XFly Pulsar| 3-AXis Gyro RC Flight Controller including Front Gear Lock

Поделиться
HTML-код
  • Опубликовано: 7 ноя 2024

Комментарии • 9

  • @kennethjames3925
    @kennethjames3925 2 года назад +1

    X fly is really coming out with some great rc airplanes, and equipment. They are putting the rest of the hobby on notice.

  • @kennycastro
    @kennycastro 2 года назад

    Is this like the e-flite SAFE technology?

  • @JeffsCustomRC
    @JeffsCustomRC 2 года назад

    Great work!!👊🏼

  • @21y1ihuangzhongyi6
    @21y1ihuangzhongyi6 2 года назад

    Hi is this a receiver?

  • @SuperDominicco
    @SuperDominicco 2 года назад

    Hi this will work with Frsky and radiolink transmitter?

    • @xflymodel2017
      @xflymodel2017  2 года назад +1

      Hi transmitters and receivers with 7ch or above will work ;)

  • @James-gz4oj
    @James-gz4oj 2 года назад

    xfly are on it

  • @Omega-ct6kd
    @Omega-ct6kd Год назад

    Very misleading with regard to the gain setting. I have been using gyros since I flew helicopters in the mid 90's I think I have tried out about every gyro made for the RC Market some $20 up to $400. You show 30% gain and then the other way you show 75%.gain.So in the gyro-off position, all the servos are all working in the correct direction. Now if I turn the gyro to the lock mode and test the gyro out to make sure the control surface is moving in the correct direction. So all was good except for the ailerons. So I had to move the dial 9Pot) the other way which you show it as a 75% gain??? Anyhow now it works correctly.
    The question is, do you have to do a calibration every time you fly the plane???. I never could get the front wheel to keep a straight line, so I install a gyro made for this application.
    .

    • @ernestostrman5147
      @ernestostrman5147 Год назад

      If you used so many gyros, tell me which gyro you needed to calibrate before every flight?