How does it works?? KNOW EVERYTHING ABOUT TANDEM PISTON..

Usually a reciprocating compressor’s piston is made up of light weight aluminum alloys. The important design criteria are that the weight of the piston must be as low as possible and also sufficiently strong enough to compress the hot air. It should also be of heat conducting material so as dissipate heat easily. The piston has number of grooves for piston rings which are fitted around piston for sealing and scrapping effects. The number of rings depends upon the pressure of compression and diameter of the piston. Also the different types of rings depend upon the type of lubrication. If the piston is splash lubricated, the piston will have an oil scrapper ring one or two in number. There are compressors where forced lubrication and cylinder lubrication types are used. When such types of lubrication system are adopted, care must be taken to prevent oil being carried over from the crank case. Thus two or more oil scrapper rings are used for scrapping the oil down towards the crankcase. The piston might be a normal type or it might also be of tandem type. A normal one is the type usually used for single-acting compressors. The tandem type of piston is used for double-acting compressors, where one side of the piston might be acting as first stage and the other side might be final stage or second stage. Other types of tandem pistons may be of the form where the piston might have a step connecting two different diameters, working on the compressing air on the same side..

[@rahuljadon7160]

Chief can you make video
On sewage treatment plant

[@marine-knowledge-basha]

Vl do for sure sir.. Pls give some time

[@jahedkn]

Gaining ur sharing knowledge brother.but i dont know how Actually suction delivery valve work in air Compressor .can u share how valve work?

[@marine-knowledge-basha]

Pls giv some time upload the requested vdo sir..

[@sachinaroshan5488]

Thank you sir, well explained

[@marine-knowledge-basha]

Thanks sir.. Keep supporting