tire, and .69:1 OD ratio says 228 MPH in a gearing calculator but I dont know if i buy that it sounds ridiculous
4wd low.
If I done the math correctly it’s 88mph wheel speed in 4 low.
Josh need some 68 work done can you point me in the right direction, I been trying to get ahold of u bout that pump. I don't have a ig or fb I emailed the WOT page. Do you have another source of communication?
And congrats on the pull
I apologize, re-email me, I’ll get you squared away, my new phone wiped the mail box!!!!
No worries at all bro I'll shoot you a email later today