If anyone is having this issue after doing a Windows upgrade, the solution (at least in my case) was going into the command prompt and entering the following: diskpart > list disk > list volume > take note of the letters of the drives > dir c:/ you're looking for the drive with windows and program files on it, if it's not in drive c enter the same command but with the other drive letters you took note of in the previous step. Once you've verfied the drive that contains windows and programs, take note of the drive size ex: 1TB, 500GB, ect. Next step is to turn off your computer and press the key that gets you into your BIOS/UEFI (in my case it was f2 but will vary depending on your motherboard), once in your BIOS/UEFI go to the boot tab then boot option 1 and change that to the drive that contained windows and programs based off of the size you took note of. In my case my Windows 10 was installed on a 256GB nvme but after upgrading for some reason it installed Windows 11 on my 1TB nvme and my boot option 1 was still set to my 256GB nvme. Hope this helps someone
Michael, thank you so much for the information, my problem was exactly the same, a windows update changed the order of the boot options. I struggled for hours from the command window trying to solve it, and you gave me a 2 minutes solution. Thanks a lot.
Everything was going well I assigned successfully drive letter v, after exit, leaving diskpart, then typing \source>v: Access is denied. So what is the next step to proceed ?
Hello, I have done all process that you have told in this vedio,but my problem is still remain same getting blue screen again, what should I do without loose my installed software which is very important for me. Please suggest me with other options without loosing any. Thank you
The 4th fix almost worked for me - up to c:\boor\bcd -h -r -s "path not found". I notice that in the command prompt window "X: \" appears rather than "X:\windows\system32\cmd.exe2 although that DOES appear at the very top of the window in the outer😩 box. I'm lost 😢 Please help
Wait, excuseme. In the last cmd tutorial, "attrib c:\boot\bcd -h -r -s", mine response is "Path not found - C:\boot" could you please Sir, figure it out why?
This is really knowledgable vedio ...its too helpful vedio ...i liked and subscribed .... Why because nobody will give so much information simply ....am sure this has helped so many and helping too 😊
I am trying to install windows 11 on my spiffy new laptop. For some reason, after tinkering with Diskpart, by making the SSD the PRIMARY drive, i lost the drive! It is NOT in diskpart! I cannot find it! On the Win11 installation flash drive i created, when doing shift+F10,, command prompt comes up! the X: drive IS the missing SSD!! It is a 512MB SSD drive. How can i get the drive to show up in Diskpart??!?!?!?!? Also, the SSD is in MBR format right now. In order to install Windows 11, i need it to be in GPT format. Please help!
I was with you till more than halfway on the 3rd one than i was not getting the same thing you were i was getting access denied and path incorrect so after working on this for 10 hrs and did not even realize it was New Years Eve I am still stuck I think cuz it is Asus and it may have its own little get up but i tried :( thank you
In the last solution , it was ok until I typed attrib c:\boot\bcd -h -r -s When I typed this I get error “path not found - c:\boot What can I do for this ? None of other solutions are not working for me
In 3rd Salution while commanding md \efi\microsoft\boot\ has no response on these in my pc but I further trying to proceed... I got my pc problem while opening different chrome a/c in my computer suddenly my operating system got lack and my computer given me QR code that I had taken picture of that but I am continue trying to open my operating system that I didn't get ..please help me 😭
After the can mine said it found corrupted files and fixed it but when I reboot it still didn’t boot up , the screen black with backlight and cursor spinning
Bootrec /fixmbr shows “A device which does not exist was specified “ chkdsk /f c: “The type of the file system is RAW. CHKDSK is not available for RAW drives.”
After the nT60 was successful , the bcdedit /export c:\bcdbackup. Failed This drive is locked by buttocks drive , you must unlock this drive from control panel
My PC isn't entering the advanced recovery environment...when i try, its interrupted by a black screen saying STOPCODE PROCESS1 INITIALIZATION FAILED and it restarts back to windows. I cant get it to the advanced recovery environment let alone safe mode, please help!
These steps still didnt help me with my tablet. When it starts up it looks like the internet browser or some message is about to show but it disappears quick. I dont know what to do.
10:55 while following this step bcdedit /export c:\bcdbackup I get error saying "This drive is locked by bitlocker drive encryption. You must unlock this drive from control panel" Now the problem I don't know bitlocker password, neither I can open control panel because my pc won't open its given blue screen saying unmountable drive
Hi, I tried your all the ways but still my system is not starting. Actually iwhen it was working that time I went to services. Msc and disabled the windows license manager and restart but it didn't get restart and problem starts from then.Can you please help me?
I can't reset my PC, I have done everything but it's not working. I have watched all the RUclips to find how to solve the problem, please can you help me ? My PC is Dell laptop and it's windows 10
After bootrec /fixboot it is showing access denied....
Please help🙏
Watch the it properly mate it tells you how
Hey try “bootsect/nt60 all” then do “bootrec /fixboot”
Then what@@cappablecannon1824
@@cappablecannon1824 thanks!
When do "bootsect/nt60 all"
Show the system cannot find the path specified
Please help
If anyone is having this issue after doing a Windows upgrade, the solution (at least in my case) was going into the command prompt and entering the following: diskpart > list disk > list volume > take note of the letters of the drives > dir c:/ you're looking for the drive with windows and program files on it, if it's not in drive c enter the same command but with the other drive letters you took note of in the previous step. Once you've verfied the drive that contains windows and programs, take note of the drive size ex: 1TB, 500GB, ect. Next step is to turn off your computer and press the key that gets you into your BIOS/UEFI (in my case it was f2 but will vary depending on your motherboard), once in your BIOS/UEFI go to the boot tab then boot option 1 and change that to the drive that contained windows and programs based off of the size you took note of. In my case my Windows 10 was installed on a 256GB nvme but after upgrading for some reason it installed Windows 11 on my 1TB nvme and my boot option 1 was still set to my 256GB nvme. Hope this helps someone
I think windows 10 having this issue in it's upgrade 🙁
Me too facing this issue after update !!
Sorry man, I dont understand
So how do I change to boot with option 2?
Cannot enter bios to do this
Michael, thank you so much for the information, my problem was exactly the same, a windows update changed the order of the boot options.
I struggled for hours from the command window trying to solve it, and you gave me a 2 minutes solution.
Thanks a lot.
Thank you for your video. It was my last try and you got me to the correct menu so I could resolve the issue. 😂
Well, done it all, no luck hoping anyone else with the issue gets by
did you get a new computer
THANK YOU SO MUCH BROTHER ITS WORKING!! IM NOT LYING IT'S WORKING..
i was 2 hours problaly more on doing this alone but you helped me in 5 min ty bro
I really think you for this with video I was trying a long time to solve this issue
The system cannot find the file specified at 7.53 and 4th method bootrec /fixmbr
How do you mean by hypan
I still hv the sam problm, but its due to low memory. Can u tell me how to delete som files. May b it work by creating more space
Lots of love. This guy saved me from getting whipped to death today😂😂😂
Everything was going well I assigned successfully drive letter v, after exit, leaving diskpart, then typing \source>v:
Access is denied. So what is the next step to proceed ?
I have the same problem did you find a solution?
This man save my life 😅
Thankyou.. I tried many many ways but with solution 2nd worked in my case thanks...
Thank you very very much i don't know how can i thank you you really save my life god bless you ❤❤❤❤
bro i almost cried for 1 hour ;'. but after this video finnaly it worked thx ❤❤❤
Thank you! The CHKDSK command fixed the problem for me.
how much time
@@gulshansinghrai don't remember, probably around 10 mins or more
Why my access is denied
when I put "attire c:\boot\bcd -h -r -s", it said "path not found - c:\boot"
Best of the best. Much appreciate your help, brotha!
7:46 it says access denied help
Me too 😢
check the 1st comment bro
Type: bootsect/nt60 sys
Then the bootrec /fixboot
Thank you! You are a life saver 🙏
Thank you man i love you so much, keep up the good work
Hello,
I have done all process that you have told in this vedio,but my problem is still remain same getting blue screen again, what should I do without loose my installed software which is very important for me. Please suggest me with other options without loosing any.
Thank you
After attrib c:\boot\bcd -h -r -s
it is showing path not found
In this case what I have to do can please tell for this case 😥
Same here
Did you ever found a solution?
@@telmarose4185same did you find a solution?
Step 1 worked. Thanks!
Wooahhhh thank u solution #1 works on me...thank u veryyyyyy much😢😊
I’m hitting esc and F11 but keeps putting me in restart loop. What other options do I have?
How to Create Windows 10 System Recovery Partition. ruclips.net/video/wUBTMkkKdaU/видео.html
The 4th fix almost worked for me - up to c:\boor\bcd -h -r -s "path not found". I notice that in the command prompt window "X: \" appears rather than "X:\windows\system32\cmd.exe2 although that DOES appear at the very top of the window in the outer😩 box. I'm lost 😢 Please help
Wait, excuseme. In the last cmd tutorial, "attrib c:\boot\bcd -h -r -s", mine response is "Path not found - C:\boot"
could you please Sir, figure it out why?
Same
Same😢
Same 😢
The system cannot find the path specified ? Erro
This is really knowledgable vedio ...its too helpful vedio ...i liked and subscribed .... Why because nobody will give so much information simply ....am sure this has helped so many and helping too 😊
Thank you so much 😀
4th method saved my life
THANK YOU!
How did you get past the “ atrrib “ step? Please & thank you I advance!!!
It's Woking 🥰. Thank you brother
Informative video, but no involvement in the comments when people need help...
I am trying to install windows 11 on my spiffy new laptop. For some reason, after tinkering with Diskpart, by making the SSD the PRIMARY drive, i lost the drive! It is NOT in diskpart! I cannot find it! On the Win11 installation flash drive i created, when doing shift+F10,, command prompt comes up! the X: drive IS the missing SSD!! It is a 512MB SSD drive. How can i get the drive to show up in Diskpart??!?!?!?!? Also, the SSD is in MBR format right now. In order to install Windows 11, i need it to be in GPT format. Please help!
attrib c:\boot\bcd -h -r -s. It says patch not found -c:\boot 😢
Was any solution?
@@Boso917200 bro reset pc.
I was with you till more than halfway on the 3rd one than i was not getting the same thing you were i was getting access denied and path incorrect so after working on this for 10 hrs and did not even realize it was New Years Eve I am still stuck I think cuz it is Asus and it may have its own little get up but i tried :( thank you
I'm having the same problem
Same
Same
Any one solve it for asus yet ?
@@henzotheprod solved it
Love you brother you are so grate
In the last solution , it was ok until I typed
attrib c:\boot\bcd -h -r -s
When I typed this I get error “path not found - c:\boot
What can I do for this ?
None of other solutions are not working for me
Thanks very much it worked 🎉🎉🎉🎉
thanks bhai..
kaam kr gya
solution no 4.
love you bro.
Thank you so much 🤗
It asking for command number what should i put?
Thanks brother its worked for me , solved my problem.
Thank you brother ❤
Access is denied wht should i do? 😢
thanks bro it really helps me a lot
All the 4 steps is failed, my drive is crrupted and not readable :(
Thank you bro . I really appreciate it
did it work and what worked for you?
In 3rd Salution while commanding md \efi\microsoft\boot\ has no response on these in my pc but I further trying to proceed... I got my pc problem while opening different chrome a/c in my computer suddenly my operating system got lack and my computer given me QR code that I had taken picture of that but I am continue trying to open my operating system that I didn't get ..please help me 😭
I tried to format the hard drive using the cmd and it did not format. I am getting an error.
Sir I accidentally deleted my windows 10 and my pc is not starting it is showing choose an option page please help me sir
Same here
It can be fixed easily search for video with the name how to reinstall windows from phone to laptop
No i didn't delete my windows it's bringing me on the choose an option Page
@@deadlygaming1000 same idk what happend i was playing then restarted the pc then boom
oh
After attrib c:\boot\bcd -h -r -s.. I was told - C path not found
I don't have option of start-up settings then what to do
Thank You Sir !!
thanks…. it worked for me ❤
After the can mine said it found corrupted files and fixed it but when I reboot it still didn’t boot up , the screen black with backlight and cursor spinning
Thank you so much. Totally fixed the issue
It tells me totally identified windows installations: 0 Please help me
Thanks for sharing these. My Boot Disk is showing up with "Unknown" status on the DiskPart command!! How can I change the Status to online!?
I have done all the steps but it's not working. Please help
Thank you very much🎉🎉🎉
Bootrec /fixboot it shows access is Denied.. pls help me how to repair my pc
Same goes with me
Thnkuuuu so much.......🙏🙏🙏
super, it work and it solved my problems with booting w10 :)
After "attrib c:\boot\bcd -h -r -s" it says "path not found - c: \boot"
Same to me. Pls help
Same please help
Bootrec /fixmbr shows “A device which does not exist was specified “
chkdsk /f c:
“The type of the file system is RAW.
CHKDSK is not available for RAW drives.”
Tks u so much brother❤
First step works for me, thanks🎉🎉🎉
Perfectly done thanks a lot
my backslash wont type on my keyboard
Reset option is not showing in my laptop Bro. What to do now ? Please Help Me!
After the nT60 was successful , the bcdedit /export c:\bcdbackup. Failed
This drive is locked by buttocks drive , you must unlock this drive from control panel
Broo thank you very much 3rd method work for me❤❤
Thank you very much
Very helpful for me
For Win 11
Which method did you use?
My PC isn't entering the advanced recovery environment...when i try, its interrupted by a black screen saying STOPCODE PROCESS1 INITIALIZATION FAILED and it restarts back to windows.
I cant get it to the advanced recovery environment let alone safe mode, please help!
Thank you so much bro !!
HELP, I tried solution #3 and I can only get to the point fixboot, then I get a message of access denied.
Same problem
Thank you 🥺❤️
Seriously, Thankyou 😂❤
These steps still didnt help me with my tablet. When it starts up it looks like the internet browser or some message is about to show but it disappears quick. I dont know what to do.
Can you help me please
When I try to copy it told me that there's no enough space on disk
Please help. Fourth method, "attrib" step, I get path not found - C:\boot
10:55 while following this step bcdedit /export c:\bcdbackup
I get error saying "This drive is locked by bitlocker drive encryption. You must unlock this drive from control panel"
Now the problem I don't know bitlocker password, neither I can open control panel because my pc won't open its given blue screen saying unmountable drive
Same issue is coming in mine
Ay it didn't work on me maybe I should reinstall windows all together coz I know I messed up a lot before I saw this but thanks man
attrib c:\boot\bcd -h -r -s gives me the error c:\boot\ path not found....
Hi,
I tried your all the ways but still my system is not starting. Actually iwhen it was working that time I went to services. Msc and disabled the windows license manager and restart but it didn't get restart and problem starts from then.Can you please help me?
After using last step i,e bootrec command , still system.going to autinatic repair and there was no change
Attempted at Solution 3 but encounter the problem of CMD cannot recognize code: bootrec /fixboot. please assist.
You forgot to add the part where we give our credit card details
the 4th method done all the steps but at attrib c:\boot\bcd -h -r -s gets the error path not found c:\ Is it because I have a different boot order ?
Saaaame😢
lot's of thanks 😊🎉❤
Thank you IT works
Bcdedit /export c:\bcdbackup shows the media is write protected, how do i solve it
I can't reset my PC, I have done everything but it's not working. I have watched all the RUclips to find how to solve the problem, please can you help me ? My PC is Dell laptop and it's windows 10
put a usb then reinstall
For some reason My screen turned completely blank at first yet it worked
very nice the video
the bootrec /fixmvr showed a device which does not exist was specified. pls answer huhu
After I did the method 4 ut still show me blue screen and can not boot to desktop
I think it dint work bc my vol is vol3 instead of vol2 let me try it
I cant even access safe mode with command prompt 😢😢
Non of them worked , the last way the computer says “system device cannot be found “ help me plz what should i do ???
After all that it again showing diagnosing your pc