Here in Kentucky we don’t have gates on our tracks lol 😂boys here would run right through em yeah that dangerous as hell I can’t wait to do my first pull but good job guys
Awesome content as always! Congrats on the sweep and going 1 and 2. Speaks volumes about your shop. Love the attitude and willingness to help new pullers. That is truly what it is about. That engine/ transmission has performed like a beast. It does run super clean that is very impressive for that power level.
You should do a sled pulling video going over how to set up a street truck for pulling. The difference between auto and manual pulling and just some info for someone wanting to try it out for the first time and also safety stuff for the driveline does and donts.
I’ve got to say, I have followed a lot of diesel channels over the years, and this one has steadily become my favorite, especially as other guys have gone to giveaways and gotten away from why they started their channels in the first place. I’ve followed ever since you started doing a lot of RUclips with the ‘05. Being a Utah guy, it was fun to see a local guy go out and do everything I want to do with a truck in the future. I enjoy the how-tos and technical explanations, especially on the high-horsepower stuff. I sold my truck last year to finish school, but I have every intention of putting some of this new knowledge to the test when I have the time and money to buy another third-Gen. Best wishes and PLEASE keep this kind of content coming!
Truck Fest in the Valley 2k22 September 16th and 17th at Lebanon Valley Speedway in New York. Little more than 4 hours from you but they have, truck pulls, dyno, drag racing and a truck show. I believe Smoke&Speed are the ones putting it on/big part of it. Be cool to see you compete there, hopefully its far enough out you could plan for making it.
One more awesome job you guys you are rapidly becoming the truck to beet its great to see Dave back in action his truck looks amazing and sounds great I'm rapidly becoming a fan of sled pulling i have always been into drag racing i actually understand we're your coming from when you say pulling is a lot less stressful than drag racing it seems to be a totally different crowd of people ( certainly more friendly and a more relaxed atmosphere ) One again nice to see Dave back in action 👍 As always take care stay safe and God bless you both 🙋♂️🇬🇧
I loving the sled pulling content! It’s really cool to see you put some consistent content out! Keep up the hard work and I can’t wait for next videos!
u-joints and driveshafts are dangerous for bystanders. In the cab you are very safe. Clutches and flywheels are what to be scared of in the cab, or of a block explosion. You are spot on on those pull truck power levels.
Beans diesel blackout in the country event in Woodbury, Tn. October 15th, dirt drags, dyno, burnout contest and sled pulls to end the night. Awesome event.
I liked the in-cab footage the way it was, nice to see the driver and cab setup that I think would be a bit lacking with a front mounted camera. I have an H pump project I'd like to get going, collecting parts at this point, everything is second hand, do what I can to make stuff hold together! be a while before it's going though
I love this shit. Just getting into sled pulling with my lml. Working on build now truck is currenty 750hp building it for 1000hp to start. I am confused about stator options for pulling any recommendations would be great. Great vid thanks man.
Damn Josh, you got that setup dialed pard!!! Being on the left coast I have only ever been to one pull that was in my home town and only notice the obvious differences in classes clear or black exhaust, weight hung or boxes, street vs dedicated puller, and the very little I've learned from your videos or other pullin channels. Seems like the rules could be very confusing and in depth but that might be my pea brain. As you know I'm one for "great inexpensive" suggestion............ if you had a spare couple hundred thousand dollars lyin around, you'd look smashin piloting a pro stock smoker tractor which would also provide more amazing content 🤣🤣🤣🤣🤣🤣🤣🤣.........oh and in all your extra spare time too lmfao!
Awesome couple of pulls! Really looking forward to see the tear down of that motor. Do you post your schedule? We'd love to come see y'all pull sometime.
If anyone is interested in someone that advocates safety, watch some videos by Lyle Barnett! He's the guy Josh is mentioning in the video that had his visor up.
Josh Congratulations! I am glad Dave is better and got to pull. I was wondering who does your tuning because your truck is super clean compared to my 2006 mega cab with compounds and 125hp injectors on EFI Live. Once again Congratulations to you and Dave.
Not being ignorant but who in their right mind builds a pulling track and puts a fence like that lol if nothing else atleast have it open into the parkinglot❤❤❤
Loving the sled pulling content, I'm hoping to get into it with my truck next year
It's a slippery slope once you start, a lot of fun though
That view of the exhaust is great. It's good to see a truck ran that clean and win.
Sled pulls are the greatest. Love the on board camera views
Here in Kentucky we don’t have gates on our tracks lol 😂boys here would run right through em yeah that dangerous as hell I can’t wait to do my first pull but good job guys
Great footage all around. Your truck is killer, nice job bud!
Awesome content as always! Congrats on the sweep and going 1 and 2. Speaks volumes about your shop. Love the attitude and willingness to help new pullers. That is truly what it is about. That engine/ transmission has performed like a beast. It does run super clean that is very impressive for that power level.
Excellent pull! Ill be doing my first pull the middle of august and I can’t wait!!
You should do a sled pulling video going over how to set up a street truck for pulling. The difference between auto and manual pulling and just some info for someone wanting to try it out for the first time and also safety stuff for the driveline does and donts.
I’ve got to say, I have followed a lot of diesel channels over the years, and this one has steadily become my favorite, especially as other guys have gone to giveaways and gotten away from why they started their channels in the first place. I’ve followed ever since you started doing a lot of RUclips with the ‘05. Being a Utah guy, it was fun to see a local guy go out and do everything I want to do with a truck in the future.
I enjoy the how-tos and technical explanations, especially on the high-horsepower stuff. I sold my truck last year to finish school, but I have every intention of putting some of this new knowledge to the test when I have the time and money to buy another third-Gen. Best wishes and PLEASE keep this kind of content coming!
Truck Fest in the Valley 2k22 September 16th and 17th at Lebanon Valley Speedway in New York. Little more than 4 hours from you but they have, truck pulls, dyno, drag racing and a truck show. I believe Smoke&Speed are the ones putting it on/big part of it. Be cool to see you compete there, hopefully its far enough out you could plan for making it.
Bro! Love how clean your exhaust is going down the strip! Good work!
One more awesome job you guys you are rapidly becoming the truck to beet its great to see Dave back in action his truck looks amazing and sounds great I'm rapidly becoming a fan of sled pulling i have always been into drag racing i actually understand we're your coming from when you say pulling is a lot less stressful than drag racing it seems to be a totally different crowd of people
( certainly more friendly and a more relaxed atmosphere )
One again nice to see Dave back in action 👍
As always take care stay safe and God bless you both 🙋♂️🇬🇧
Great Job Josh!
Awesome bro!!👍🏼👍🏼Congratulations!!…Aloha🤙🏽
The view in cab was cool looked like steering gets real light
Love that you had multiple angles of video
I loving the sled pulling content! It’s really cool to see you put some consistent content out! Keep up the hard work and I can’t wait for next videos!
u-joints and driveshafts are dangerous for bystanders. In the cab you are very safe. Clutches and flywheels are what to be scared of in the cab, or of a block explosion. You are spot on on those pull truck power levels.
Open the gate!
Sounds great buddy.
Thanks for all the tips and advice. I really enjoy every one of your videos.
That's awesome, 2 wins!!!!! 👍
Dude you’re killing it. Congratulations on your wins. Long hours, dedication and hard work always pays off. 🙌
Awsome job behind the wheel trucks pulled awsome congrats stay passionate keep on getting after it.
On a good streak bro!! Good to see Dave back in the game!
Well done and congratulations
Absolutely bad ass Josh 😈💪🏻👍🏻
Hell Yeah Brother 🇺🇸🦅
Josh, love the views! You all just know how to make it work! You don’t have to explain why you won! 😜 you are part of the motor! Roll out!
OBVIOUSLY THE TRUCK IS WORKING SO DONT CHANGE A THING. GREAT JOB.
After seeing the skin melted off Bocka's ( sp?) arm, it was a real testament to never skimp on fire safety. Especially whenever NO2 is on bord.
Congratulations! Nicely done! Both of you.
Man I’m lovin this channel! Keep up the hard work!
Hell yeah brother. Dude I thought you were gonna smash thru that fence on the in cab view lol.
Beans diesel blackout in the country event in Woodbury, Tn. October 15th, dirt drags, dyno, burnout contest and sled pulls to end the night. Awesome event.
Trying to make that one for sure
Ya buddy your doing great bud love the content an keep up the great videos love them
They gonna start hateing on you back east there if you keep winning!!! Congrats on the wins!!!
Love the video !!
I liked the in-cab footage the way it was, nice to see the driver and cab setup that I think would be a bit lacking with a front mounted camera.
I have an H pump project I'd like to get going, collecting parts at this point, everything is second hand, do what I can to make stuff hold together! be a while before it's going though
It's amazing how clean(smoke wise) his truck is compared to all the others
That’s what a healthy shot of nitrous will do.
Your invited to the Spokane fair pulls told me to tell ya last year when you were in Utah now it’s definitely not worth the drive but your invited 😂😂
Y’all did good brother 👍💪🏻
I love this shit. Just getting into sled pulling with my lml. Working on build now truck is currenty 750hp building it for 1000hp to start. I am confused about stator options for pulling any recommendations would be great. Great vid thanks man.
Damn Josh, you got that setup dialed pard!!! Being on the left coast I have only ever been to one pull that was in my home town and only notice the obvious differences in classes clear or black exhaust, weight hung or boxes, street vs dedicated puller, and the very little I've learned from your videos or other pullin channels. Seems like the rules could be very confusing and in depth but that might be my pea brain. As you know I'm one for "great inexpensive" suggestion............ if you had a spare couple hundred thousand dollars lyin around, you'd look smashin piloting a pro stock smoker tractor which would also provide more amazing content 🤣🤣🤣🤣🤣🤣🤣🤣.........oh and in all your extra spare time too lmfao!
Awesome couple of pulls! Really looking forward to see the tear down of that motor. Do you post your schedule? We'd love to come see y'all pull sometime.
It’s usually last minute but Ill be at SDX
Awesome win🦾
Hell yeah killer content
Turbo charged 73 Ford's are something to see I tell you they by far have the most power output
Hit up “Skippy” Richard Wilkerson he’s very familiar with the pulls all around Va. He has a great running duramax.
If anyone is interested in someone that advocates safety, watch some videos by Lyle Barnett! He's the guy Josh is mentioning in the video that had his visor up.
Your truck has a truly unique sound....sounds like a jet. Is this the blueish greenish kinda turquoise painted engine?
Yeah it’s called tickle me teal 😂
Josh Congratulations! I am glad Dave is better and got to pull. I was wondering who does your tuning because your truck is super clean compared to my 2006 mega cab with compounds and 125hp injectors on EFI Live. Once again Congratulations to you and Dave.
Who does your tuning? i had a 04.5 CR with 150% overs that ran clean like that once in boost. That was on Smarty UDC tuning from silver bullet.
I tune the truck
Kendrick putting the 68rfe to the test
Facts!
Why dave truck sounds so mechanical? Camshaft, pump...? Nice video and Greetings from Brasil
His is a full on race truck with different fueling and turbos
Are you going to Scheid diesel extravaganza at Wagler‘s at the end of August?
Yes I am!
Josh, what if you jacked the wheels off the ground and fast spun the wheels to clear the treads? Great video!
Not a bad idea!
How ya liking being back east so far josh.? Better than utah or what.?
Not being ignorant but who in their right mind builds a pulling track and puts a fence like that lol if nothing else atleast have it open into the parkinglot❤❤❤
@GregAlberella you should prolly just build another sled truck and show these guys how it’s done
😂 anytime he wants to throw down he has my number
This was literally just to get him to do it haha we all want him too
Even Michael says it in the videos all the time
I’ve seen a truck run through that fence at a pull years ago.
Haha that’s my 7710 I got second in the big farm class
It was a good looking tractor! Congrats!
Do you have a list of where you will be pulling and or racing . I would like to come watch
It’s really last minute our next event is SDX
THE IN CAB FOOTAGE LOOKS ROWDY. SOUNDS LIKE A JET ENGINE.
👍💪
Greene county fair sled pull
Great job . I'm curious are you happy with the trucks setup? Do you have plans to change anything?
Not really until the motor spits it’s guts out
How am i not hearing about these (local to me) sled pull events dammit! I want to go!!!!☹️ i need a heads up. How do i hear about these in advance?!
People message me like the day before 😂
@@horsetorquesdiesel well son of Bitch. Ill just have to start going to every county fair in hopes there some sled pullin going on hahaha
If you don’t mind me asking do you leave in third with your fmvb setup?
1st
Will you be at beans diesel event in October? Or is that going to be KOS grind time?
Should be!
@@horsetorquesdiesel be cool to see you there, keep up the great work as always.
Are you going to armada Michigan august 20th?
Probably not. Little far
thats a really imprepssive setup you have there. Have you ever tried a rip at the 1/4 mile? I would be curious to see what it would do.
6.18 in the 1/8th fuel only
I think you said you ran 33” truxus, why not run 35’s
What turbo is on that engine right now?
480/gt55
Wats the name of ur new shop looking for parts in va
WOT Motorsports
Thanks and ur videos of that truck a bad ass
Was the heat, because it ran so lean ?
1450 first pull
1610 second pull
Do you still have the D&J Enforcer?
No I sold it
Where's the diesel Ford's
Probably broken in the garage
Hi Do you need some great free lighting for your car to help you better driving, off-road. we're looking for sponsorship!
I already use y’all’s stuff