Men , o had a 90 Cressida that was 7m auto ,then 7m manual w58 .then 7mgte / r 154 . Loved it till it rotten out from the rear suspension. Miss everything for her. I swapped the 7mgte / r 154 to a 92 volvo 240 wagon. Still working the glitches. Your headlights are Jdms. Nice to see someone keeps the spirit. I might ,depending on budget swap TO a 1 uz. Take care and nice builds!!!!
I like how you think, Yota V8 swap tugs my heart strings. Love that Cressida classy. Keep all parts Toyota as much as possible even the brake booster stays loyal.💯👍🏻
I'm doing a 2uz swap in my 87 mk3 supra but I need a pan that fits, motor mounts and a 3uz intake, oh and sc400 manifolds. Either that or LS swap it lol
I have a 1981 corolla and I been thinking of swapping out the 5mge swap I have in it and putting a 1uz vvti. You got any write ups on doing the electronics of it ? I'm very familiar with working on the engine but the wiring has me not wanting to do the swap lol.
How's the 3uz engine with the 1uz ECU and harness holding up? I mean have you had any issues with the 3uz performance so far in this setup? And how long have you ran on this setup? Thanks.
@@maxwolthuis a RUclipsr (Tavarish) swappped a 3ur into a sc300. It looked like a pain in the ass. Crossmember modifications were necessary. The motor looked huge.
1uz from a LS400 because it has the front sump oil pan you need. You will need the oem exhaust manifolds from the sc400. The exhaust manifolds from the other chassis are too wide.
@@yotarip thanks, Ive heard people say they used older toyota pickup boosters upside down but still had to hammer in a little ding for clearance did you have any issues with that using the 96 tacoma booster?
Orlando Muñiz thanks man. The hilux is mostly good. I found a leak around the windshield. I think I need to do some rust repair around the window channel again.
@@yotarip awe man that sucks, your build wants me to get another pickup and stick a 3uz in it. My yota right now has supercharged 5vz that i swapped last year. Keep up the good work thou!
I wish someone would write a detailed walkthrough. I'm working on a 3uz for an IS300. If you have any useful hints, feel free to hit me up on Facebook.
Extreme luck. There was a Japanese auto dismantler selling parts on ebay years ago. The seller was selling these bumper for $300 SHIPPED from Japan. Even shipped the bumper express and got it in 4 days! I wish I had purchased the rear bumper when I had the chance but I did get the JDM X8 headlights with built in fogs.
No. You do not need to cut the firewall at all. It fits perfectly. I am using the Cressida driveshaft. The transmission is an automatic transmission from a 2001 IS300. The Cressida driveshaft fits.
Yes. The Supra has a GS400 ecu that has a immobilzer bypass circuit installed by All4swap.ru .The cressida is using the original immobilizer circuits like what I show in one of my other videos.
I like this. You did a 1/3UZ into a third gen Supra and a Cressida. Mad respect for you.
Dude please! You have to do a write-up of both cars, parts and all.
I'LL PAY
D Notorious B yes
Men , o had a 90 Cressida that was 7m auto ,then 7m manual w58 .then 7mgte / r 154 . Loved it till it rotten out from the rear suspension. Miss everything for her. I swapped the 7mgte / r 154 to a 92 volvo 240 wagon. Still working the glitches. Your headlights are Jdms. Nice to see someone keeps the spirit. I might ,depending on budget swap TO a 1 uz. Take care and nice builds!!!!
Holy shit, mad respect figuring out the weird compatibilities of different Toyota parts!
I like how you think, Yota V8 swap tugs my heart strings. Love that Cressida classy. Keep all parts Toyota as much as possible even the brake booster stays loyal.💯👍🏻
two of my favorite Toyota i cant wait to see more of these cars. keep it up bro.
Badass dude! Can never go wrong with V8 powa!
Nice to see you active on here again.
chuck blankenship thanks chuck. Stayed busy playing with the Toyota’s. Just started posting vids again.
@@yotarip glad to have you back. Definitely an inspiration to get off my duff and get my swap finished
You sir are on a whole new level
This is tight!! Keep up the good work homy😎✌
Greetings form the other side of the world
Both cars are awesome!!! Smart guy👍
Bro is a real one💪🏿💯
Super legit clean work here sir. How and why do you have any dislikes on this vid???
You're a legend my dude. Respect
dope as fuck, you got good taste my friend.
This is some proper stuff. 👍🏽👍🏽
Awesome cars and engines. Great work!
What part in VA!? I have an 84 Cressida! Fredericksburg, VA 🤙🏾 good work man! Beautiful cars!
Great information!
UZ everything. Dope cars 👍
I'm doing a 2uz swap in my 87 mk3 supra but I need a pan that fits, motor mounts and a 3uz intake, oh and sc400 manifolds. Either that or LS swap it lol
I love your work
So on the x8 how did you get the rpm Gage to read correctly
Nice cars brother.
What oil filter housing are you using on this swap? I'm working on the same thing in my cressida. Cheers!
Amazing this is chanel ..suces always mr
I have a 1981 corolla and I been thinking of swapping out the 5mge swap I have in it and putting a 1uz vvti. You got any write ups on doing the electronics of it ? I'm very familiar with working on the engine but the wiring has me not wanting to do the swap lol.
Oh I love the Cressida bias af. Much different from the 1uz?
Great video, did you use the 1uz vvti throttle body to use cable throttle and avoid drive by wire that 3uz uses?
Yes. I also used the 1uz vvti ecu, engine harness and coil packs for a 100% bolt on solution
@@yotarip awesome, thank you for the information
This is dope. Both of em
Dude, my favourite motor, nice work. When you gonna supercharge it?
Lmfaaoo tell me why when my 7m's head gasket blew i pulled the engine and immediately thought about the 3uz lmaoo
U stay busy on the low...😉
Michael Giles Yeah man. It was 60+ degrees and no mosquitoes. Had to put in some work on the Cressida.
Where can I locate swap mounts for Cressida?
Is it possible to put the 5 speed auto and 3uz into a mk3 like this cressida?
How's the power performance of this setup compare to a factory GS400? And how it compares to a factory GS430?
Yo, do all 3uzees have VVTi?
I'm doing a 95 1uzfe into my 89 Cressida. Any wiring tips you can give?
dope
Im doing a 3uz swap into a gx81 mark 2. w55 box etc etc. Is it possible to run the 1uz cable throttle with the stock 3uz ecu??
What oil pan do you run in them?
How do get it to start ? Do you have a gs400 key With the ecu
How's the 3uz engine with the 1uz ECU and harness holding up? I mean have you had any issues with the 3uz performance so far in this setup? And how long have you ran on this setup? Thanks.
Tony Truong Been running strong for three years now. Absolutely no worries issues at all with running the 3uz with the 1uz electronics.
@@yotarip Thanks for the reply. I am going to do the same setup.
@@yotarip what about the e-shift. Were you still able to retain the e-shift?
Will this work on my 2014 IS250? I want to use a 3UZ.
I wonder if If a 3ur would fit in a Cressida, is there a big size difference?
@@maxwolthuis a RUclipsr (Tavarish) swappped a 3ur into a sc300. It looked like a pain in the ass. Crossmember modifications were necessary. The motor looked huge.
@yotarip good to know, I’ll give it a go and make a YT series on it.
Do you have recommendations on swapping one into a 1984 celica gt?
1uz from a LS400 because it has the front sump oil pan you need. You will need the oem exhaust manifolds from the sc400. The exhaust manifolds from the other chassis are too wide.
Havent heard of people using an mr2 brake booster, is that what you used on the a70 supra?
TexasMudbug728 I used a 96 Tacoma booster mounted upside down. It bolts right in. The mr2 booster bolt pattern doesn’t match the Supra firewall.
@@yotarip thanks, Ive heard people say they used older toyota pickup boosters upside down but still had to hammer in a little ding for clearance did you have any issues with that using the 96 tacoma booster?
You know your child's.
Good stuff i enjoy all your videos, hows the hilux doing?
Orlando Muñiz thanks man. The hilux is mostly good. I found a leak around the windshield. I think I need to do some rust repair around the window channel again.
@@yotarip awe man that sucks, your build wants me to get another pickup and stick a 3uz in it. My yota right now has supercharged 5vz that i swapped last year. Keep up the good work thou!
Is your cluster such as tachometer working?
No. I doesn’t work with the Uz vvti electronics without a signal converter
Swag
I wish someone would write a detailed walkthrough. I'm working on a 3uz for an IS300. If you have any useful hints, feel free to hit me up on Facebook.
Any subtle (on the cheap) things I can do to the 3uz in my LS430 for some more peppy everyday driving?
Nitrous
Intake and tune
Aftermarket ecu will wake up the engine. Like 30hp
You can get a tune for the stock ecu that gives 20hp/tq and better throttle response. Although, it does require the immobilizer to be removed.
How did you get the gx81 bumper? Been trying for a year
Extreme luck. There was a Japanese auto dismantler selling parts on ebay years ago. The seller was selling these bumper for $300 SHIPPED from Japan. Even shipped the bumper express and got it in 4 days! I wish I had purchased the rear bumper when I had the chance but I did get the JDM X8 headlights with built in fogs.
You can run 1uz ecu on 3uz engine?
Yes. As long as you use the 1uz vvti ecu, wiring harness and throttle body. This is the setup on in my Supra. 3uz engine and 1uz vvti ecu.
Bro I literally want both these cars with 1uz swaps 🥲 I already have the cressida
This is goals 🫡🫡🫡
🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻
Can i install 3uz with transmission 3uz without cut fire wall and what you used drive shaft
What car are you putting the transmission in?
@@yotarip cressida
No. You do not need to cut the firewall at all. It fits perfectly. I am using the Cressida driveshaft. The transmission is an automatic transmission from a 2001 IS300. The Cressida driveshaft fits.
@@yotarip the 7m transmission it is same is300?..
ALWLEED 506 no. The Cressida transmission is a 4 speed and the is300 transmission is a 5 speed. They are not compatible
Where do you find these 3uzs I can't find any
jalen yellock I find them here in my local junkyards here in Richmond va. Pick them up for around $300
Guess I'ma make a trip up to VA then
So do you have a gs400 ECU w/immobilizer in the supra?
Yes. The Supra has a GS400 ecu that has a immobilzer bypass circuit installed by All4swap.ru .The cressida is using the original immobilizer circuits like what I show in one of my other videos.
Do you use the gs400 engine harness as well? Or is an ls400 harness easier?