The surface of the 3D printed output is not smooth. It would be nice to smooth the surface and paint it, but I didn't try painting it because it was too cumbersome. :)
Hi, sorry to bother you on such old video, i got the 35mm 1.5t samyang lens but i saw in the last video that wasn’t the same lens, mine has 2 tooth and skiny rings instead of one big ring for the focus and another small one for the aperture, will it fit for my lens? Or its just another model
Sir, do you have a profile for your prints? Is it possible to download your PLA profile? I've been printing with PETG and no experience yet with PLA, I might mess it up. I'm a total noob but I'm a fan of your work and would like to try printing one of your designs. I'm using an Artillery Genius printer and PrusaSlicer as a program when printing.
Hi, There is no special profile file because I use a 0.4mm nozzle and use the most common printer settings. In my experience, PLA and PETG have almost the same output properties, except for some material differences. I believe that minor differences in output results can be resolved with simple post-processing. :)
sorry! I enjoy doing this as a hobby, so I don't sell them separately. 3D printing is neither expensive nor difficult. You can easily learn by searching for information. We recommend using a shared file to print directly and apply it to the lens. :)
You should do a rehousing for the Auto Sears/Rikenon 55mm f1.4
Are these parts paintable? Like spray paint metallic colors or give it a glossy look?
The surface of the 3D printed output is not smooth. It would be nice to smooth the surface and paint it, but I didn't try painting it because it was too cumbersome. :)
Hi. loving these videos. any chance of a housing for more Nikkor lenses. 28mm, may be a Yashica ML 50mm
Nice work. If I have a Samyang Cine and don't want to disassemble the lens, can I skip the aperture part and just install the front? Thanks
Maybe it's possible It's been a while, so I'm not sure :)
Damn, these housing are beautiful! ~
Any plans to adapt the Samyang 50 1.4/1.5 or the Samyang 85 1.4/1.5? 🤔
리하우징 하시려면 기존에 삼양렌즈의 규격?수치를 알고 있어야 사이즈 딱맞게 각부분들을 모델링을 하시는거 이지 않을까라는 생각인데 가지고 계신 렌즈들의 정확한 수치와 규격을 어떻게 파악하시는건가요!
따로 공개된 자료가 없어서 렌즈에 실측하고 있습니다. 버니어 캘리퍼스를 주로 이용하고 필요에 따라서는 간단한 수학적 계산으로 수치를 구하기도 합니다. ^^
@@MountainBreezeStudio 아 실측을 하시는거군요! 실측하는 부분이 생각만큼 쉽지않아보이는데 시행착오가 많을거같네요 감사합니다!
Is there any reason why these are all gray? Could these be printed all black?
Hi, sorry to bother you on such old video, i got the 35mm 1.5t samyang lens but i saw in the last video that wasn’t the same lens, mine has 2 tooth and skiny rings instead of one big ring for the focus and another small one for the aperture, will it fit for my lens? Or its just another model
Hey man, what 3D Printer do you use? Also, is this FFF? Plastic?
Sir, do you have a profile for your prints? Is it possible to download your PLA profile? I've been printing with PETG and no experience yet with PLA, I might mess it up. I'm a total noob but I'm a fan of your work and would like to try printing one of your designs. I'm using an Artillery Genius printer and PrusaSlicer as a program when printing.
Hi, There is no special profile file because I use a 0.4mm nozzle and use the most common printer settings. In my experience, PLA and PETG have almost the same output properties, except for some material differences. I believe that minor differences in output results can be resolved with simple post-processing. :)
Do you have plans to work up housings for EF mount Canon lenses ?
Sorry! I don't have any concrete plans for working with EF lens housings.
@@MountainBreezeStudio how much would it cost us to create some plans?we could band together ?
Hey do you by any chance have a 3d model for Pentacon b mount to Efs STL file?
Sorry. I don't know much about the Pentacon b mount.
@@MountainBreezeStudio Alright cool thanks
Can it be used with Nikon F mount?
I haven't tested it on a Nikon F mount lens. It seems right... Sorry! I do not know.
Can you make one for me? I will love it ❤️❤️❤️ i want to buy it
sorry! I enjoy doing this as a hobby, so I don't sell them separately. 3D printing is neither expensive nor difficult. You can easily learn by searching for information. We recommend using a shared file to print directly and apply it to the lens. :)
@@MountainBreezeStudio please, 3d printing n blah blah... it's not my cup of tea 🙏🙏🙏 please allow me
대단하네요...입이 떡...
damn!