Cura Questions - See and Edit G Code?
HTML-код
- Опубликовано: 3 авг 2024
- want to see and edit the gcode files made by cura slicer? i use notepad++, and you ca get it here: notepad-plus-plus.org/downloads/
Like and Subscribe!
Find 3dprinters and other cool Tech at:
www.amazon.com/shop/technivor...
SUPPORT TECHNIVOROUS 3D Printing:
TeeSpring Technivorous Merch!
teespring.com/stores/technivo...
become a channel member for youtube perks!
/ @technivorous
Paypal: Vanethrane@gmail.com
Check out my Patreon page: / technivorous
or you can buy me a coffee: www.buymeacoffee.com/technivo...
Send me a gwei! (ether address, all donations accepted!)
0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c
send me a satoshi! (bitcoin address, all donations accepted!)
31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Current Channel Goal: 25,000 Subs! - Наука
how do i search by layor height in mm like if i want to print from layor 10mm how do i figure out where that is in gcode
How do i paste that code to get it to print? When i save the file the printer does not recognize it bc its text and not gcode but i cant figure out how to convert file to gcode
Great video!!! QQ: Since cure 11.0 I can't set my retractions correctly. I tried múltiple times changing the retraction speed/distance but nothing seems to work. In cura 10.0 I had perfect retractions with 6.0 distance and 25 mm/s speed. Same issue Is happening on cura 12.0 beta. Any idea what other parameter to change for this new cura versions? Thanks a Lot!!!
Hey... I finally got my 1st print layer sorted.. and now printing my first test print model... I did notice when I was in my Creality Slicer that I could modify the Gcode right in the slicer and it saves there... I am using Creality Slicer v4.8.2 if that helps... once I get things really dialed in I will move over to Cura Slicer which seems to be the main silcer that everyone uses for the Ender 3v2 these days.. so I best get with the other kids in the playground and join them... but then again being different does have it's benefits but not always.... haha....
How can you resume and edit a cura file for ender 3v2 noticed that gcode dont have zed axis in it just x,y,and extruder....plz help print failed at 11h
When I edit my start G code on my Ender 3 in Cura, I can change the movements, but it doesn´t let me extrude after the 2 purge lines. When the actual model starts, it extrudes again.. Why?
I just want the auto-level deleted. I only need auto-level once, until I make changes.
I installed a cr touch bit the printer deos it normal startup and when I start printing it deos not print and it deos what it would When It finishes
I want to pause the printer mid- print. How do I do it?
Hello I am a beginner printer,
When I was using my stock ender 3 with minor upgrades (cr touch, glass bed, ptfe bowden) I was getting great prints.
I recently upgraded my drive to sprite direct extruder and the prints are coming out great the only weird thing is after I updated the firmware to the sprite extruder firmware my cr touch probing spots are way off.
Like I said the prints are still coming out good but I am kinda OCD about things like this. How can I use what your showing us to change the problem locations for the cr touch level bed feature
Probe*
It sounds like I can’t simply rescale and add I fill on a perfect print. I have to cross reference everything back and forth? Not gonna lie, that’s dumb, lol. Cura can make a gcode but, can’t properly read it so you can make changes 😂🤷🏻
Put me out of my misery, whats your video called where you show how to find start and end gcodes for your machine? Please..