Except when you have rear window switches. The cables don't feed out easily. Feed them both through the passenger side, one housing after the other. Also, for the front cup holder, the rubber lining comes out when you pinch on either side of the coin holder simultaneously. No need to risk damage with a flat head and MUCH easier. Thanks for the vid! Keep up the good work.
Very helpful. I was not able to get the knob off the shifter though. I took the allen screw out but it just would not come off. I wonder if something changed for 2009.
I was not able to lift it all the way. Seems the sides of the seats are too wide and not allowing the clearance needed. What can I do? I am so stressed. lol
Do you know if there's an interior fuse box for this car? Tried exterior but don't think that's where the issue lies. The power window on the driver side doesn't roll up, the window regulator motor had been replaced as well as the switch for the Windows in the radio dash to no avail.
Could you guys maybe help me with answering this? I just bought a 2009 cruiser and my brand new cigarett lighter USB adapter for charging my phone from tmoble..the light went out then it started smelling electrical. The windows didn't work after 5hat for a half a day..how screwed am I?
Jukka Alve, as I recall, the power window switches in my 2006 were on the dashboard - might be different for other model years. There's a tab/button on all electrical connectors you typically squeeze to release. Hope this helps.
Jukka Alve, A word of caution here - older vehicles whose park brakes are not used/exercised regularly may may bind/drag after applying and releasing the park brake (typically caused by rusting cables). If the handle doesn't raise high enough, you can try pulling up firmly on the park brake handle. Otherwise, disconnect the park brake cable. Hope this helps.
@@utstarcomarc Is your2007 PT cruiser the base model? I'm curious if there is a power outlet in the center console. I know there are window switches in the back.
Except when you have rear window switches. The cables don't feed out easily. Feed them both through the passenger side, one housing after the other. Also, for the front cup holder, the rubber lining comes out when you pinch on either side of the coin holder simultaneously. No need to risk damage with a flat head and MUCH easier. Thanks for the vid! Keep up the good work.
This was an amazing help, had to replace the shift assembly and shift linkage. Thank you for the upload, cheers!
Did you do it yourself? Was yours an automatic?
Very helpful. I was not able to get the knob off the shifter though. I took the allen screw out but it just would not come off. I wonder if something changed for 2009.
lol was afraid of breaking something till i watched your video , thanks champ!
pro trick: watch movies on Kaldrostream. I've been using it for watching loads of movies during the lockdown.
@Samuel Gunnar yea, I've been using KaldroStream for months myself :D
REALLY helpful simple video. thanks
I was not able to lift it all the way. Seems the sides of the seats are too wide and not allowing the clearance needed. What can I do? I am so stressed. lol
Do you know if there's an interior fuse box for this car? Tried exterior but don't think that's where the issue lies. The power window on the driver side doesn't roll up, the window regulator motor had been replaced as well as the switch for the Windows in the radio dash to no avail.
what about the rear window switches attached to the console?
thanks a bunch!
Could you guys maybe help me with answering this? I just bought a 2009 cruiser and my brand new cigarett lighter USB adapter for charging my phone from tmoble..the light went out then it started smelling electrical. The windows didn't work after 5hat for a half a day..how screwed am I?
Können Sie empfehlen Medikamente für Furz und Durchfall?
i have i 2010 cruser it took me about 2 hours to put it back in place
Can You Say me how ?
My e-brake handle only rises to 45 degrees. Do I have to disconnect the cable or something?
Jukka Alve, as I recall, the power window switches in my 2006 were on the dashboard - might be different for other model years. There's a tab/button on all electrical connectors you typically squeeze to release. Hope this helps.
Jukka Alve, A word of caution here - older vehicles whose park brakes are not used/exercised regularly may may bind/drag after applying and releasing the park brake (typically caused by rusting cables). If the handle doesn't raise high enough, you can try pulling up firmly on the park brake handle. Otherwise, disconnect the park brake cable. Hope this helps.
is this the same for the 2007
Christy Huston yes, i have an 07 its the same
My 2006 shifter knob has no he screw. Now what?
@@utstarcomarc Is your2007 PT cruiser the base model? I'm curious if there is a power outlet in the center console. I know there are window switches in the back.
Why would you take it all apart i dont get y he is doing this...
I am doing this to replace loose shifter bushings. He could be doing the same...
Or to run RCAs from an after market stereo to an amp. Also to run the illumination wire from the stereo to the cigarette lighter
Miquel, if you ever need to replace the bulb for the gear selector marker, you'll need this info.