Teufel IP300 Blu-Ray Laufwerk defekt - Reparaturversuch
HTML-код
- Опубликовано: 27 окт 2024
- Hier versuche ich einen Teufel IP 300 BR zu reparieren wo das Blu-Ray Laufwerk nicht geht.
Symptome:
Schublade öffnet sich nicht
Kein HDMI Ausgang (Kein Bild)
Bedientasten an der Front ohne Funktion
Interessantes Video! 👍
Sehr interessantes Video.
Hallöchen!
Ich besitze ebenfalls einen solchen BR-Receiver IP 300 BR.
Vielleicht können Sie mir behilflich sein..? 🤔
Zunächst sei erwähnt, daß ich natürlich NICHT über solche Gerätschaften wie Sie in Ihrem Video verfüge.. 😔
Ergo auch nur teilweise begriffen habe, was Sie mit diesen GENAU angestellt haben.
Also die Problematik an meinem Receiver ist ebenfalls das BR-Laufwerk.
Sobald ich den Receiver anmache (um Radio zu hören), versucht er das BR-Fach zu öffnen, das kann man ganz klar hören.
Sprich Strom kommt am BR-Spieler an, ABER die Lade will partout nicht herauskommen, sie hängt irgendwie fest.. 🙄🤔
Zur Verfügung steht mir ein Duspol "Pan Volttester 400 FI", um eventuell einen Fehler auf der Platine zu finden, sofern das Teil dazu geeignet ist.. 🤔?
Ich habe den Receier bereits schon Mal aufgeschraubt, konnte jedoch von oben nicht einsehen, wo das Problem mechanischer Natur, beim BR-Laufwerk liegen könnte. LEIDER!
Vielleicht könnte man ja auch einfach dieses fehlerhafte Laufwerk durch ein Anderes austauschen..?
Zu Ihrer Info:
Ich habe bereits diverse Rechner (PCs) auseinander/umgebaut, verschiedene Komponenten getauscht.
Über eine Rückmeldung wäre ich sehr dankbar.
Liebe Grüße aus Oberhausen (Ruhrgebiet)
Hi from Czech republic. In first, thanks for your videos, especialy about diagnostic and repairs control units and eeprom programming, that is very interesting and useful for me. I see an ECU tester 9000+ on your table, are you happy with it? Can you make some english video about this tester?
Thank you, David.
Hey David and thank you for watching my stuff! :) The 9000+ was a wrong investition! 1: i have to disable the immo on each ECU that i want to test 2: it takes very long to set up, because i have to create the correct crankshaft-pattern for each ECU on a very crappy windows software first. Some older ECU's are pre-made, but for the newer ECU's it's a nightmare. I recommend to diagnose the ECU in the car with a scope and repair it at home later. Thank you and stay tuned :) Matthias
PLL init = crystal defective? DEAD seems to be followed by a signed 16-bit integer? in the end it was just varying +- 200.
I think the PLL is used to multiply the internal CPU clock with the external crystal. If the external crystal whould not work, the CPU will not do anything i suspect. In fact, the external crystal is working correctly. I think i have one of 2 possibilities here: 1: the internal PLL from the Broadcom is dead or there's a problem with the high-speed clock that goes to the RAM's. I have also noticed a very low resistance to GND at the 1.2V supply and the Boradcom gets very hot. I have ordered a new Broadcom Chip and will try if this helps. Thanks for your input! Nice how you think about all my stuff! :) BR Matthias
Where is the English language? 🤔I cannot understand German
Sorry, this stereo was only made in germany. So i think only german speaking people are interested! Next video will be english again! Thanks for your input! BR Matthias
@@kostelectronics Ja sie sind interessiert.