Glad it worked, but at 4:38 you actually installed the rubber grommet backwards, the taper is made to pull it to center in the ceramic opening while the flat side would meet your washer, flat. Take care.
This install was performed precisely as per the manufacturers instructions. The drain is centered and there are no leaks. This was done correctly. Thanks for sharing your opinion though🙏
I’ve only ever seen them I one size fits all. If it were too long then yes indeed you would have to cut it down. Just make sure you file the edge down so you don’t get a buildup. Thanks for watching. Please like and subscribe
You are correct. However I’m not going to replace the whole sink. I was only having issues with the drain and stopper. Hair and slime likes to build up in the stopper style drains and I was pulling it apart every few months to pull the clumps out. I like This style of drain. Because it’s clog free. I only replace the parts I need to. Thanks for watching. Please like and subscribe
Omgsh dude. Thats what that was! "An overflow" Thank you!
You’re welcome. Thanks for watching. Please like and subscribe
I bought the same kind you did and I love it,Thanks again for the wonderful video.
Excellent work!
Thanks for the feedback. Please like and subscribe
Good Job!
Thank you! Cheers! Please like and subscribe
Best how to!
Thanks for the feedback
Great video !
Glad you enjoyed it. Thanks for watching. Please like and subscribe
Thanks
You’re welcome. Thanks for watching. Please like and subscribe
Thank you, your video is very good, it helped me put mine in.
You’re welcome. Glad it helped.
Glad it worked, but at 4:38 you actually installed the rubber grommet backwards, the taper is made to pull it to center in the ceramic opening while the flat side would meet your washer, flat. Take care.
This install was performed precisely as per the manufacturers instructions. The drain is centered and there are no leaks. This was done correctly. Thanks for sharing your opinion though🙏
Thank you so much!!!!!
You're welcome. Thanks for watching. Please like and subscribe.
Does the new steel piece come in different lengths, of would you need to cut it to fit into the P-trap?
I’ve only ever seen them I one size fits all. If it were too long then yes indeed you would have to cut it down. Just make sure you file the edge down so you don’t get a buildup. Thanks for watching. Please like and subscribe
Easy with this..I have metal thing
Thanks for watching. Please like and subscribe
are these drains all standard size
Yes it’s a one size fits all. Thanks for watching. Please like and subscribe
Bro you didn’t tell us how to put that thing at the bottom back together
Put what thing back together? I showed the whole install process. Everything was put together
senseless to have an overflow when you cant put a stopper in it to hold water
You are correct. However I’m not going to replace the whole sink. I was only having issues with the drain and stopper. Hair and slime likes to build up in the stopper style drains and I was pulling it apart every few months to pull the clumps out. I like This style of drain. Because it’s clog free. I only replace the parts I need to. Thanks for watching. Please like and subscribe
@@BillOfAllTrades2016 Thank you for explaining that.