How to Build A Ring The Bell Fairground High Striker - Episode 7 of 7 - Artwork & Build Up.
HTML-код
- Опубликовано: 6 сен 2024
- Here @amusementsrevisited we're going to show you how you can build your own Funfair 7ft High Striker, perfect for village fetes and galas, charity events and school summer fairs! Today we'll be showing you how to get started on your FAIRGROUND ART & THE BUILD UP - Yes the Striker is finished and ready to use! Below you'll find the Shopping List, as promised. IT'S THE LAST VIDEO, IF YOU'VE LOVED THIS SERIES, DO SHARE & SUBSCRIBE!
EVERYTHING YOU'LL NEED TO BUY OR HAVE TO MAKE THIS PROJECT!
Most of these products are available in general builders stores and you shouldn't have much problem obtaining them. Where we've bought online we'll add the affiliate link for you below.
* 1 of 8ft x 4ft 12 mm Hardwood Plywood.
* 1 of 4ft x 4ft 18mm Hardwood Plywood (ignore video size).
* 2 of 8ft x ½" Half Round Edging Strips.
* 2 x Heavy Duty Tent Pegs
* 1 of 4ft 20mm x 20mm Soft Wood.
* 1 of 20" x 1" (25mm) Heavy Duty Box Iron.
* 1 of 30" x 1" (25mm) x 6mm Flat Iron Bar.
* 1 of 1 metre of 50mm x 50mm x 3mm Angle Iron.
* 1 of 12" of 25mm x 25mm of Angle Iron.
* 1 of 2 metres x 25mm x 3mm Flat Iron Bar.
* 1 of 6" Fire Bell.
* 1 of 40mm Hard Wood Rolling Pin.
* 1 of 45mm Hole Cutter (Drill Attachment).
* 1 of ¾" x No. 6 Wood Screws (Box Of).
* 12 of 1¼" x No. 8 Wood Screws.
* 1 of 2" x No. 8 Wood Screws (Box Of).
* 1 of Gorilla Wood Glue - amzn.to/3kNuzMm
* 1 of Big Boy Body Filler - amzn.to/3WQjZ4D
* 2 of 60mm x 8mm Coach Bolts.
* 4 of 8mm Wing Nuts.
* 6 of 80mm x 8mm Coach Bolts.
* 12 of 8mm Locking Nuts.
* 1 of 60mm x 10mm High Tensile Bolt with Locking Nut.
* 2 of 50mm x 6mm Coach Bolts with Locking Nuts.
* 20 of 6mm Nuts.
* Pair of Heavy Duty 11" length x 4" depth Tee Hinges
* Drill Bits Required are 3mm, 6mm, 7mm, 8mm, 8.5mm and 10mm.
* 1 of Clean Cut Jigsaw Blade
* 1 of Jigsaw Scroll Blade
* 1 of Plastikote Metallics Gold Spray - amzn.to/40hdlaD
* 1 of Helix French Curve Set - amzn.to/3HFLmZE
* 1 Litre of Oil Based Wood Primer
* 1 Litre of Oil Based Undercoat
* 1 Litre of Oil Based Top Coat (One Shot/Wrights of Lymm/Craftmaster)
* 1 (at least) of Thor Black Rubber Mallet Weight 800gram.
* Useful tools with be a Set Square, Tape Measure, Drill or Electric Screwdriver, Angle Grinder or Hacksaw, G-Clamps, Set of Spanners & Socket Set for tightening bolts. Good Quality Sign Writing Enamels, Wood Primer, Exterior Gloss Varnish and Paint Brushes.
DO NOT USE WATER BASED PAINT OR ACRYLIC PAINTS, THEY WILL NOT LAST OUTSIDE.
Excellent build!! So awesome
Thank you! Are you having a go yourself?
You know you are getting old when you spend your friday night watching this whole series... I enjoyed your videos, nice tips and tricks! Maybe I will be building one in the future. Don't really need one for anything but seemed like fun build.
haha! I'm with you there regarding spamming series! Good luck if you go for a build!
Loved the series!
Thank you! Are you gonna have a go at your own striker now then? 👍🏻
Tasty artwork
Thank you, hoping to show it's fairly easy to do!
Love the build from the USA.
Hello from Wales UK! Delighted you enjoyed the build, thank you :)
how do you make it harder to hit the bell love the episodes
Delighted you're enjoying the series! Thank you. To make the game harder, simply make the pin (the bit you hit) shorter; works a treat!
Really good series enjoyed it. I am finishing off a fortune teller build at the moment and then... You have inspired me to build a striker. On a side note have you ever made a fairground curved mirror ?
Thank you so much for your positive comments; much appreciated! The fortune teller build sounds great, that’s on my to do list. Lots of luck with yours. Made a couple some years back from acrylic glass, absolute pain to do though. 🤣
Fabulous Job well done, sent you an email :)
Replied back, sadly Chris doesn't make them to sell anymore! Delighted you enjoyed the video!
Hi ,
Loved the videos, so glad you're passing the knowledge on. A quick question, if you used the same build for the box and mechanism, how tallcould the backboard be made.
Would you need to change all of the dimensions. Thanks for the videos again.
Great you love the videos! Thank you! Tbh I think to change the size of the backboard you’d need to scale the box and mech up, as the arm would need a bigger swing to lift the mouse higher. Hope that helps!
@amusementsrevisited Thanks for your message, l will build a striker so thank you for your video and channel, if I can upscale I will message you with some pictures. Thanks Will
@@williamroberts9852 looking forward to seeing it completed! 👍🏻
Hi Chris and Zelda,
By the wonders of the Internet I found your business page!. I love your set up, and as I have a background in building trailers and garden rooms as well as signwrighting I would love to start a similar business in Northumberland. I wonder if you would mind if I contacted you for a few ideas. Kind regards Will
Hi Will, thanks for your lovely message, we're delighted you found something enjoyable in the videos. We essentially placed up these video's for folks who wanted the odd attraction to help them along, not a whole business to replicate our own, particularly as we cover the UK, but thanks for thinking of us!
@@amusementsrevisited Thanks for your reply, sorry I didn't realise you were nationwide!, completely appreciate that would not be something you can help with 😁. Looking forward to more of the videos, currently I work for a business selling Sheds Summerhouses and Garden rooms up here in Northumberland and as you can probably imagine customers can be cfar and few at this time of the year 😁, so your content would be well received. Thanks again Will
Thanks so much (and for understanding!)
Hello can I ask how did you do the side panels. How did you adapt them to the main upright with those big hinges please thanks
The side bits that say test your strength and the mighty striker bits
Hi there! Sorry for the delay. To add side panels, you’d need to get hold of 4 pieces of flat bar 30cm length 25mm x 6mm. Bolt half the bar to the side panel horizontally near the top and do the same a couple of feet further down. Then bolt and wing nut them on to the main panel. Hope that makes sense! 😬
Hello and thankyou for your reply back to me that makes sense to do it that way thankyou very much for that I will get photos if RUclips will allow me to and give you my progress on mine. Watching your videos has help me a lot and I've done it all by the book too. I've had mine out on a few occasions for charity events and I must say it is very popular 👍👍🙂🙂
Absolutely wonderful news! Thank you!