Great video! Last week I installed a Delta T3 fence on my 1990 Craftsman 113 table saw. What a difference! It's like a whole new saw. Next project; a zero clearance insert with a splitter. I'm having as much fun restoring (and upgrading) this old saw as I will have using it.
Thanks for showing this collaboration. Grettings from Puerto Rico 🇵🇷. I'll try to make it as soon as I can. This upgrade was awesome. God bless you too.
I’ve been looking for a fence for my Large table saw I purchased and of course no fence! Thanks for the link I really liked the video and I’m am now ordering a fence Thanks
Been scouring the internet because I have an ancient Delta Unisaw with a Biesemeyer fence and no rails. They don’t sell them anymore and I’ve been wondering if I could just make some rails and avoid scrapping the Biesemeyer fence. They’re old school but beefy and hard to break. Good video. I might just make my own as you did. Any problems getting that rail perpendicular to the blade?
Look at a 'wetblasting' kit. It basically attaches to your (gas engine-powered) pressure-washer wand, the water jet siphons a Tiny bit of sand through a hose from a bucket. Doesn't make a big mess of sand like a sandblaster would, but you can wash off many layers of paint or rust quickly. Won't warp thin metal like a sandblaster does either.
Wow, seeing how much work this was, makes me glad I spent the extra $100 for my Shop Fox Fence. Nice job on doing it but the pre-made one was way easier... Nice find on the saw!!!
Nice flute line. I picked up the sax in Jr high now in my sophomore. I play the clarinet. Does she have a IG account she performs on? She has a good form to play clarinet. U have a beautiful video. I luv all yr little segments & old school snl music. Nice work shop. I wish I had something like that to work on may hobbies & play my sax clarinet. I seen a few delta table saws for that price. I didn't know if it was good deal being the are $900-1300 tables working. I bought a cheap Jamaica saw. When after I assemble it the fence fell onto table popped off the tip of fence. I am looking for a reference video. My table is so low budget the instructions has pib sqeek pictures for a fleas eyes. Anywho I usually FF videos bit I enjoy all of yr video thk u much Daddy
Just by the way i try Build the american fence its just Great ok i make some more Fency Stuff but the Same Germans Build it like 3000$ best fence in the World but on the end bullshit
Great video! Last week I installed a Delta T3 fence on my 1990 Craftsman 113 table saw. What a difference! It's like a whole new saw. Next project; a zero clearance insert with a splitter. I'm having as much fun restoring (and upgrading) this old saw as I will have using it.
Thank you! Old equipment are a lot of fun to use. Good luck
Thanks for showing this collaboration. Grettings from Puerto Rico 🇵🇷. I'll try to make it as soon as I can. This upgrade was awesome. God bless you too.
Thank you for the comment! Good luck with all your projects
you did a great job and i really appreciated the way you walked through the process as well as the helpful information thanks
Thank you for the nice comment
I’ve been looking for a fence for my Large table saw I purchased and of course no fence! Thanks for the link I really liked the video and I’m am now ordering a fence Thanks
Thank. It’s a good fence. I recommend it. Good luck!
Been scouring the internet because I have an ancient Delta Unisaw with a Biesemeyer fence and no rails. They don’t sell them anymore and I’ve been wondering if I could just make some rails and avoid scrapping the Biesemeyer fence. They’re old school but beefy and hard to break. Good video. I might just make my own as you did. Any problems getting that rail perpendicular to the blade?
I was extra careful in getting the 3x2 tubing parallel to the saw top and didn’t experience any issues.
Good luck!
Look at a 'wetblasting' kit. It basically attaches to your (gas engine-powered) pressure-washer wand, the water jet siphons a Tiny bit of sand through a hose from a bucket. Doesn't make a big mess of sand like a sandblaster would, but you can wash off many layers of paint or rust quickly. Won't warp thin metal like a sandblaster does either.
I’ll check that out. Thank you
glad that cutting the cord didn't mean it was damaged!
Thank you. I was happy about that too
Wow, seeing how much work this was, makes me glad I spent the extra $100 for my Shop Fox Fence. Nice job on doing it but the pre-made one was way easier... Nice find on the saw!!!
Thanks for the nice comment. Good luck with your projects!
Nice flute line. I picked up the sax in Jr high now in my sophomore. I play the clarinet. Does she have a IG account she performs on? She has a good form to play clarinet.
U have a beautiful video. I luv all yr little segments & old school snl music. Nice work shop. I wish I had something like that to work on may hobbies & play my sax clarinet. I seen a few delta table saws for that price. I didn't know if it was good deal being the are $900-1300 tables working. I bought a cheap Jamaica saw. When after I assemble it the fence fell onto table popped off the tip of fence. I am looking for a reference video. My table is so low budget the instructions has pib sqeek pictures for a fleas eyes. Anywho I usually FF videos bit I enjoy all of yr video thk u much Daddy
To make your tabletop saw smooth and slick use wax I've seen this on video if you want to look this up
It also helps remove hair from the saw
Thanks sir
Good luck with your projects
Hello everything Great but why so super Heavy ??? Hello from Germany
I’ve got a big shop with big equipment…might as well make it heavy. Hello from Texas!
@@LewisRenovation of Course but if the slide is heavyer than the saw its Kind of
Just by the way i try Build the american fence its just Great ok i make some more Fency Stuff but the Same Germans Build it like 3000$ best fence in the World but on the end bullshit
Good luck with all your projects!
Just saw it well Good Look to you i work with a 1/100 mm on my Tablesaw its of Course no Need but ! Love from Germany
I'm so offended 😂😂😂 "Metric or standard" what does that even mean? It's Imperial or standard, get that right😅
Blame it on my public school education