Generally speaking, a belt too tight will cause a shaft to break where that one broke, and also the lock collars on the bearings should be removed first from the bearing to efficiently remove the bearings, In my experience of a lifetime industrial mechanic and millwright.
Thanks for the video! I noticed you run the larger cuts last.. How long do the logs have to dry or cure, before they are ready for milling? And do you control the humidity in the process?
You would have a lot less trouble if that was a round drive roller. A rubber covered drum would be best but knurled steel should work. That open drive causes a vibration that causes metal fatigue in the shaft and bearings. You could drill 1" holes in the drum with a stagered pattern if trapped sawdust is an issue, but ditch the flat bars.
Well this one was a replacement to the original, but not done by the original fabricator. The one we changed a couple months ago worked for 37 years🤷 and the break that got it, was really the bearings boogering the shaft
Наука
Im not a big fan of circular mills, but this one seems to do well. Nice setup.
I appreciate that!
Generally speaking, a belt too tight will cause a shaft to break where that one broke, and also the lock collars on the bearings should be removed first from the bearing to efficiently remove the bearings, In my experience of a lifetime industrial mechanic and millwright.
I wish I lived closer for me this would be like a kid in a candy store👍
me too
Great job😊😊👍👍
You hustled those six logs out the door right smart like.
Thanks for letting us know what you're cutting.
Thanks for the video! I noticed you run the larger cuts last.. How long do the logs have to dry or cure, before they are ready for milling? And do you control the humidity in the process?
@@overtime6696 I’ve milled trees in the afternoon, that were standing in the morning!
You would have a lot less trouble if that was a round drive roller. A rubber covered drum would be best but knurled steel should work. That open drive causes a vibration that causes metal fatigue in the shaft and bearings. You could drill 1" holes in the drum with a stagered pattern if trapped sawdust is an issue, but ditch the flat bars.
I've graded a lot of KD poplar, 4/4 up to 12/4 .
Me parecem madeira de primeira linha, muita qualidade! Quem morar por perto comprem! 👍👏
Looks like you need a different design on that roller as it looks like there is vibration instability issue.
Well this one was a replacement to the original, but not done by the original fabricator. The one we changed a couple months ago worked for 37 years🤷 and the break that got it, was really the bearings boogering the shaft
Do you mill to order or mill to maintain a stock profile?
We do everything!! Orders, stock, and satisfying grade lumber companies, RR Tie companies, and Cant companies
What are the big rectangular poplar cants used for?
Why were you not edging many of these boards?
O like the fixing when needed, everything breaks and one time or another.
Where are you
@@macguy12341 brown county, Indiana!