Sharpening Hedge Trimmer Blades with the Stihl USG Vs Aftermarket blades.
HTML-код
- Опубликовано: 28 июн 2024
- A demonstration of the Stihl USG grinder with the hedger attachment Vs the good ol' angle grinder.
An example of how to remove, install, and disassemble the cutter bar or blades. Demonstration of use of an aftermarket hedge trimer blades and sharpening the OEM blades.
For entertainment poupous only.
0:00 intro
:01 disassembly
2:38 Install aftermarket blades
4:17 Blade inspection
6:05 Dull Blade Example
7:04 Prep and Setup
8:27 Adjustments and Setup
16:02 Sharpening
20:36 Comparison and results
23:05 Aftermarket blade demo
24:23 Stihl blade demo
25:26 Angle grinder method
27:35 Comparing to chain
28:42 Review 
Развлечения
That was a nice demo on the Stihl USG 👍. I want one now 😀
Does a great job, hard to justify the cost. I thought this video would be more popular!
Just a note, recently had "bar freeze/lock thinking a gear problem,,, well the fiber locking nut locking part failed or wore out over the many years of use and would tighten down and lock/freeze the blades,,, it was a combo nut and bolt issue,, bolt threads major ware ,, in this case the duo closest to the gears, new nut and bolt, and back in action..
13:02 take the bolt out completely and use the arm as the stop for more adjustment
That was a really good video.
I hope you make a chain grinding video at some point, I have the same grinder and I think I have it dialed in pretty good but I like to see what other people are doing. I have a short video on how I set mine. This summer I will be testing some custom grinds for myself because I like my own chains real aggressive.
Will do, give me a week or two.
good morning!!! Where can I purchase that product? very interesting . thank you
New subscriber here. Good video I just did a video on switching the chain on my 661
- 8 degrees is the proper setting.