Dude! I straight up saw you have an RC8X, you can easily adjust braking down to resolve that issue. I set mine to about 62 and my MT10 never rolls forward on braking now. You can also trick the ESC brakes when you set the transmitter limits by holding the ESC program button on power up.
Great video as always, I think you took it plenty slow, it's just not a super tough truck, but it was a hard landing!!! Either way it's part of the fun 💯
I watched your content about the Maxx, Rival MT8 and MT10. Currently I own a small 1:18 HBX and an E-Revo VXL 1:16. What would you recommend as next basher for me? Maxx, MT8, MT10? Currently I think an upgraded (Hobbywing ESC + motor, shocks) Rival MT10 can be the most fun in terms of bashing and handling.
Here in Ohio the leaves are falling early from the severe extreme drought we’ve been having . Bushes are starting to die and everyone’s grass is hit hard . Speaking of hitting grass hard 💨😊
I’ve got one of these and I love it but have a little trouble with it skating all over the place and doesn’t track amazingly straight? Is there some adjustments to do? I’ve checked over everything and all seems tight. Any hints ?
Razor RC used the hobbywing program card on the MTA so if it is a ready ESC it should still work on that one too could always try I don't have an empty 10 but I have the MT8 and it works
I put those washers in front of the aluminum upgrade shocks like you did to capture them on the shock tower. I had seen a video when those shocks had come available where someone had issue with them popping off the tower, so I assumed that Team Associated started to provide those washers with the shocks to address that issue. Too bad they didn't provide any instructions indicating that is what they are for. I don't think the truck really needs the upgrade shocks, but they are really nice to have.
The Mt 10 is a lot of fun. RPM arms is a must. The body and posts are garbage along with the wheelie bar. Once they break off just keep bashing without them
Custom RC Upgrades' do a 7075 Motor mount plate for the MT10 it's an awesome upgrade.
Razor RC has a video on how to hack the esc to turn the brakes down. I used the hack to turn my mt10 brakes down to 50 %. Much better
Dude! I straight up saw you have an RC8X, you can easily adjust braking down to resolve that issue. I set mine to about 62 and my MT10 never rolls forward on braking now. You can also trick the ESC brakes when you set the transmitter limits by holding the ESC program button on power up.
Great video as always, I think you took it plenty slow, it's just not a super tough truck, but it was a hard landing!!! Either way it's part of the fun 💯
I watched your content about the Maxx, Rival MT8 and MT10. Currently I own a small 1:18 HBX and an E-Revo VXL 1:16. What would you recommend as next basher for me? Maxx, MT8, MT10? Currently I think an upgraded (Hobbywing ESC + motor, shocks) Rival MT10 can be the most fun in terms of bashing and handling.
Here in Ohio the leaves are falling early from the severe extreme drought we’ve been having . Bushes are starting to die and everyone’s grass is hit hard . Speaking of hitting grass hard 💨😊
My esc burnt up so I put a spektrum 100amp esc in it and it is a world of difference
I’ve got one of these and I love it but have a little trouble with it skating all over the place and doesn’t track amazingly straight? Is there some adjustments to do? I’ve checked over everything and all seems tight. Any hints ?
I see you have the new DJI NEO, mine arrives tomorrow! How do you like it?
Razor RC used the hobbywing program card on the MTA so if it is a ready ESC it should still work on that one too could always try I don't have an empty 10 but I have the MT8 and it works
I meant MT8 and reedy esc
Thanks, HW card doesn't work on the MT10, but you can hack the ESC to set whatever brakes you want which works well.
I put those washers in front of the aluminum upgrade shocks like you did to capture them on the shock tower. I had seen a video when those shocks had come available where someone had issue with them popping off the tower, so I assumed that Team Associated started to provide those washers with the shocks to address that issue. Too bad they didn't provide any instructions indicating that is what they are for. I don't think the truck really needs the upgrade shocks, but they are really nice to have.
I agree. I just liked the look of them.
10bl120 3700kv hobbywing combo next lol
I have that in my rlaario Omni terminator 24 pinion lol
The stock braking setting must be 250 percent.
The Mt 10 is a lot of fun. RPM arms is a must. The body and posts are garbage along with the wheelie bar. Once they break off just keep bashing without them
true but I rather those things brake then it to transfer to the bulk head or chassis.