the 2.4 DOES uses a Z endstop, they just call it Z probe. the inductive probe (like klicky with a basic confic) is just used to level the Gantry and to create a bed mesh. you still always home Z on the z-Probe and set your nozzle offset on a reference point on the bed. you can get around it, but i would consider this advanced.
Cool Video. Can't help but notice thought that the Formbot Kit I am looking at purchasing is already quite changed to the one you built. It is advertised on the Website with Manta M8P and Can Daughter boards EBB SB2209 CAN /EBB SB00000 CAN and a VORON TAP Variation. So might be great if you still have it to post the BOM your kit came as a comment perhaps so that your tips and tricks are easier to apply to newer kits.
1:43 no no no !!! you should not remove the slides like that, there is a huge risk of losing balls, it is not for nothing that the manufacturers place plastics of the same shape as the slides...
have you ever taken any of them off? i assume you havent. the plastic part included is specifically for insertion. taking them out is no biggie. they have a small metal clip holding them inside.
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
what's with the stack of cash on 1:11?, hahhahhaahah
This video is amazing!
the 2.4 DOES uses a Z endstop, they just call it Z probe. the inductive probe (like klicky with a basic confic) is just used to level the Gantry and to create a bed mesh.
you still always home Z on the z-Probe and set your nozzle offset on a reference point on the bed. you can get around it, but i would consider this advanced.
Tools from 1,5mm to 3mm in 5 mm increments? How does that work
I meant 0.5MM, my mistake!
Cool Video. Can't help but notice thought that the Formbot Kit I am looking at purchasing is already quite changed to the one you built. It is advertised on the Website with Manta M8P and Can Daughter boards EBB SB2209 CAN /EBB SB00000 CAN and a VORON TAP Variation. So might be great if you still have it to post the BOM your kit came as a comment perhaps so that your tips and tricks are easier to apply to newer kits.
i like voron tap way more than clicky
Voron Tap is a great alternative!
How does it compare to the SOVOL SV08?
Voron may be more for people interested in 3D-printers, and Sovol more for people interested in 3D-printing
Cześć, fajny film. Też buduje Vorona 2.4 R2 na moim polskim kanale. Jeśli masz ochotę zerknij.
1:43 no no no !!! you should not remove the slides like that, there is a huge risk of losing balls, it is not for nothing that the manufacturers place plastics of the same shape as the slides...
have you ever taken any of them off?
i assume you havent.
the plastic part included is specifically for insertion. taking them out is no biggie.
they have a small metal clip holding them inside.
@@contomo5710 I am an electromechanic...
Step 1: Buy Sovol SV08
Not a voron
@@jonathanwang1556 Did you even check it?
@@jonathanwang1556 Did you even check it out?
Seems like a great printer. I will check it out!
please no... except someone has budget difficulties