I was sitting here so confused thinking I was missing something but it’s supposed to be spacers under the stand offs not after. I kept thinking misplaced another group of spacers that’s came originally with my mobo. Just take note, spacers go under standoffs and screw into mounting bracket.
just installed this piece of art on my full diy TUF GAMING PC build because the air cooling gave me 92 degrees celcius with gaming. Now with this i get a nice 50 degrees wich i feel much more comfortable with. im waiting for a vertical bracket for my 3060TI TUF GAMING video card.
Best In Install !! Great closeup. Excellent order of operation. No background discussions off topic. No sloppy handling of CPU. Great you had performance testing, but left out Star Citizen...
Theres already a mounting bracket for you to put in the standoff screws on the am5 platform which i used here. Might be a different scenario for other chipset.
Intel you have to change the backplate with the provided one which is why there is a difference. Then the spacers and screws last before mounting the unit
Thanks for the guide. I just received this cooler and the manual is not too good for someone who has never installed this kind of a cooler. For starters.. I have no idea which direction the fans blow and the manual doesn't explain it. There is no indicator on the fans so I have no idea which way to install them into the radiator. I need to install the radiotor in front of my case.
@@tumeekay3113 best to screw the standoffs all the way in mate and the spacers firmly in place. You might be okay now but it may cause issues down the line.
@@JegsTV Thanks, it's just I wasn't able to screw the whole thing in by hand and I don't have a screwdriver with a socket of that kind. What screwdriver do I need for that kind of standoff anyway?
The way I see it there's nothing wrong with the centre dot application of TP as the contact plate will eventually spread the paste out as in a short period of time, not all the time the whole spatula spread method is ryt as it barely leaves any room for spread and in turn causes issues later.
@@JegsTVIt's physically impossible to get the optimal amount of paste with that pattern. But sure bro, why improve when you can just be in a denial. 👌
@@penttijakonen3817 ive built hundreds of pc using that thermal paste application method. No overheating, no failure. But sure let the random experts on the internet tell you youre wrong 👌
I was sitting here so confused thinking I was missing something but it’s supposed to be spacers under the stand offs not after. I kept thinking misplaced another group of spacers that’s came originally with my mobo. Just take note, spacers go under standoffs and screw into mounting bracket.
just installed this piece of art on my full diy TUF GAMING PC build because the air cooling gave me 92 degrees celcius with gaming. Now with this i get a nice 50 degrees wich i feel much more comfortable with. im waiting for a vertical bracket for my 3060TI TUF GAMING video card.
Best In Install !! Great closeup. Excellent order of operation. No background discussions off topic. No sloppy handling of CPU. Great you had performance testing, but left out Star Citizen...
Is it a best quality product and value for money
Great content!
Are you sure you put the standoffs in the right order? It's standoffs then screws in the manual.
Theres already a mounting bracket for you to put in the standoff screws on the am5 platform which i used here. Might be a different scenario for other chipset.
Btw, the spacer is different from standoff. You might be mixing up the two.
@@JegsTVCheck the manual online.
They have changed the order of the spacers.
Great content 👍
Intel you have to change the backplate with the provided one which is why there is a difference. Then the spacers and screws last before mounting the unit
Is the 240ml one good?
another great content bro
still not available anywhere :(
Just got mine on Amazon
great explain
Is it a 4pin or 3 pin rgb connector and also does it have to connect to a system/chassis fan header or the cpu fan header?
Thanks for the guide. I just received this cooler and the manual is not too good for someone who has never installed this kind of a cooler. For starters.. I have no idea which direction the fans blow and the manual doesn't explain it. There is no indicator on the fans so I have no idea which way to install them into the radiator. I need to install the radiotor in front of my case.
lc ii 360 vs lt720 ?
Forgot to place plastic collars in my build, should i re do it ?
If youre having the expected operating temperatures, then no need to place it. Just remember to put them when you repaste the pump block.
during full load, does this stand - out noise come from the pump ?
the noise is barely noticeable on my end. and i tested this with an open case. so for sure you wouldn't notice any noise if you have a closed case.
hey, is it bad that my plastic spacers are loose since i wasn't able to screw the standoffs all the way in
@@tumeekay3113 best to screw the standoffs all the way in mate and the spacers firmly in place. You might be okay now but it may cause issues down the line.
@@JegsTV Thanks, it's just I wasn't able to screw the whole thing in by hand and I don't have a screwdriver with a socket of that kind. What screwdriver do I need for that kind of standoff anyway?
hex screw. like this one. amzn.to/3z7krWt
@@JegsTV Thank you
That thing is pretty noisy :( And what type of pump connector used here? 3 pin or 4 pin? Can I reduce the noise level?
Can it cool a 13700kf processor?
Yes it can. :)
How about 14900kf?@@JegsTV
All tajt noise is from the pump? or fans?
can pls tell me if can change the logo on the pump with the cpu temperature?
Nope you cant.
ok thx@@JegsTV
3 PROCENT SAME LIKE NOTHING NO POINT BUY ASUS
RUclipsr leave out so much!
like what?
Bro ur thermal paste application sucks
Thats a perfectly fine amount of paste.
The way I see it there's nothing wrong with the centre dot application of TP as the contact plate will eventually spread the paste out as in a short period of time, not all the time the whole spatula spread method is ryt as it barely leaves any room for spread and in turn causes issues later.
@@anshumanbose7430 exactly. Bro is mad for no reason
@@JegsTVIt's physically impossible to get the optimal amount of paste with that pattern. But sure bro, why improve when you can just be in a denial. 👌
@@penttijakonen3817 ive built hundreds of pc using that thermal paste application method. No overheating, no failure. But sure let the random experts on the internet tell you youre wrong 👌