2002 Socket 478 CPU installation video
HTML-код
- Опубликовано: 16 сен 2024
- Digging through my old stuff, I found this old video from a "how-to build your own PC" guide I was working on at the time.
For people that need to be "talked through" installing a CPU and HSF.
That heat sink compound looked used. If your going to reapply the heatsink, you need to reapply NEW heatsink compound and remove the old paste. If it does come with paste on a new heat sink it must not be exposed to the air for very long.
Back when that video was shot, it wasn't an "old" AGP board. Back then, AGP was it. :)
@eilif9 It's a table, not a floor and yes it worked. Why wouldn't it? The table's laminiated and the motherboard was spinning on the tips of the plastic clips that the northbridge heatsink and PCI slots were attached with. Don't be a know-it-all.
good video! only thing he forgot is the thermal paste!!!
No. I used the TIM that came with the heatsink.
@themanhunt1234 Nit pick much? ;-)
It's actually not even called a "bracket", but rather a "retention mechanism" and the part that clicks into it is a "clip frame", as per Intel. There is no "bracket", per se.
And Molex is a brand of connector. It can be any number of pins, any shape of connector if you want to get technical. The 4-pin connector everyone calls a "Molex" isn't really a Molex either unless its made by Molex, It's actually a "peripheral power connector".
Lol.
Read further down. Heatsink has a thermal pad on it.
Old hardware feels better and somehow is nicer to have..
i had a celeron d socket 478 once it had like 10 missing pins through damage and it stil worked :O
Thank you for having created this video and for posting it to youtube. I really appreciate your doing this!
what if your processor socket doesnt have the lever mine is just on is it removable there my mother board doesnt have that little box for heatsink and heatsink doesnt have a fan
It's in the title: Socket 478
When 240p still looks like 144p
0I have a 478 size socket...and want to upgarde my cpu without having to get a new cpu......any suggestionjs
can you help me please?
my retention module originally has four screws that attach to the mobo..., but it had broken. i bought a new one, but it has the plastic rivets. can i use the new one or do i need to get the one with the 4 screws.
Which P4 board there are 3 types, Socket 423, Socket 478 and Socket 775.
Good video
I have the heatsink with the thermal paste that hardens on the CPU how do i remove the CPU then? Do I have to run the computer shut it off and take it off when its still hot?
can someone please help =/ i think my processor was glued onto the heatsink with thermal gel =/
can someone tell me if all socket 478 processors work with the same heat sink they come with, regardless of the Ghz? because i'm planning on upgrading my CPU soon.
What CPY you recomend me, i have a acer aspire 1315 with this socke, and im bored because my CPU its a celeron 1.7 1mb chache l2, bad, i need 2.4 i can say, but what CPU i can use and its not take me problems?
Mind show a video of uninstalling the HeatSink ??? i got some probelm in uninstalling it
Couldn't you run the computer for a bit, shut the PC off, and then take it off while it's still hot?
Probably not the greatest for the processor, but still....
wait one more question can you get a better cpu with the same socket or do i have to buy a new everything
Did that motherboard work, after u finished spinning and rubbing it into your floor?
Those were the days. When the fucking vid card actually fit in the case. lmao.
does anyone know how to install the cpu motherboard bracket with push pins? im talking about this part - i.ebayimg.com/00/s/MTIwMFgxNjAw/z/waEAAMXQHU1Rrj6u/$T2eC16dHJHQFFhb,3g!zBRrj6u!z4w~~60_57.JPG
the push pins are not like the intel lga 1155 / 775 coolers where you use a flat head to turn them clockwise or counter clockwise, so would you just push them down directly to snap into place? im also looking for the retention clips, but im not sure if i found the right one to work with the foxconn push pin bracket. the cooler im gonna use is the rosewill rcx-z200.
thermal grease?
wow my computer older then my grandma's computer 2002 dam i need a new cpu
what motherboard was that?
@jonnyGURU Nah sure but i mean it isnt exactly smart to spin it like that anyway... peace
Is that an old AGP motherboard? I recently installed a new vid card and ram and everything's running smooth. But I gotta upgrade from this P4 2.00ghz. I'm currently searching for Dell Dimension 8200 upgrade vids. This was a great help thanks.
4got cpu thermal paste
nice mobo.
Try eBay! :)
You should find them rather cheap
thx bro for the lesson....
lol like hears on my arm
lol like this i think you bent one
and.......PENTIUM 4 PROCESSOR! hahahahaha u talk like commertial xD!
Can i put the pentium 4 extreme in a 478 socket? It has a pentium 4 2.26 ghz cpu rn... 1c/1th :(
How do you remove the cooler by the way?
thermal grease?