Automatic Card Shuffler not working, not running, runs slow or intermittent
HTML-код
- Опубликовано: 1 авг 2019
- In this video I will demonstrate an Automatic Card Shuffler and how to repair the most common failure.
To view ALL our videos:
• How to replace A Bathr...
Please give this video a THUMBS UP and SHARE it with your friends.
Please LIKE and SUBSCRIBE
Support from viewers like you is what keeps us going.
Thank you for your support.
Please visit our website at:
diywithwayne.com
Visit us on Facebook:
/ diywithwayne
The focus of our RUclips Channel is to help you save money by doing things yourself!
Please visit our new RUclips Travel Channel, "Bucket List Time with Ann and Wayne"
/ @bucketlisttime
Thank you for visiting and have a great day!
Wayne
Thanks. Very practical. My wife s got a small one not working and a larger one like the three you have shown. If the big one stops, I have the glue and toothpicks but I ll prbly try first to find a piece of thin metal. Appreciate the explanation.
Some people complain about the noise these machines make. That's caused by the speed the machine is running at. The noise level can be reduced by simply pressing the button about halfway down and running it at a lower speed; it will still shuffle the cards.
THANK YOU, Wayne! I bought one of these today at a yard sale and it didn’t work - found your video and now it works perfectly. Thank you for sharing 🙏🏼
Great demo Wayne!! I just bought three shufflers. If they cause me problems, thanks to you, I can fix it!
Thank you Wayne for making this video! Our card shuffler stopped working and my little kids were so bummed. I’m so glad I decided to google how to fix it before purchasing another! Such a quick fix :) I used part of a Bobby pin. Works great! Thank you again, you saved the day!
Fixed mine exactly like this video and running smoothly with no problems so far, thanks
I couldn't see any reason for having those protruding tooth wheels at the back (on both sides of the tray); they serve no function, so I opened up the machine and took them both out (and I'm glad that I did). The machine now runs much smoother, cards don't get jammed, it's far less noisy, and the cards don't jump around and fly off the tray (this is all because of those stupid wheels at the back). The initial reason for taking those wheels out is because they may damage the cards in time with those teeth. And while I had the machine opened, I fixed the lever that starts the device; the contact plates were not touching when the lever was pressed down, so I put a piece of plastic underneath the bottom contact plate to raise it up a little.
you are a lifesaver. i bought 3. one for myself and two for christmas gifts. the one i started after one day, melted half way. i just reinforced all three with a cut paper clip and hopefully they last a little longer
Thanks for the video...I had the problem with the left side not pulling in the cards because the housing was separating..just hot glued it and working good as new!!
The best solution to the factory switch is to solder a wire across the switch so that the wire is hot all the time then add a rocker switch to the body of the shuffler. Works great and keeps both hands available to assist feeding cards.
These shufflers are junk... bought one and right out of the box it had both problems you showed. I fixed the switch and made a adjustment to the feed but it's still not very good at feeding and the same rate. Found your video but you don't cover have to fix the feeding issue.. Any solution to the feeding problem?
Muy buen video, compre una nueva y no funcionaba, la desarme y acomode el contacto, quedó perfecta, acabo de repararla.
What was the fix for the cards not shuffling ? Mentioned at
Hi Wayne. I have the other issue that you described, it is feeding fast from the right, but very slowly from the left. ...any ideas on how I could go about fixing that? Thanks for the video
I have the exact same one, what about cards shuffling onto the table in reverse instead of shuffling into the case????
Should you ever lubricate the gears? If so, with what?
Mines brand new but doesn't work, would that still be the same problem. It's wirring but doesn't move the cards
Hi Dwayne, have you worked on the ARRCO battery operated card shuffler? I got one on ebay but it does not work well.
What about the one that only pulls from one side?
If both sides don't work same solution