⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
This symptoms apply for any GDI internal combustion engine, my car started dying randomly on me, it got worse with time. Best thing to do is scan it with a proper OBD tool and the car will give you the right codes if the ECU is fine. These high pressure fuel pumps are expensive, over 1K USD for most if not all models that use the GDI system.
Well.... Thanks for the video, but i was hoping to find some ways to test the high pressure fuel pump. You said that you made a different video for that, but it looks like you forgot to put a link to it... I need to know how much fuel (high) pressure these need to start and idle.
well on my 2013 Kia Optima is looses power after about 30 35 minutes of driving, ...but when you turn it off for about 15-20 minutes it runs fine again. (and I get no codes on my dashboard)
Thank you for the video. I had a problem with my 2016 Sonata recently: Car dies on road while driving. So I had it towed!! And it didn't even crank. Mechanic replaced the starter now it cranks but won't start. What should I get checked next? Please help!!
Hi my friend i see your video..i have a problem with misfire on my kia rio 2013 i change spark plug i change fuel pump catalytic injector stul misfire ..but how i will know the cam follower is bad
I have a 2000 Ford F-150 4 x 4 5.4 l what's happening is you turn the key on you try to start it and it goes right and then stops and then stops what module would keep the truck from turning over😊
Hi I Hope you answer my question please, I own a 2012 Kia óptima and It has a problem that i cant found, when I turn of after 30 minutes i cant start again, i have to put some start fluid to start engine, after that the car run very good with no problems, sometimes i dont need star fluid, but i think It is when the car is parking for two hours or one day tanks
@@benromer1454 my problem is rare, I replace fuel pump, hight presure pump, intec, fluel presure sensor, temperature sensor, batery and control batery, now i gonna check valvs i read some information they can have deposit for the kind of inyection.
@@leonardsolt6543 any check engine light? Normally if it is a dead fuel pump it won't start, it will crank but no momentary idle. If your vehicle idles then cuts off it could be another issue
@@leonardsolt6543 These factors are important and in depth diagnosis is important to help you avoid buying incorrect parts and throwing money all over. It Could be a fuel pump issue if it's not starting or if it starts and cuts off or doesn't start it could also be a crank sensor too? Crank sensor will typically throw a check engine light that is why I asked. Bad fuel pumps normally will not throw a light as they typically fail all at once and then you have no drive cycle or run time for the ECU to bridge out a code. So if you have a Check engine light then goto an auto parts store auto zone or advanced auto parts and ask to have the codes scanned then write them down and Google it see what code(s) you have. If you have money and want to help yourself in the future go on Amazon and buy an icarsoft obd2 scanner. It is one of the better ones they have a nice one that looks kind of like a tablet I paid $109 for mine they also have an icarsoft one that has a smaller screen it's like $50 reads and clears codes. To fix the codes you normally can't just clear it and not have it pop back on, you normally need to replace a sensor fix a vacuum leak or do some mechanical/electrical replacement work to fix an issue.
Hi , I'm fixing a w205 c300 2015.It is a theft recovery ,high pressure pump was missing .I put a new one , the engine is clicking and I have pressure problems on start .This car comes with camshaft follower? I have autel pro mk808 : codes UO12087 - P053F94 - P1CCF00
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
Hello guys bmw n62 4.4l engine misfire everytime I start the car when it hot or cold everytime for Amin and give p0024 and p0021 code any suggestions?
One thing you forgot to add is oil dilution or contamination from leaking fuel from the pump plunger
This symptoms apply for any GDI internal combustion engine, my car started dying randomly on me, it got worse with time. Best thing to do is scan it with a proper OBD tool and the car will give you the right codes if the ECU is fine. These high pressure fuel pumps are expensive, over 1K USD for most if not all models that use the GDI system.
Well.... Thanks for the video, but i was hoping to find some ways to test the high pressure fuel pump. You said that you made a different video for that, but it looks like you forgot to put a link to it... I need to know how much fuel (high) pressure these need to start and idle.
Thank you guys, you saved me a few times already.
Can the high pressure fuel pump cause a no start condition?
I have a Hyundai and it doesn’t go over 40 miles and it’s jerking . Does this have something to do with the recall????
well on my 2013 Kia Optima is looses power after about 30 35 minutes of driving, ...but when you turn it off for about 15-20 minutes it runs fine again. (and I get no codes on my dashboard)
hey my kia soul is doing the same thing, did u ever happen to figure out what was wrong?? im thinkin maybe the high pressure fuel pump?
Could this affect the compression on the cylinders ?
I have a 2013 Hyundai Equus and I would like to know what tools do I need to change it
Thank you for the video. I had a problem with my 2016 Sonata recently:
Car dies on road while driving. So I had it towed!! And it didn't even crank.
Mechanic replaced the starter now it cranks but won't start. What should I get checked next? Please help!!
Hi my friend i see your video..i have a problem with misfire on my kia rio 2013 i change spark plug i change fuel pump catalytic injector stul misfire ..but how i will know the cam follower is bad
I have a 2000 Ford F-150 4 x 4 5.4 l what's happening is you turn the key on you try to start it and it goes right and then stops and then stops what module would keep the truck from turning over😊
Would this cause to much fuel flow on a 2016 explorer?
What about after turning the key off? The engine still runs and slowly turns off
I have a veloster 2013 with a code P2191 how can fix it ?
Have a p0092 code on this exact engine. What could be causing it?
Can this pump leak gas in to the engine oil?
Yes
Hi I Hope you answer my question please, I own a 2012 Kia óptima and It has a problem that i cant found, when I turn of after 30 minutes i cant start again, i have to put some start fluid to start engine, after that the car run very good with no problems, sometimes i dont need star fluid, but i think It is when the car is parking for two hours or one day tanks
Classic fuel pump
@@benromer1454 my problem is rare, I replace fuel pump, hight presure pump, intec, fluel presure sensor, temperature sensor, batery and control batery, now i gonna check valvs i read some information they can have deposit for the kind of inyection.
So is this part the fuel pump I’ve never seen a fuel pump look like that
That part is the high pressure fuel pump, theres a low pressure fuel pump in the gas tank as well, which is the more common one
Благодаря ти!
On 1:47 the piece he’s holding, there’s like a pin or screw thing that caps it off. Anyone know why it would pop out everytime the engine is started?
i have a 2011 hyundai sonata with the same issue but havent replaced the high pressure fuel pump
Does the 2.4 GDI have two fuel pumps?
All direct injected engines have 2 pumps. 1 in the tank and 1 on the engine
I have a 2017 Hyundai accent. I replaced the high fuel pump regulator and fuel pump. It want stay crank. Can you please give me some advice?
Does the car crank then turn on and run then shut off? or does it just crank and not start
@@conormcgregor5460 yes it starts but it cuts off.
@@leonardsolt6543 any check engine light? Normally if it is a dead fuel pump it won't start, it will crank but no momentary idle.
If your vehicle idles then cuts off it could be another issue
@@leonardsolt6543 These factors are important and in depth diagnosis is important to help you avoid buying incorrect parts and throwing money all over.
It Could be a fuel pump issue if it's not starting or if it starts and cuts off or doesn't start it could also be a crank sensor too?
Crank sensor will typically throw a check engine light that is why I asked. Bad fuel pumps normally will not throw a light as they typically fail all at once and then you have no drive cycle or run time for the ECU to bridge out a code.
So if you have a Check engine light then goto an auto parts store auto zone or advanced auto parts and ask to have the codes scanned then write them down and Google it see what code(s) you have. If you have money and want to help yourself in the future go on Amazon and buy an icarsoft obd2 scanner. It is one of the better ones they have a nice one that looks kind of like a tablet I paid $109 for mine they also have an icarsoft one that has a smaller screen it's like $50 reads and clears codes. To fix the codes you normally can't just clear it and not have it pop back on, you normally need to replace a sensor fix a vacuum leak or do some mechanical/electrical replacement work to fix an issue.
Hi , I'm fixing a w205 c300 2015.It is a theft recovery ,high pressure pump was missing .I put a new one , the engine is clicking and I have pressure problems on start .This car comes with camshaft follower?
I have autel pro mk808 : codes UO12087 - P053F94 - P1CCF00
More than likely your follower is missing.Take your pump off and look see if there is one in there
Couldn't understand this guy, very bad accent and talks too fast. I wanted this info try using somebody that can speak clearly.
He speaks perfectly clear