Without this video, I never would have gotten my PV2+ back together again. I crashed it a while back and was convinced that I had done major damage to the gimbal because the flat cable looked fine, including all of the connections. I got a two pack of the cables on Amazon for about $25 and decided to give this a try. I installed one of them and all systems are now 100% functional. Thanks a lot! You just saved me $590!
Amazing, absolutely amazing. I do worry that you don't put the screws into a bin of some kind but your knowledge of how this piece fits together is enviable!
i have them on the rag right there and i actually know exactly how many screws and which kind goes where so there is never a confusion :) i know, is sound like a nerd!! LOL
Thanks for the video! Enya was keeping me calm in the face of much stress for this first timer. I'm happy to report ribbon cable replacement was a success first time around! Don't know why you didn't put some annotations, it would help a lot. I had a hell of a time figuring out your "sign language". Although, like I said, Enya was a plus. I re-assembled in a slightly different order, but still worked. I'm tempted to do it again and make a video of my own with a zoom lens or magnifying glass. Nah, that will never happen!
Alex Dantas Well, the gimbal worked, I can record video and take still shots and tilt the gimbal but there is no live feed. I think there is also a problem with the image processing board located on top of the OFDM PCB, at least that is what DJI support hinted at.
Alex Dantas btw Alex, all the tutorials on changing the cable are useless, it is much faster and easier than that and you don't have to disassemble the gimbal. You only open the back cover of the camera (4 screws) and the cover of the upper gimbal control board (4screws) The rest of the flat cable latches along the gimbal arm can be opened with a tiny hook formed at the tip of a needle and closed with a toothpick. Also note that you have to start installing the cable at the camera side and not the upper gimbal board.
Laughing at song choice, Sail Away. Just funny to me. You make it look so easy but I would have tossed something by this point. lol Not so good with small, delicate things.
Flat down, where you screw in the camera... now it depends, because V3 camera are the other way around. in either case you want to have camera lens facing you and half moon shaft facing you too when screwing in.
I am having problems weigh a p2v+ gimbal..i had ordered a roll board...i think I needed a put h board though, the one I took out had a P on it...they look the same ..is there a difference , because it just beeps now
Have you ever had any problems like this? Three short buzzes after cable replacement: drive.google.com/file/d/0Bzkga72S04auNGRjSFhGcGNReTZkblBiOTBqSE16ak1QUno0/view?usp=sharing
+TheA8W12 just replaced it with another one...still three buzzes. Wonder if one of the motors is fried. A crash broke the camera off the shaft, so I had the ribbon replaced. They used epoxy to hold the camera on. Worked good for a few months. Then another hard landing and the camera came off again, so the ribbon broke again. Tried to do the fix myself, but wondering where I went wrong. I bought a pack of two ribbon cables. I wonder what the odds are that both are junk.
Thanks for following up! I am wondering if some of my epoxy got into the motor after I glued the camera back to the shaft of the gimbal. These are the cables I bought: www.amazon.com/gp/product/B00RLU5TZ8?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
yup, good chance you got bad cables. buy original DJI cable and try. i am almost 100% sure it will work with that one.. if you're on facebook, search for group called Uav Repair Shop and i'll add you. that's my group for my uav shop. easier to communicate there facebook.com/groups/1488547618072392/
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
AWESOME ... you are a skilled mechanic with these minature cameras ... awesome work, thank you for sharing ..
James Nickerson this was long time ago :)
But thank you!
Without this video, I never would have gotten my PV2+ back together again. I crashed it a while back and was convinced that I had done major damage to the gimbal because the flat cable looked fine, including all of the connections. I got a two pack of the cables on Amazon for about $25 and decided to give this a try. I installed one of them and all systems are now 100% functional. Thanks a lot! You just saved me $590!
bmoorepsu very glad it helped you!
Amazing, absolutely amazing. I do worry that you don't put the screws into a bin of some kind but your knowledge of how this piece fits together is enviable!
i have them on the rag right there and i actually know exactly how many screws and which kind goes where so there is never a confusion :) i know, is sound like a nerd!! LOL
Thanks for the video! Enya was keeping me calm in the face of much stress for this first timer. I'm happy to report ribbon cable replacement was a success first time around!
Don't know why you didn't put some annotations, it would help a lot. I had a hell of a time figuring out your "sign language". Although, like I said, Enya was a plus.
I re-assembled in a slightly different order, but still worked. I'm tempted to do it again and make a video of my own with a zoom lens or magnifying glass. Nah, that will never happen!
Gracias por tu video. Arreglé mi Phantom.
Thanks for your video. I fixed my Phanton. ;)
glad to hear!
Thank you very much for the video! Although, (knocking on wood) I don't need to do this now, I know I will in the future.
if you do, let me know or go to www.uavrepairshop.com and contact me through t it.
excellent, i fixed it with your help
Thanks Man! You Rock! Perfect Video! I used it to change the flat cable on my phantom 3!
Alexei Karam where you find the cable? did works?
Alex Dantas Well, the gimbal worked, I can record video and take still shots and tilt the gimbal but there is no live feed. I think there is also a problem with the image processing board located on top of the OFDM PCB, at least that is what DJI support hinted at.
Alex Dantas btw Alex, all the tutorials on changing the cable are useless, it is much faster and easier than that and you don't have to disassemble the gimbal. You only open the back cover of the camera (4 screws) and the cover of the upper gimbal control board (4screws) The rest of the flat cable latches along the gimbal arm can be opened with a tiny hook formed at the tip of a needle and closed with a toothpick. Also note that you have to start installing the cable at the camera side and not the upper gimbal board.
Alex Dantas I got it locally in Lebanon from a DJI distributor.
Alexei Karam i did broke the Gimbal Yaw arm and the cable.. Thanks for your Help my friend!
Laughing at song choice, Sail Away.
Just funny to me.
You make it look so easy but I would have tossed something by this point. lol
Not so good with small, delicate things.
LOL, wasn't even paying attention. i just pick music where videos don't get banned because of copyright.
thanks for the comment
Great video but can you please clarify which way the flat goes on the camera mount shaft? Flat down or up? Thanks!
Flat down, where you screw in the camera... now it depends, because V3 camera are the other way around. in either case you want to have camera lens facing you and half moon shaft facing you too when screwing in.
I am having problems weigh a p2v+ gimbal..i had ordered a roll board...i think I needed a put h board though, the one I took out had a P on it...they look the same ..is there a difference , because it just beeps now
hi I crashed my p2v+ and on the app, the video is blue could it be a bad cable ? I check the cable it has a dent cuz I hit the tree.
does this ribbon cable work with the phantom 3 standard?
Nice video :)
Do you know a solution for the replacement of that ribbon cable in my Zenmuse H3-3D Gimbal in my Phantom 2 (not Vision+)?
Thanks :)
Очень круто!
Классно
Красиво
Великолепно
This is Awesome
Amazing
Obrigado pelo vídeo, muito bom, agora vou conseguir trocar o cabo do meu Vision, Obrigado Obrigado Obrigado
you're welcome!
www.amazon.com/dp/B00RLU5TZ8/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3LRV8S5FJNH7A&coliid=I3D1WZK61H8PVZ
Hi nice video.
Here can i find a cable replace and what was the price?
;-)
www.amazon.com/dp/B00RLU5TZ8/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3LRV8S5FJNH7A&coliid=I3D1WZK61H8PVZ
i bent my phantom 2 vision + gimbal yaw arm do you have any spare one around?
Hi! Nice video!!
I recently crashed my pv2+ gratefully my camera is leveled, but it is slightly pointing to the right any suggestion ? Thx
Have you tried doing Advanced IMU calibration yet?
UAV Repair Shop Do you have a video showing exactly that (Have you tried doing Advanced IMU calibration yet?)? Best Soeren
I think i damaged the gimbal pitch driver v2 , where can i get it?
there are two. P and R. which one?
The one that has 3 screws in the back! Cover
that's R. i have plenty
How can i purchase one?
www.shop.uavrepairshop.com/Phantom-2-gimbal-sensor-board-P-or-R-0027.htm
Where i can buy cable fo Xiro Zero Explorer Vision ? please help :(
Pitch
Have you ever had any problems like this? Three short buzzes after cable replacement:
drive.google.com/file/d/0Bzkga72S04auNGRjSFhGcGNReTZkblBiOTBqSE16ak1QUno0/view?usp=sharing
Yup, red blinking light and those beeps indicate bad ribbon cable.
+TheA8W12 just replaced it with another one...still three buzzes. Wonder if one of the motors is fried. A crash broke the camera off the shaft, so I had the ribbon replaced. They used epoxy to hold the camera on. Worked good for a few months. Then another hard landing and the camera came off again, so the ribbon broke again. Tried to do the fix myself, but wondering where I went wrong. I bought a pack of two ribbon cables. I wonder what the odds are that both are junk.
i still think it's the cable. where did you get the cables?
Thanks for following up! I am wondering if some of my epoxy got into the motor after I glued the camera back to the shaft of the gimbal. These are the cables I bought:
www.amazon.com/gp/product/B00RLU5TZ8?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
yup, good chance you got bad cables. buy original DJI cable and try. i am almost 100% sure it will work with that one.. if you're on facebook, search for group called Uav Repair Shop and i'll add you. that's my group for my uav shop. easier to communicate there
facebook.com/groups/1488547618072392/