For those wanting this this intake, it is the same kit as what AEM provides. The Mazdaspeed cold air intake was designed as a replica from the AEM cold air intake. It has the same piping routing, sensor placement, and everything. I believe the pod filters are different (you want the AEM dry flow anyway). The Mazdaspeed version is very difficult to find and is essentially a vanity item at this point. Mazdaspeed also made a copy for the NC Miata as well (again, same as AEM).
I drove it through some pretty torrential downpours and it seemed to be fine with the shield. Maintenance cleaning your filter can be done every oil change if you`re picky.
Does a 2011 mazda 3 gx sport hatchback with a 2.0l motor need need a flex pipe? My flex and cat is just starting to leak but can't really find a header with cat and a flex so that's why I ask about the flex and if you know any info on what I should put on it my ears are open
I just noticed you finally cleaned your engine bay lol. I needa clean mine up soon. Im just waiting fir it to get cooler cause its so damn hot and we in September and its still hot like wtf
@ColtonRichter Major facts, when I finally did it I'm just like chef's kiss. So beautiful amd especially since I also have a bunch of new parts under the hood.
I'd really want to put a CAI on my Mazda 3 but i have the Mazda 3 2005 petrol engine, the other type and it's very different and i don't know how, can you please make a video about it ?
@ Colton Richter have you found running a cold air intake on your Mazda 3 makes your oil worse ? I’ve ran one on mine and took it for 3 oil changes oil was black new filter on the intake too , I then changed to a short ram with a duct and found the oil was much better
@@levicc903 I cleaned the filter weekly and oiled it then I switched back to a short ram and the oil and filter went back to normal maybe just living in the dusty areas isn’t good for the cold air that sits near the wheel wells 🤷🏻
@@tylerneff1990 ahh thanks for your thoughts on this! This is what the boys tried to explain to me, but your explanation is easier to understand :) Is your short ram AEM? I have a 2007 sp2.3.. If so, do you remember the deets?
Hey what engine have your mazda ? I have a mazda 3 2008 bk 2.0 manual transmission, i'm searching how to improve it. I want to put a turbo, do you think that can be possible?
Planning on doing my Bumper swap tomorrow. I plan to take of the Intake Res just to see how it will do. I also ordered off amazon a intake 3" tube so I can run that to the front of the bumper instead of the wheel well. This mod dose look a lot nicer and love the Candy Purple look to go with the Car. Sounds awesome too! Hope to have same results with my Cat Back exhaust Also while thinking about it, you ever planning to do a free flow cat with the manifold in the future?
Love your videos, Just wondering is it possible to hook a subwoofer with build in amp into a Mazda axela (3) with the factory stereo because I got a Pioneer subwoofer and wanna install it into my car thanks
Hey colton i have a 2007 mazda 3, love the car had the muffler deleted and it sounds great and recommendations to make it louder without it getting too farty e.g res or 2nd cat delete ?
Hey dude!! My Mazda 3 has currently got duct tape bumpers because of kangaroos. Wondering if you knew of any cheap body kits! I’m doing my RUclips up to become my Mazda 3 project and would love to put you on my channel
@@ColtonRichter I went through all the comments to see if someone asked about this and you say that!😂 05 model, looking for the right intake, what would you suggest?
For those wanting this this intake, it is the same kit as what AEM provides. The Mazdaspeed cold air intake was designed as a replica from the AEM cold air intake. It has the same piping routing, sensor placement, and everything. I believe the pod filters are different (you want the AEM dry flow anyway). The Mazdaspeed version is very difficult to find and is essentially a vanity item at this point. Mazdaspeed also made a copy for the NC Miata as well (again, same as AEM).
Yup!
Mine Mazda 3 2.0L keeps needing oil. My mechanic says it might be the pcv that needs to be replaced... Any plans on changing that?
How is it holding up? How do you keep it in good condition and away from getting soaked from snow or rain?
I drove it through some pretty torrential downpours and it seemed to be fine with the shield. Maintenance cleaning your filter can be done every oil change if you`re picky.
@@ColtonRichter i found a guy selling it for a 100 bucks is it worth getting it? I have a 08 2.3l
Well, the sound overall is a C E R T I F I E D awesome 🔥
Does a 2011 mazda 3 gx sport hatchback with a 2.0l motor need need a flex pipe? My flex and cat is just starting to leak but can't really find a header with cat and a flex so that's why I ask about the flex and if you know any info on what I should put on it my ears are open
Ehhhhhhhhhhh I wont say yes or not
I just noticed you finally cleaned your engine bay lol. I needa clean mine up soon. Im just waiting fir it to get cooler cause its so damn hot and we in September and its still hot like wtf
I love clean engine bays, makes you feel so much better about your car 😂
@ColtonRichter Major facts, when I finally did it I'm just like chef's kiss. So beautiful amd especially since I also have a bunch of new parts under the hood.
I'd really want to put a CAI on my Mazda 3 but i have the Mazda 3 2005 petrol engine, the other type and it's very different and i don't know how, can you please make a video about it ?
You might be referring to the 1.6L engine cause Coltons BK has the 2.0L, there are no CAI for the 1.6, I've looked cause i have a 1.6 too 🥲
where's the video of taking out the stock air intake? I can't get the breather portion out after the box is out
I got a mazda 5, 2.3l engine. Will I be able to fit this cold air intake? But if the rain is an issue then maybe its not such a good idea
2.3 is a little different
What is the part number? I'd like to know what I can look up to find one
@ Colton Richter have you found running a cold air intake on your Mazda 3 makes your oil worse ? I’ve ran one on mine and took it for 3 oil changes oil was black new filter on the intake too , I then changed to a short ram with a duct and found the oil was much better
Not sure man i'll have to see.
did you clean the filter often? My mates at work recommended I'd have to clean my pod filter weekly bc of where the pod filter sits.
@@levicc903 I cleaned the filter weekly and oiled it then I switched back to a short ram and the oil and filter went back to normal maybe just living in the dusty areas isn’t good for the cold air that sits near the wheel wells 🤷🏻
@@ColtonRichter let me know if you find a difference in the oil
@@tylerneff1990 ahh thanks for your thoughts on this! This is what the boys tried to explain to me, but your explanation is easier to understand :)
Is your short ram AEM? I have a 2007 sp2.3.. If so, do you remember the deets?
Hey what engine have your mazda ? I have a mazda 3 2008 bk 2.0 manual transmission, i'm searching how to improve it. I want to put a turbo, do you think that can be possible?
Yes it's possible.
Whats the part number for the intake?
Also, where can you get the OEM Mazda 3 cold air intake (besides the dealership cause I know that parts dude is gonna tax my ass.)
eBay or just Marketplace, they're quite rare
@@ColtonRichter damn that blows that it's rare
Planning on doing my Bumper swap tomorrow. I plan to take of the Intake Res just to see how it will do. I also ordered off amazon a intake 3" tube so I can run that to the front of the bumper instead of the wheel well. This mod dose look a lot nicer and love the Candy Purple look to go with the Car. Sounds awesome too! Hope to have same results with my Cat Back exhaust
Also while thinking about it, you ever planning to do a free flow cat with the manifold in the future?
Might do headers sooner or later!
@@ColtonRichter that’s what I want to see😂👀
hey this is not related to the video but where’d you get your rain guards? i bought a set on ebay but it was trash sizing so i had to return lol
AVS Visors
@@ColtonRichter Ty!
Already thumbs up for color purple
Heck yeah
Can u do a turbo video ??? I’ve been wanting to do it my Mazda but don’t know how
Fund the project
Bro can u plz just put the link I tried looking it up no luck
then there's no available 🤷🏻♂️
how do I but that exact same part?
You can find them used on sell & buy sites.
What exhaust do you have on it?
CorkSport catback
I want the mazdaspeed 3 oem CAI T-T you wouldn't need a tune for that one cause it's oem size right?
There's word saying Gen 1 you don't but Gen 2 do you do
@@ColtonRichter I wonder why, where can I get that btw?
Where’d you get the oem Mazda cold air intake I want one for my 07 mazda
Second hand
I got a 2007 Mazda3 2.3l n I heard these cars leak oil any parts I should get to help it out a bit
The 2.3's tend to burn oil, not a great motor IMO
@@ColtonRichter definitely anything I should you recommend replacing?
@@adr1an2bic68 Depends if it burns or leaks my man
how do you get the oem intake
Find it online
Great video, but whats better cork sport short , or oem mazda intake??
I can explained the difference in the video 🙂
Love your videos, Just wondering is it possible to hook a subwoofer with build in amp into a Mazda axela (3) with the factory stereo because I got a Pioneer subwoofer and wanna install it into my car thanks
Yeah it is check some forums
Hey colton i have a 2007 mazda 3, love the car had the muffler deleted and it sounds great and recommendations to make it louder without it getting too farty e.g res or 2nd cat delete ?
Second cat for sure not the res
2nd Cat Delete
I have a borla axel back, cost 500 with free shipping. 100% worth it
Hey dude!! My Mazda 3 has currently got duct tape bumpers because of kangaroos. Wondering if you knew of any cheap body kits! I’m doing my RUclips up to become my Mazda 3 project and would love to put you on my channel
What intake do you suggest i get for my mazda 3 2008 sedan 2.3l
Cold air intake.
@@ColtonRichter what company
Is your Mazda a 2008?
07
Soooooo wwhheerreee can I get this
a tricky find
@@ColtonRichter I went through all the comments to see if someone asked about this and you say that!😂 05 model, looking for the right intake, what would you suggest?
they all the same, have a look what's to offer