GRIDLINES (Column Grids) in AutoCAD Architecture 2023
HTML-код
- Опубликовано: 6 июл 2024
- 🎓3D Modeling With AutoCAD Architecture course:
learn.tdvisionuniversity.com/...
🎓Views, Annotations and Sheets with AutoCAD Architecture course: learn.tdvisionuniversity.com/...
---------------------------------------------------------------------------------
This is episode 03 of the One Bedroom House series, showing you how to draw a small house "From Start To Finish". My hope is that you will learn the fundamentals so that you can apply them to your own projects.
In this video, I will be showing how to layout column grids for your projects. It's pretty simple. I hope that you learn something from today's video.
Thank you all for watching and sharing.
Give it a like, and subscribe! Oh...drop a comment too!
TIMELINE CONTENT
0:00 - Intro
2:05 - AutoCAD Tutorial
18:10 - The End
---------------------------------------------------------------------------------
**RESOURSES**
🔶 Join this channel to get access to perks:
/ @tdvision_u
🔶 Or join my Patreon Page:
/ tdvision
🏅 Best AutoCAD Architecture Playlist on the internet
• AutoCAD Architecture 2...
⭐Download PDFs: One Bedroom House
mailchi.mp/956dd1eb9ccf/one-b...
---------------------------------------------------------------------------------
#OneBedroomHouse #AutoCAD #Architecture
---------------------------------------------------------------------------------
GEARS I USE:
kit.co/TDVisionU
FOLLOW ME ON SOCIAL MEDIA:
linktr.ee/tdvisionu
CREDITS:
Music: RUclips Audio Library (free audio)
Check out my 3D Modeling With AutoCAD Architecture course:
learn.tdvisionuniversity.com/courses/3d-autocad-architecture-beginners-intermediate-course
Views, Annotations and Sheets with AutoCAD Architecture course: learn.tdvisionuniversity.com/courses/views-annotations-with-autocad-architecture
Thankyou! As a complete beginner, your tutorial was clear and gave me the information that I needed. I look forward to learning more with you.
Hello and thank you for this series of videos, they’re perfect for helping to switch from Advance Steel/AutoCAD to A-CAD Architectural. I wanted to offer a time saver for extending parallel lines as you did with the grid. Rather than grip editing them you can offset the four perimeter lines and use the extend command, then delete the newly offset lines. Saves keystrokes and the potential for misalignment.
Can't believe this content is free. Excellent work!
Thanks for your teachings. Have Been following from episode 1.Thanks soo much.
Hello and thank you very much for helping someone like me to get better understand of AutoCAD, thank you again
This is awesome, really helpful
Very informative and understanding👍👍👍....just keep on making videos sir🔥🇯🇲
Great lesson ! Thanks a lot !
TD vision your work is great. Just Keep going. I learnt so many things.
Love this brother, appreciate the tips.
i have learned a lot from TD Vision, Straightforward tutorials, very nice. Stay Safe Man. God Bless You.
Thanks man.
Great Work !! Thanks !!
Awesome
Appreciate!
This is what Ive been looking for the entire semester!! Thank you very much! Definitely subscribing
Great practice to do this first to ensure that your walls are where you intend them to be when you draw them later.
Great video bro. really helpful
Thank you, you teach me more than my university does. I hope the best for you and your future as you bless us with these tutorials!!!
Again, very well done. I like to use offset when I have lines to extend from a common point; offset, extend then trim. Im not the best keyboardist so this will ensure my accuracy.
Nice... I am the opposite. I'm a keyboard shortcut guy.
same here!
I LovE the music in the intro 👍
you are realy perfect in autocad archtitecture
Excellent video
I have enjoyed the video on Autocad Architecture
great video thanks
thanks bro,
Thanks Sir
A fast way to extend the gridlines is to extend one to your desired point. Then create a ray (using the ray tool) spanning across the rest of the lines, starting at your newly extended line (ensure the ray is straight). Then you use the extend tool to highlight the ray, and select all of the gridlines you want extend. This should extend all the grid lines to the same desired length. Do the same for all sides that need extension.
You can also just make a box offset around your grid perimeter, and use the extend tool to extend all your lines up to the perimeter of the box. Then erase the box.
Hi, thank you for this video. I have a question. I can't find my custom grid on the design pallette,what do I do? Thank you
Hello thank you for this series it is really helping me as a new student to AutoCAD. I have come up on one challenge so for and I hope you will be able to assist. Firstly, I am using AutoCAD 2018. Now when you were doing the angle from the XY 0 grid and I was trying to follow my version would allow me to set the 45 degree handle and how can I set the length of the line on the version???
My brother. I have learnt so much from your videos and I keep on learning. I would like to also learn how to draw foundations and reinforcement steel in Autocad Architecture. Thank you so much
Thanks. Check out my playlist in the description.
@@TDVision_U thanks I will. Keep up the good work. Blessings
Very good video!
Thanks you bro.
AMAZIN JOB BRO!!.GREETINGS FROM CUBA!
Thank you! Cheers to Cuba!
respect my G
use dimlayer for dimensioning in your template drawing so dimensions will allways be on the correct layer whatever you do
Good
nice
This was super helpful! Wondering how to add the Design Tool Palette for the grid lines? It seems mine is missing
Ah, I just read a comment and you said Autocad Architecture. It looks like I have the regular Autocad2024? Does that mean it won't be possible to add?
I have a problem,in my autocad 2021 i can't find my project browser and in my tool pallete there is no design,what will I do?
Awesome learning channel...I have a question though. I am trying to set up my drawing with the columns and grid, but if it's a new drawing( house doesn't exist yet) how do you know what the column and grid spacing will be? It looks like you need to draw the floorplan first then add the columns? Great job!!!!
Thank you!
You're correct. You'd have to have an idea of the building layout in order to develop gridlines. As you develop your drawing, the design might change, and so you can update your gridlines from time to time to match with your current design.
WOOOOW, CHARLE U BE TOOOOOOOOO MUCH
This is really helpful, thank you✨ ... for the global cut plane I see you have 3' 6" I am using metric how do I set mine the same? Also when I click grid column my circles are really big how do I get them the same size as yours.. I am using 1:50 scale
If you're using the 1:50 scale, then your circles should be at a good. Something else might be wrong here. 3' 6" is equivalent to ~1050mm.
King❤
Hello! How do you add gridlines on elevations?
Using your grid box autocad's (Architecture 2023) column grid actually created doubles of the bubbles. So it only worked properly when I removed all of the 12" extensions.
for extending lines for the column grids:
1. Select parallel lines (either all of the horizontal or vertical lines)
2. Hold the shift key
3. Select the endpoints of parallel lines (while still holding the shift key, the endpoint you selected will change color from blue to red)
4. Select one of the endpoints, then (you can release the shift key after selecting all of the endpoints)
5. Extend it to your preferred length.
After that, all of the selected lines will extend according to that one changed endpoint, makes the work easier :))
The Fresh Prince of AutoCAD
Lol, that's actually a cool name if I were to rename the channel.
Thanks for this video it's really helpful of you but I'm trying to xref overlay my grid line to the ground floor sheet n it isn't working why?
Move your gridlines from Elements to Construct. Elements won't print on sheets.
After discovering this channel i just want to be ur friend. big ups bro. u fucking good in AutoCAD. damn it. i have emailed you
yes bredda ,,, thing shatt, giv thnks
Thanks man! Appreciate it.
THANKS, DUDE FOR YOUR GOOD VIDEO LECTURE
Are the dimensions for the grid line arbitrary or do they correspond to the dimensions of the house? Thanks
They correspond to the dimensions of the building, or the colomns throughout the building.
Hi thank you so much for all your help ! its so useful ... but ! My bubbles don't want to appear .. I did everything like u but they r hiding somewhere. Some help ? Please please :) A big thank from France
Did you check the layers? Make sure none is turned off? Also did you set your scale to 1/4" or 1/8"?
Must be a Utech man. Mi general u know u ting...up top dada. Gwaan dweet. Mad....
time stamp 9:00.......hint on extending the grid lines...... ether use "Stretch" or when you select the lines. press and hold "Shift key" and click the blue boxes (Pick Points) to make them turn red. (hot Points). once you have all the "Hot Points" you want. then select one of the "hot Points" and drag as you showed before... 😉
One question tho, what if someone columns do not pass the grid lines.. is it legible to be a column diagram
Well done, pls kindly let me know how to access the design tool in autocad 2020. Thanks.
So the design tool you see in my videos is only available in AutoCAD Architecture, which is different from AutoCAD.
@@TDVision_UMany thanks
Hey, I keep watching this part over and over again trying to understand why you didn't put the gridline through all the Horizontal walls? any explanation, please?
also, I wanna know if gridlines need to be put on all walls in a floor plan? thank you
Good question. The answer is no. I am not sure what the rules as to where to put grids, but I usually put grids where there's a series of columns to be laid out, especially in places where the building will need to be supported by these columns. This one bedroom house is not the best example. The image I used in the illustration is a better one.
@@TDVision_U thank you so much for your reply. Much appreciated!
Hello I have a good question here, something that is bothering me. When I create a view of a floor plan everything is visible including the column grid lines, the moment i send the view of the plan to a sheet the column grid line and bubbles disappear. Can you orient me on that, I have tried many options and nothing to be fruitfull. Would really appreciate if you have an answer to that.
I think this is happening because you made the grids as an element rather than a construct. Try this: Xref the grid lines element into your "floor plan construct" and save. That should put the grids on your view as well as your sheet. You may have to redo dimensions previous associated with grid lines. Let me know how it goes.
HI.. im not seeing the grid lines in my ground floor when I inport it as an Xref.. any idea why I'm unable to see it?
I'm not sure. There could be many reasons. Layers, scale, not linked propertly?
I cannot find the Design tool palette in my autoCAD 23. I can find other palettes but they also seem to look different as compared to what is shown. please help
Make sure that you're using AutoCAD Architecture and not the regular AutoCAD.
well i have 2019 version. after wathed this I instantly download 2020 version. but still I couldn't find tools that you used. stylesbrowser, projectmanager ext....... all the tricks that you are used in here. do I have to download all that stuffs?
You will need AutoCAD Architecture,
when i go to tool palettes there is no design tool how to find that wall and columns. can you tell me where to fined it
Are you using AutoCAD Architecture?
@@TDVision_U Yes, I have the same issues with him as my tool palettes does not have design tool. I'm using Student version. Is there anything wrong ? Hope to hear your answer soon bro.
hi bro, will you be able to show the set in autocad 2022
Hopefully soon.
how to I can change the gridline color by layer?
Hello friend, I created my gridlines
Opened my ground floor plan and tried the Xref overlay to import the grid there. However the gridlines are not showing. I redo the process and I’m told it’s already referenced on the plan, yet not visible. How do I make it visible? Any help please?
It seems like you have the Grids already xref in. What you need to do is open the xref palette (XREF), and reload from there.
Thank you so much sir to make this video but I am biginner of autocadd I heartly request you to please 🙏 make the difference type of acknowledge in AutoCAD 2D for biginner
how do i get it done on four bebroom plan
my dimensions are slightly off--for example, instead of 12'6", i have 12'6 3/16". I know i typed in the exact dimensions when we were going through the tutorial. How do I fix this?
You may have snap mode turned on. Press the F9 key to turn it off. Also go the UNITS command and ensure your precision is set to 0' - 0 256".
Hi Guy, This is awesome video training. But my tools are not like your. How can I get Column Grid tool into Design tab.
OK I got It.
How bro, I have the same problem, my tool palettes did not have design tool. I really appriciate if you could help
I don't know how to draw grid am just learning 🤗🤗🤗
Awesome 😎
Hey Mr. TD am parvin i have a challenge with scaling, units my units when drawing are in thousands.i use millimeters .please help out
You should check out my video on Units. I don't know if it will help but here's the link ruclips.net/video/HSqZtIb_jSw/видео.html
I have a problem with columns grid :(, when I apply it to the current linework, when i finished applying it, the circle are just too big, the radius is 5.50 meters o 5,500mm,I need help :(
Change your scale on the status bar to 1:50 or 1/4", then redo the application. Let me know if that worked.
@@TDVision_U it worked, but in a separate drawing, AutoCAD doesn't let me change the scale in the project that I've created, I don't know why, I guess I'll try it creating a new project again, but thanks, I'm so excited to watch the following videos, keep it up, thanks mate. Greetings from Paraguay.
Ahhh! Well I'm happy it worked. Big-up to you in Paraguay! Thanks for checking out my vids.
Easier way to draw gridlines instead of typing in all those numbers to extend the lines...
At 8:30.... Use offset tool and offset the four outer edges by 12". Then use the "Extend" tool and click all the lines to extend them out to the newly 12" offset edges. Then erase those newly offset edges
Can u explain to me. how can I set grid lines autocad 2018 pls
Make sure you're using AutoCAD Architecture version.
I really appreciate you bro but please I’m struggling with cutting and projecting complete building section please help me out..
If I'm understanding your problem, continue to watch this series. Complete section views can be automatically generated in AutoCAD Architecture.
Upon checking this 2018 version do not have US Imperial templates. So I have to create one.
Oh I see. Are you using the student version? Also, did you check to see if the imperial templates were installed on your machine? Like I did in episode 02.
@@TDVision_U yeah I check. It does have the option for the US imperial but not the template. Yes this is the student version. Got it from a teacher who was recently tutoring me.
Ok. The student version is limited. I am not sure of what limitations there are.
Oh. Well, will use what is available to me.
I enjoy your teach. It is clear and understandable.
Awesome! I am happy to know that man. Appreciate it.
xref overlay is not working for me . the grid lines are not appearing in ground floor construct
I hope you got that resolved
I'm having a little difficulty opening grid lines in architectural desktop 2010
I'm not sure why you'd have such a problem. You might need to reinstall AutoCAD
Please i want tono defined level of ground for superpose level of m'y bâtiment
You want to know how to do superimposed in AutoCAD? I'm trying to understand your comment.
Hi, when I click Xref Overlay, nothing happens. why ?
I'm not sure why. It should work.
@@TDVision_U first time when I follow yours tutorial was everything fine, but next time I try to do different house, but still follow yours tuttorial and nothing happen :(
It would have been easier to have offset the boundary lines outward by 12' then extended the original lines to the new offsets finally erasing the new offset lines.
That is true.
May you make you add gridlines?
I'm not following. Can you rephrase?
I have trouble adding gridlines please tell me how to add gridlines or change gridlines
I realized that you did the GRIDLINES first before you did the walls. This means you would have to know before hand where the columns are or will be...follow me....For simply plans thats fine but for larger plans, wouldn't it be easier to draw the walls then generate the grid lines from that. OR is it best practice to do grids then walls. I am a novice, just want to know.
You're correct, sometimes you will need to do the walls first.
I cant find DESIGN TOOL
Are you using AutoCAD Architecture?
@@TDVision_U Yes i am Using AutoCAD Architecture
@@TDVision_U I use AutoCAD Imperial
My God theres volume
Je ne parle pas très bien anglais j'aimerai connaître définir les niveaux afin de pouvoir assembler les étage je te prie pour mieux dessiner sur autocar grand frère
Je ne parle pas français non plus. Dieu merci pour le traducteur google. Découvrez ma playlist ici : ruclips.net/p/PLyLLcCaRflgCTuP493CZuUOFdMdh-a_jc
You make me sleep, how many times you 're gonna say "all right" "all right: ....."all right". you use to be a little better, but you are going down , I guess I'm about to unsusbcribe from this channel.
Lol. I feel it for you bruh.
Good
Hi, thank you for this video. I have a question. I can't find my custom grid on the design pallette,what do I do? Thank you
Are you using AutoCAD Architecture? If you are, try the commands COLUMNGRIDADD, or CUSTOMCOLUMNGRIDADD.
@@TDVision_U thank you very much. It worked!