You can attach the radiator in between the case and the fans. That will use 30mm screws (from fans to radiator) and 5mm screws (from the top of the case into the radiator).
Great video! Do you need NZXT’s rgb and fan controller to control the fan speed and rgb? Or z53 itself act as a controller? I saw rgb controls in your CAM app
Putting a cooler on with no thermal paste/compound is asking for bad temps you’ll probably get anything between 15-30c difference under load, I understand for a test bench it isn’t needed but if put in a system it’s definitely needed due to all the heat the system throws out under load
Fan 2800 RPM, its not fan rpm, its pump rpm. I don't know how it's possible, if you connect the signal reader to the aio pump port, the fan rpm on the cam shows n/a, but if you connect it to the cpu_fan1 port, it shows the pump rpm instead of the fan rpm on the cam. I can control the CPU fans, but I can never see the RPM.
i fixed it.. I'm telling you why I can't see the rpm in case it helps someone. There are 3 fan multiplier cables coming from the pump. 1 of them is 4 pin, the other 2 are 3 pin. It is necessary to connect one of the CPU fans to the 4-pin connector. Only the 4-pin connector can read the fan rpm and send it to the cam software. The other 2 pcs 3-pin connectors do not send it.
Hello nice video!! I have a question I have an Asus LC240rgb white edition everything is working but de fan's RGB is not working I have a green light on it and I don't know how to repair it, do you think u can help me?
BRO THIS HELPED ME SO MUCH THANK YOU!!!
Always welcome bro
If needed is there a way to replace the liquid? And how
There is but no need 3 to 4 years
It would be useful if you talked
It would be even more useful if I could actually tell where you’re plugging half the stuff in
the rgbs are controlled by the internal usb cable?
Yes with usb cable
In a word No.
Does it come with the lga1700 bracket?
Yes
is it required to take out the motherboard for the installation?
No you can install with out
Would love a test with the i7 13700k
i have the same cpu!!
@@yassirrr how do you keep the Temperature low on your system?
@@Mauwe put water on it trust
Hi, i have a problem whit the rgb fans, the nzxt camn recognize the rgb fans like a led strip
How long did it take to get, they haven't sent me an estimated delivery date yet, been a week
Do you have to add liquid to this or what
No . It's come ready just install
Did it short out after you peeled off the screen protection on the lcd screen??
No
Name of the case pls? And what size are the fans on the front of the case? It would be helpful if you put the items used in the description. Thanks
It should be Cooler Master - MasterCase H500P Mesh
.
If i disconnect the micro usb, I get rid of the display? When my pc is in sleep mode I cant turn off rgb but when its not in sleep I can put it off
Can anyone tell me the name of the cable that connects from one fan to the other seen at 4:43-4:50/
looks like these screws that hold the fans are too short if you wanted to fix the fan outside the case
You can attach the radiator in between the case and the fans. That will use 30mm screws (from fans to radiator) and 5mm screws (from the top of the case into the radiator).
man muss doch wärmepaste vor dem bildschirm zu befestigen drauf machen?
For Z53 can you also change the display into GIF?
Yes
Good 👍
Great video! Do you need NZXT’s rgb and fan controller to control the fan speed and rgb? Or z53 itself act as a controller? I saw rgb controls in your CAM app
No need controller you can control it with nzxt cam software
Is it normal for the small double sided screws put on the mother board to wigle a little bit with the plate putted at the back of the mother board ?
Hello, do you know if the X53 is also for Intel?
They come with own mounting thinga so you can put it on ryzen and intel builds. But just check their compability in specs
Putting a cooler on with no thermal paste/compound is asking for bad temps you’ll probably get anything between 15-30c difference under load, I understand for a test bench it isn’t needed but if put in a system it’s definitely needed due to all the heat the system throws out under load
Was just about to ask this. I’m building my first PC and cooler is my next buy. Was going to ask does this not need thermal paste?
@@davidkitching5301 The nxzt kraken comes with thermal paste pre-applied :)
has pre applied thermal paste
Rgb is all plugged in, and plugged into USB header on mobo also, no rgb lights on fans, and screen not on pump either, any idea?
RGB fans probably need to be plugged into ARGB header
@@jesseoh272 AIO was DOA, returned and replaced
how did u fix it?
@@oro2915 its was dead, returned and replaced it, tons of them are bad new from the factory
@@CoolStoryUMADBRO mine works now, i just plugged it into the wrong header
Hello. How are termos on your cpu with 240 mm AIO? 360mm wouldnt be a better choice? Thx
Both sizes are good but yes 360 would be better, but more expensive
Fan 2800 RPM, its not fan rpm, its pump rpm. I don't know how it's possible, if you connect the signal reader to the aio pump port, the fan rpm on the cam shows n/a, but if you connect it to the cpu_fan1 port, it shows the pump rpm instead of the fan rpm on the cam. I can control the CPU fans, but I can never see the RPM.
i fixed it.. I'm telling you why I can't see the rpm in case it helps someone. There are 3 fan multiplier cables coming from the pump. 1 of them is 4 pin, the other 2 are 3 pin. It is necessary to connect one of the CPU fans to the 4-pin connector. Only the 4-pin connector can read the fan rpm and send it to the cam software. The other 2 pcs 3-pin connectors do not send it.
Why when i put a picture its like a square shap ?.
Use bmp file and try
Hello nice video!! I have a question I have an Asus LC240rgb white edition everything is working but de fan's RGB is not working I have a green light on it and I don't know how to repair it, do you think u can help me?
Asus lc240 new or old?
Great video ❤
You can put some gif?
Yes
Thank you!
Very uninformative