Took me 5 tries to get one that didn’t stutter when it started and finally one that started fine is still low on power compared to my old 12”dewalt, it’s getting fixed and brought out of retirement
Been a carpenter for 30 years and always used elu and then dewalt untill 4 years ago when I bought a flexvolt 305 saw and was worst days work I ever did firstly the mains adapter blew it up so when in for new motor it then came back with a blade wobble and brake did not work very long story short sold it and got makita 40v saw which I love and the festool for fine work . Still use dewalt battery platform and touchwood not had a problem with screw guns or other tools thank god
I've read a few stories about the flexvolt burning out when connecting to mains electricity, Also sending broken kit to dewalt the dewalt 'fixit' crew fecking their tools, by breaking it more, and denying they broke things and unwilling to put things right. I'm like you I have Dewalt cordless drills, and they are holding up okay. My only Festool kit is my Domino 700, which has done a lot of work for me, and I do love.
Agreed. 37 years a chippie now, had the fokkin lot but mainly dewalt now and they're fine. Never have, never will buy a dewalt choppy though. The old Elu's were Swiss made and built to last but never like the Dewalt choppy versions. I have a corded Makita 305mm/216mm choppy and it's a belter - albeit ragged and dogged to fuck.
Slower speeds on some hardwoods will prevent burning. Maybe less of a problem with saws, but with my router I really notice the tendency for burning. I love the speed control on my Makita trim router.
The same with modes on an impact driver and auto start with a jigsaw. Plunge speed is the same as using your finger on the variable speed trigger. You should be able to buy a specific driver for self tapping screws for an impact. Being proficient using any tool cannot be overcome with modes. Like the idiot launching trapped cuts on a tablesaw, while only holding onto the offcut.
Such a shame. I got my DWS780 about six months ago, and it was missing a roller on the blade guard. the supplier (Toolstop)sent me a pair of rollers and serrated clips, meaning I didn't need to send it for a warranty repair the team over there made this fix painless for me. Better than DeWalt as I got no response at all from them when I contacted them with regard to my issue. Thankfully other than that it runs nicely... for the moment. Such a shame and a disgrace. I'm not brand loyal, I have Makita and Bosch tools also, I get what I feel is the best tool for me. I'm seeing others having problems with DeWalt service also, so something to keep an eye on.
Sounded like the second one had the same 220v voltage regulation but was just running at 110v. Making it just run half speed. I'll bet you if you just took the second one and put a 220 plug on it then it will run the right speed.Dunno why anyone would buy this saw. You can get the Bosch which is just an amazing saw for almost the same price. Also doesn't need extra space behind it. In america the Dewalt is $649 and the Bosch is $699 at home depot or lowes.
I got a truck starter from a parts house that was bad like that ! Toke it back and made them test 4 more off the shelf before I carried the 5th one that tested good home ! Just because it’s new in the box does not mean it good to go .
No wonder they are almost 50% less in price than Hitachi(Metabo), Makita and Bosch in 12" compound versions. Outsource and cheapening equals CEO bonus!
I’ve been a joiner for 34 years in the USA and the north of Ireland and have used all brands of mitre saws in my work and I have found the best all round saw from roofing to finish work is Dewalt 12” mitre and the strongest! Makita 12” can’t do as much or as well and much larger and heavier would not take one for free.Dean you would know which brand sell the most?
And I would completely agree with you. That's why we always stocked the dewalt 12inch only. Never the makita. But this is a joke. We cannt even sell these dewalt saws. Customers just leave them back because they don't function as a 1000 euro miter saw. This is a problem we have seem only in the last month or 2 with brand new saws.
This is sad to see as dewalt have historically made the best mitre saws on the market. used them for ten years and never had an issue. from busy workshop environments to site work they used to be really robust and accurate…. Looks like the new ones are being built to a lower standard. such a shame!!
I have the 780, and the blade has sideways play in it from when I bought it, I sent it back to Dewalt in Utah 2 times still has the wobble, piece of junk, I have owned about 6 sliding saws in past from Festool to Hitachi and Dewalt, never had a blade where the housing moves when you grab the bade and move it side to side. Does your have blade play in it?.
Id be checking the blades for bends\warp before condeming a tool for spindle bend. Awfully hard to bend the spindle but real easy to throw saw in bed of truck & easily bend a blade, especially a 12" one at that. Idk, this is one of their most popular saws being made for years, I find it hard to believe they're all bad today but they are probably being made in China now, so there's that!
It's also had to bend a blade. Mort of the time it the back flange that holds the blade. But that's not the problem here. Iv tried replace the flanges myself. No good. I don't actually think the spindle is bent. More it's not mounted true. Dewalt have change something with the way these are now made. And the build quality is paying the price. This was the only 12inch saw we ever stocked. It's the main seller. But we cannot sell them now like this. This is only new saws to be clear, ones on sale now. It's a very recent problem
@@deandohertygreaser I sent mine in 2 times, the first time they replaced the washers, told them not fixed blade housing is loose, the second time they said they replaced the housing and it still does it, what are you going to do, crapy saw that they can't fix.
Dewalt and Milwaukee... utter joke of a "high quality" tool brand. I run Makita and Bosch. Never had a problem with them that was not a simple matter due to just wear and tear. Makita and Bosch are also some of the few brands that havent sold out ot a big conglomerate and sourced everything out to the lowest bidder in China. They do produce in China though but usually its the cheap n cheerful stuff they exclusively make in China. I have Bosch tools Made in Malaysia and even Germany aswell, Makita made in UK and Romania (They seem to have established a large factory for all sorts of Rotary Hammers and Demolition Hammers there). These days I run more and more Makita because their price to quality to performance ratio beats Bosch and Bosch has a smaller selection of tools.
DeWalt 54v cordless miter saw has a problem where it burns, when used with mains adapter, well known in company repair shops, but there no warning on that adapter.
What repair would you recommend for the slower motor speed? Is it the arbor? Mine is out of warranty and as it was my first ever saw I didn’t really know it was faulty until it’s too late.
Is it the products produced for the European market? I’ve been looking at others assessing this model but they’re out of the US and those seem to be fine.
Such a shame, shadow line idea is brilliant. I have a Festool Kapex, laser lines nowhere near as good as DeWalt shadow line, which I had before (780 earlier variant). Edit: I wonder if the blades are warped or if the spindle is caddywompus
Sometimes wobble can be fixed with lapping an uneven arbor flange and nut. Should it be fixed at the factory ,absolutely. But a much easier fix then a table/fence out of level or plane.
I have a van full of Dewalt tools of all types re carpentry and joinery. By and large, they're alright and economical enough however, I have never rated Dewalt chop saws for a number of reasons and I have a corded Makita 305mm/ 216mm blade which is buggered, battered and abused, all the safety gear missing etc but it still cuts sweet as nut after 7 or 8 years of roofing, shuttering, and yes finishing work. The only tools I've had repeated problems with are everything Milwaukee but never, ever like the Dewalt choppy's. If you're starting from scratch maybe go Makita in everything or dewalt, but not their chopaws.
I kinda assume the wobbly issues is caused by a bad batch of flanges. But oh my that gear issue straight out of the box is a first one for me, never seen anything like that. Also dislike the quality of brush holders on some of the Dewalt saws, they are just pinned down on some plastic. Have seen quite a bit of them with dislocated brush holders and if used too long that will damage the collector eventually.
I have 2 without that useless speed control and they've been working flawlessly for years. Sounds like quality control at Dewalt has become non-existent.
On the blade wobble... I'm questioning if it is due to the blade or bearings. If it's the bearings, yah, thats a problem. If its blade wobble: unless youre paying for higher end professional products priced a bit higher than this, where youre paying for higher tolerances, for most low to mid level saws, the blades they throw on there are cheaper consumer grade blades that run the risk of some mild wobble. Everyone I know operating saws like this plan on also buying a higher end blade as well & switching out the blade. The rest of your concerns are concerning. But blade wobble at this level on factory blades the wobble is not entirely suprising. That's why those pro's I know plan on buying a better blade as part of the upfront cost.
I had a DeWalt table saw with a weak motor crackling and sparking straight brand new out of the box I had it replaced they were really sorry 2.5years later sent it just right now had it repaired they put it back together wrong sent it out today again nightmare
Yes DeWalt has gone down hill ive got the 12" chop saw and 10" table saw which i bought six years ago and they've been champs. But as always companies try to save a few dollars for the profit and ruin a good thing. The 12" flexvolt saw has been burning up motors for years and DeWalt doesn't care.
I saw someone complaining about the flexvolt saw. There appears to be a design flaw that if plugged into the mains, it screws the motor. It seems that run on battery only they are okay ... maybe?
Taking a once reliable brand name and cutting so many corners that you turn the product into 💩 really doesn't seem like a sound marketing strategy to me. Yet so many companies seem to be doing it..
It's not unusual to get a run of bad units off a production line, but for those to actually make into the field and to a customer is disgraceful quality control.
Hi dean hope you are well here’s one for you have you ever come across a DW965 type 1 12V angle drill god it weighs a ton not got inside it yet no power battery dead found this in my neighbours loft have no charger for it would rather convert to li on if cheaper I welcome your knowledge and help on this one sir
Fuk that Dean what a barrel of shite they’ve became. I’ve had my 12” Bosch for about 9 years now and all I’ve had to do a few times is do fine adjustments on blade straightness. But to be fair that’s probably more my fault transporting it. Unfortunately you end up with an irate customer because you’ve sold them the machine that lasted 15 seconds 🤦🏼♂️
Disgusting quality control. The new brushless motor tools have become throw away tools,not worth the price to repair anymore. Motor, trigger and terminals all one unit ,cant be serviced individually.
Im legit convinced every brand makes 2nd rate garbage for Europe, im Canadian and ive never seen problems like any of what you get in from tools here and ive seen tools that live outside on the ground.
I didn't know that. The one think I like of Stanley are the standard safety boots, comfier than the DeWalt boot... though will they now be the same?? 😅
@@briannewton3535 yeah, fairly recent change i believe. I now see stanley have released a range of electric home tools now, look fairly fimilar in shape too. Biggest give away is old dewalt was mexico made, new stuff is chinese. I sell these for my job lol.
Chinese crap. I made the mistake of buying a dewalt 54v strimmer just under £400 last week, it lasted 5 minutes and stopped working, sent back and I'll get my money back
Lol German engineering in the last 10 years is as bad as that stuff from China...in fact some of the cheap Chinese power tools are better.. I got a 255mm draper I no cheap crap but hey it works and cuts brilliantly...as for drills I did use decals but thay turned to junks now so I use makita now all my power tools are makita but my saw
You both right and wrong I agree that no body like Made In China because so many people thinh that Made In China always bad products , but outside there still some good or even nice brand tool from China such as Dongcheng DCA DCK , or even Chervon company ( Skil saw , Flex , Ego , Devon ) although some good China Brand can't compare to big brand , but for the price and quality , so good for what you paid
DeWilt
You’re doing the Lord’s own work protecting us from this crap
Took me 5 tries to get one that didn’t stutter when it started and finally one that started fine is still low on power compared to my old 12”dewalt, it’s getting fixed and brought out of retirement
Been a carpenter for 30 years and always used elu and then dewalt untill 4 years ago when I bought a flexvolt 305 saw and was worst days work I ever did firstly the mains adapter blew it up so when in for new motor it then came back with a blade wobble and brake did not work very long story short sold it and got makita 40v saw which I love and the festool for fine work . Still use dewalt battery platform and touchwood not had a problem with screw guns or other tools thank god
I've read a few stories about the flexvolt burning out when connecting to mains electricity, Also sending broken kit to dewalt the dewalt 'fixit' crew fecking their tools, by breaking it more, and denying they broke things and unwilling to put things right. I'm like you I have Dewalt cordless drills, and they are holding up okay. My only Festool kit is my Domino 700, which has done a lot of work for me, and I do love.
Agreed. 37 years a chippie now, had the fokkin lot but mainly dewalt now and they're fine. Never have, never will buy a dewalt choppy though. The old Elu's were Swiss made and built to last but never like the Dewalt choppy versions. I have a corded Makita 305mm/216mm choppy and it's a belter - albeit ragged and dogged to fuck.
why the hell would you ever need a saw with a speed controll never once in my 15 years have i ever looked at my chop saw wishing it had speed controll
I know that seems very odd to me as well!!
Would speed control be for fine carpentry
Metal cutting maybe?
Slower speeds on some hardwoods will prevent burning. Maybe less of a problem with saws, but with my router I really notice the tendency for burning. I love the speed control on my Makita trim router.
The same with modes on an impact driver and auto start with a jigsaw.
Plunge speed is the same as using your finger on the variable speed trigger.
You should be able to buy a specific driver for self tapping screws for an impact.
Being proficient using any tool cannot be overcome with modes.
Like the idiot launching trapped cuts on a tablesaw, while only holding onto the offcut.
I respect you putting your money where your mouth is.
It surprises not that these get past QA but that there clearly is no QA.
Such a shame. I got my DWS780 about six months ago, and it was missing a roller on the blade guard. the supplier (Toolstop)sent me a pair of rollers and serrated clips, meaning I didn't need to send it for a warranty repair the team over there made this fix painless for me. Better than DeWalt as I got no response at all from them when I contacted them with regard to my issue. Thankfully other than that it runs nicely... for the moment. Such a shame and a disgrace. I'm not brand loyal, I have Makita and Bosch tools also, I get what I feel is the best tool for me. I'm seeing others having problems with DeWalt service also, so something to keep an eye on.
Glad I went for the Bosch 12” instead, looked at this too
Sounded like the second one had the same 220v voltage regulation but was just running at 110v. Making it just run half speed. I'll bet you if you just took the second one and put a 220 plug on it then it will run the right speed.Dunno why anyone would buy this saw. You can get the Bosch which is just an amazing saw for almost the same price. Also doesn't need extra space behind it. In america the Dewalt is $649 and the Bosch is $699 at home depot or lowes.
I got a truck starter from a parts house that was bad like that !
Toke it back and made them test 4 more off the shelf before I carried the 5th one that tested good home !
Just because it’s new in the box does not mean it good to go .
No wonder they are almost 50% less in price than Hitachi(Metabo), Makita and Bosch in 12" compound versions. Outsource and cheapening equals CEO bonus!
I’ve been a joiner for 34 years in the USA and the north of Ireland and have used all brands of mitre saws in my work and I have found the best all round saw from roofing to finish work is Dewalt 12” mitre and the strongest! Makita 12” can’t do as much or as well and much larger and heavier would not take one for free.Dean you would know which brand sell the most?
Dewalt normally make good mitre saws, have only good experience with them
And I would completely agree with you. That's why we always stocked the dewalt 12inch only. Never the makita.
But this is a joke. We cannt even sell these dewalt saws.
Customers just leave them back because they don't function as a 1000 euro miter saw.
This is a problem we have seem only in the last month or 2 with brand new saws.
@@deandohertygreaser is the DWS779 model equally or less problematic than this DWS780?
Im slowly migrating to Makita and Bosch, DeWalt is a shadow of what it once was.
Shouldn't really be surprising as Stanley black and decker is really good at what they do, and what they do is cut costs.
This is sad to see as dewalt have historically made the best mitre saws on the market. used them for ten years and never had an issue. from busy workshop environments to site work they used to be really robust and accurate…. Looks like the new ones are being built to a lower standard. such a shame!!
"Greed is going to distory thier reputation."
I'm glad i bought a Makita.
I have the 780, and the blade has sideways play in it from when I bought it, I sent it back to Dewalt in Utah 2 times still has the wobble, piece of junk, I have owned about 6 sliding saws in past from Festool to Hitachi and Dewalt, never had a blade where the housing moves when you grab the bade and move it side to side. Does your have blade play in it?.
Id be checking the blades for bends\warp before condeming a tool for spindle bend. Awfully hard to bend the spindle but real easy to throw saw in bed of truck & easily bend a blade, especially a 12" one at that. Idk, this is one of their most popular saws being made for years, I find it hard to believe they're all bad today but they are probably being made in China now, so there's that!
It's also had to bend a blade. Mort of the time it the back flange that holds the blade. But that's not the problem here. Iv tried replace the flanges myself. No good.
I don't actually think the spindle is bent. More it's not mounted true.
Dewalt have change something with the way these are now made. And the build quality is paying the price.
This was the only 12inch saw we ever stocked. It's the main seller. But we cannot sell them now like this.
This is only new saws to be clear, ones on sale now. It's a very recent problem
@@deandohertygreaser I sent mine in 2 times, the first time they replaced the washers, told them not fixed blade housing is loose, the second time they said they replaced the housing and it still does it, what are you going to do, crapy saw that they can't fix.
@@tdotw77 The housing moves, you can see it when you wiggle the blade, not a bent shaft.
@@deandohertygreaseryou mentioned it's a very new problem. Could you possibly fill us in on which year(s) we're looking at here? 22, 23, 24?
Dewalt and Milwaukee... utter joke of a "high quality" tool brand.
I run Makita and Bosch. Never had a problem with them that was not a simple matter due to just wear and tear.
Makita and Bosch are also some of the few brands that havent sold out ot a big conglomerate and sourced everything out to the lowest bidder in China. They do produce in China though but usually its the cheap n cheerful stuff they exclusively make in China.
I have Bosch tools Made in Malaysia and even Germany aswell, Makita made in UK and Romania (They seem to have established a large factory for all sorts of Rotary Hammers and Demolition Hammers there).
These days I run more and more Makita because their price to quality to performance ratio beats Bosch and Bosch has a smaller selection of tools.
I got one yesterday on sale that was not in a box but the display one at my local Peavey Mart.
Fair play lad dewalt junk that's a nightmare
DeWalt 54v cordless miter saw has a problem where it burns, when used with mains adapter, well known in company repair shops, but there no warning on that adapter.
With us been in Europe wouldn't Bosch be the go to brand for us considering we could get parts in from Germany?
Bosch and Makita.
Mine works great....but it is 5 or 6 years old. I dont have that speed knob.
What repair would you recommend for the slower motor speed? Is it the arbor? Mine is out of warranty and as it was my first ever saw I didn’t really know it was faulty until it’s too late.
I've got 712 and it serves well.
Is it the products produced for the European market? I’ve been looking at others assessing this model but they’re out of the US and those seem to be fine.
Jesus Mary and Joseph! I borrowed a Dewalt Mitre about 10 years ago and thought is was a fantastic tool - but it seems that times have changed!
Get yourself a digital rpm tachometer- not expensive and you'll be able to see what the rotational speed of anything is.
@@Look_What_You_Did the meter is though.
Simple solution, they should buy the evolution s355mcs awesome tool non of these decrap issues its always the same stanley crap and decker rubbish
Down to quality control purling,bought a Makita 305 and problem in turntable had to be returned for repaire and they dident do a great job
Speed control for fine carpentry?
Such a shame, shadow line idea is brilliant. I have a Festool Kapex, laser lines nowhere near as good as DeWalt shadow line, which I had before (780 earlier variant).
Edit: I wonder if the blades are warped or if the spindle is caddywompus
It's the spindle
I'll give you a fiver for the lot 🙂 collect first thing Tuesday
What mitre are u supposed to get now? The makitas are a bit expensive and not as powerful.
That's a shame as I was considering upgrading to that saw with the xps. How about the dws727? Does that have similar problems?
I think he is just saying, all dewalts are crap. I know they use cheap china bearings which dont last, makita use nsk i’m 99% sure
Sometimes wobble can be fixed with lapping an uneven arbor flange and nut.
Should it be fixed at the factory ,absolutely.
But a much easier fix then a table/fence out of level or plane.
Tried replacing the front and back flange but, no good. The wobble seems to be in the blade spindle
@@deandohertygreaser oof,yes that isn't great.
Sometimes the blade is the problem of the wobble
I lost faith in Dewalt three years ago , changed to all Makita and have never looked back
Same here. I’m from the states and everyone runs default and Milwaukee. I bought a few Milwaukee tools and they’re just as bad.
I have a van full of Dewalt tools of all types re carpentry and joinery. By and large, they're alright and economical enough however, I have never rated Dewalt chop saws for a number of reasons and I have a corded Makita 305mm/ 216mm blade which is buggered, battered and abused, all the safety gear missing etc but it still cuts sweet as nut after 7 or 8 years of roofing, shuttering, and yes finishing work. The only tools I've had repeated problems with are everything Milwaukee but never, ever like the Dewalt choppy's.
If you're starting from scratch maybe go Makita in everything or dewalt, but not their chopaws.
Again😮.. hope they wached this... Uu i'm happy with Bosch tools...not strongest no fastest but works like "Switzerland watch"..
Should put a black and decker sticker on them 😐
Glad I passed on the DeWalt 780 saw. Bought a Bosch.
To think that dewalt took over a world class reputation from the ELU brand they bought back in the day. 😳😳
I kinda assume the wobbly issues is caused by a bad batch of flanges. But oh my that gear issue straight out of the box is a first one for me, never seen anything like that.
Also dislike the quality of brush holders on some of the Dewalt saws, they are just pinned down on some plastic. Have seen quite a bit of them with dislocated brush holders and if used too long that will damage the collector eventually.
I have 2 without that useless speed control and they've been working flawlessly for years. Sounds like quality control at Dewalt has become non-existent.
Probably made in China
Dewalt doesnt seem to care about their quality anymore.
On the blade wobble... I'm questioning if it is due to the blade or bearings. If it's the bearings, yah, thats a problem. If its blade wobble: unless youre paying for higher end professional products priced a bit higher than this, where youre paying for higher tolerances, for most low to mid level saws, the blades they throw on there are cheaper consumer grade blades that run the risk of some mild wobble. Everyone I know operating saws like this plan on also buying a higher end blade as well & switching out the blade. The rest of your concerns are concerning. But blade wobble at this level on factory blades the wobble is not entirely suprising. That's why those pro's I know plan on buying a better blade as part of the upfront cost.
It is not the same dewalt like 15y ago, nowadays tools from dewalt are crap😢
I had a DeWalt table saw with a weak motor crackling and sparking straight brand new out of the box I had it replaced they were really sorry
2.5years later sent it just right now had it repaired they put it back together wrong sent it out today again nightmare
Havent really found a mitre saw that doesnt have an issue. Even festool isnt spot on.
Yes DeWalt has gone down hill ive got the 12" chop saw and 10" table saw which i bought six years ago and they've been champs. But as always companies try to save a few dollars for the profit and ruin a good thing. The 12" flexvolt saw has been burning up motors for years and DeWalt doesn't care.
I saw someone complaining about the flexvolt saw. There appears to be a design flaw that if plugged into the mains, it screws the motor. It seems that run on battery only they are okay ... maybe?
Taking a once reliable brand name and cutting so many corners that you turn the product into 💩 really doesn't seem like a sound marketing strategy to me. Yet so many companies seem to be doing it..
This vlog is finished and a dont seeing a thing that you did to this machine?😂😅😂😅
What the hell happened dewalt..? they were the go too saw after they bought E lou .
It's not unusual to get a run of bad units off a production line, but for those to actually make into the field and to a customer is disgraceful quality control.
And even worse is having them go in for repair and coming back broken again.
I've never seen a miter with a speed control
Different speeds because they’re different voltages same with the table saws
Not a cheap saw either!
Hi dean hope you are well here’s one for you have you ever come across a DW965 type 1 12V angle drill god it weighs a ton not got inside it yet no power battery dead found this in my neighbours loft have no charger for it would rather convert to li on if cheaper I welcome your knowledge and help on this one sir
Looks like there actually a recall in 2022
The quality of DeWalt tools has gone down the sh*tter.
For a "premium" tool brand with a higher price their service performance has been abysmal!!!
Fuk that Dean what a barrel of shite they’ve became.
I’ve had my 12” Bosch for about 9 years now and all I’ve had to do a few times is do fine adjustments on blade straightness. But to be fair that’s probably more my fault transporting it.
Unfortunately you end up with an irate customer because you’ve sold them the machine that lasted 15 seconds 🤦🏼♂️
That's a manufacturing fault. They are scrimping to save a few pennies. Sad news really.
Looks like someone had more than a 'day off' at the factory...
That I would understand. But how do we get 5 of the bad ones in a row from 2 suppliers.
Wow that's utter 💩brand new & already needs repair glad I've seen this dean next will be a makita 👍👍
That's shocking
Disgusting quality control.
The new brushless motor tools have become throw away tools,not worth the price to repair anymore. Motor, trigger and terminals all one unit ,cant be serviced individually.
Im legit convinced every brand makes 2nd rate garbage for Europe, im Canadian and ive never seen problems like any of what you get in from tools here and ive seen tools that live outside on the ground.
Dewalt was sold to Stanley a while ago, Im going to assume this is a stanley grade product now.
Garbage products now unfortunately
I didn't know that. The one think I like of Stanley are the standard safety boots, comfier than the DeWalt boot... though will they now be the same?? 😅
@@briannewton3535 yeah, fairly recent change i believe. I now see stanley have released a range of electric home tools now, look fairly fimilar in shape too.
Biggest give away is old dewalt was mexico made, new stuff is chinese.
I sell these for my job lol.
Cant believe de Walt have produced such a poor quality tool
From Dewalt to Fewalty.
Strange I have no hassles and Makita in this country South Africa is horrible prices are extream Dewalt I have better service.
Chinese crap.
I made the mistake of buying a dewalt 54v strimmer just under £400 last week, it lasted 5 minutes and stopped working, sent back and I'll get my money back
30 day return. Get rid of it
@@deandohertygreaser
Delivered by DPD on the Monday collected by DPD on the Thursday 🤣
$hiety quality control an a $hiety product.
Chinese made rubbish. Shame on you DeWalt
Always trying to save a few pennies with no regard for quality or reputation. DeFalt 😂
Lol German engineering in the last 10 years is as bad as that stuff from China...in fact some of the cheap Chinese power tools are better.. I got a 255mm draper I no cheap crap but hey it works and cuts brilliantly...as for drills I did use decals but thay turned to junks now so I use makita now all my power tools are makita but my saw
Dewalt as been some of the best miter saws for quite some time, so wtf are they doing?
Nothing but junk,unreal
Dewalt are finished!
Totally agree guys never buy Chinese tools if I can help it they can copy but nothing lasts tell me if I’m wrong guys
Tools are all Chinese now. Some are bad, some good.
You both right and wrong
I agree that no body like Made In China because so many people thinh that Made In China always bad products , but outside there still some good or even nice brand tool from China such as Dongcheng DCA DCK , or even Chervon company ( Skil saw , Flex , Ego , Devon ) although some good China Brand can't compare to big brand , but for the price and quality , so good for what you paid
@@QuockhanhPham20: "no body like Made In China"
Can't tell for anybody but I like things "Made in China".
@@AAaa-wu3el As the great Labowski once said: "Well you do you, Man"
@@stefanbadass5357 Who is that great Labovski - a toolmaker?