cheapest 3 inch lift kit for a 1997 4runner

Поделиться
HTML-код
  • Опубликовано: 25 авг 2024
  • In this episode of junk bucket garage we see what the cheapest 3 inch lift kit from Amazon looks like on a 97 four runner. I try not to hurt myself but it doesn’t always work out that way. I also want you through a quick and easy air-conditioning system check, and charge. gotta stay cool on these 100 degree days. 

Комментарии • 47

  • @burnhags2572
    @burnhags2572 2 года назад +7

    Don’t forget to change the lower ball joints there the Achilles tendon on the third GEN also change out your radiator or it will corrupt your transmission cooling lines run through the transmission.

  • @maestrooscuro5299
    @maestrooscuro5299 2 года назад +2

    Glad I found you I love your humor it was great to watch this come together

    • @junkbucketgarage
      @junkbucketgarage  2 года назад

      i’m glad you enjoyed it. thanks for watching ✌️

  • @chrisgonzales2916
    @chrisgonzales2916 Год назад +1

    this post is one of the most informative ways for the job…. Thank you sir…. Hope you have more 3rd gen 4Runner videos coming soon

    • @junkbucketgarage
      @junkbucketgarage  Год назад

      thanks for watching. i’m always working on something different. i unfortunately traded the 4runner. but i’ll get another one i’m sure 👍

  • @BareRoseGarage
    @BareRoseGarage 2 года назад +1

    One 62 Customizing just sent me over, and glad he did.
    I hit that button up there to see more to come man!

  • @bernardomercado1111
    @bernardomercado1111 Год назад +1

    This was enjoyable to watch 😄 . Can't believe I watched the whole hr of this install . That's awesome. You guys are awesome. Definitely helped me on installing my lift kit thanks guys!

  • @anthonybannister5909
    @anthonybannister5909 4 месяца назад

    Enjoyed the video in Indiana - want to do the same lift on my 98 SR5! Only had it about a year but doing the timing belt and belts and water pump - dodged a bullet - didn’t break but it should have - looked bad but I love my girl !

  • @yepyep340
    @yepyep340 2 года назад +2

    Yes! congratulations to ya both. The animal cues are always on point!

    • @junkbucketgarage
      @junkbucketgarage  2 года назад +1

      thank you. the dogs especially think there super stars. 😂

  • @markjordan2659
    @markjordan2659 2 года назад +3

    Truck looks awesome. I would like to buy a 80 series or 100. I like how you handle your air ac. Good to see you didn't take bark off. Australia 🇦🇺.

    • @junkbucketgarage
      @junkbucketgarage  2 года назад

      sometimes you just gotta keep it simple and get it done. then hope it works🤣 thanks for watching.

  • @natebath5522
    @natebath5522 Год назад +2

    I love this guy 😂

  • @mauriceescobar8403
    @mauriceescobar8403 Год назад +2

    Man I’ve installed 3 of these kits and 2 things I’ve noticed. You don’t have to undo the upper ball joint and I never had to use spring compressors🤷🏼‍♂️

  • @maestrooscuro5299
    @maestrooscuro5299 2 года назад +1

    Lower and upper ball joints are a must

  • @coreylynch31
    @coreylynch31 Год назад +1

    Jack under the opposite brake drum helps to torque the axle to get the spring in.

  • @HarleyRunner
    @HarleyRunner 8 месяцев назад +1

    He throws the rough country sticker "in the tube" hahaha

  • @dangda-ww7de
    @dangda-ww7de 2 года назад +1

    I feel your pain man, i also got a 3rd gen 4runner and a tundra 2007, lucky i didnt replace the starter yet.

    • @junkbucketgarage
      @junkbucketgarage  2 года назад

      there so good. but there’s some things that make you wanna kick an engineer. 😂

  • @moparnut6286
    @moparnut6286 2 года назад +2

    Cool channel subbed....one 62 customizing sent me.

    • @ottohansen4008
      @ottohansen4008 2 года назад +1

      that’s great to hear. hope you enjoy. 👍

  • @cbaz812003
    @cbaz812003 Год назад

    Keep on keeping on!

  • @irakaplan3340
    @irakaplan3340 7 месяцев назад

    Recall on the rear end of the 1997 if they haven’t been done? Toyota did mine for free

  • @kyote1r77
    @kyote1r77 Год назад +1

    Thank you for the good video, do you have a link for the Amazon lift kit, i wanna check it out for my 2000 4runner

  • @andrijanijebitno4309
    @andrijanijebitno4309 Год назад +1

    I have question my toyota 4runner fall on left front side for like 2 inch do you know why?

    • @junkbucketgarage
      @junkbucketgarage  Год назад

      if all the ball joints are good i’d think a spring has failed. inspection using both sides for comparison should find something. good luck. thanks for watching

  • @juangaitan5450
    @juangaitan5450 Год назад

    Can the arrows or spheres be damaged with the amigo front sight kit?

  • @rickroel4994
    @rickroel4994 Год назад +1

    Why didn’t you just replace the front strut assembly?

  • @chrisgonzales2916
    @chrisgonzales2916 Год назад +1

    How did you address the rear driver side sag? I installed this exact kit, my driver side has about a 7/8 inch sag , very noticeable

    • @junkbucketgarage
      @junkbucketgarage  Год назад +1

      i was fortunate to not have this happen. i guess it’s from the gas tanks wieght on that side. before going to deep, maybe try swapping the springs side to side? i know some sping kits have two different weights of spring just for this. good luck.
      thanks for watching

  • @scottygrooms
    @scottygrooms Год назад +1

    Where can I get one of those red, white and blue hats?

    • @junkbucketgarage
      @junkbucketgarage  Год назад +1

      i’m gonna get some more hats made. when i do i’ll let u know. 👍 thanks for watching

  • @ddemier
    @ddemier Год назад +1

    I have a 2001 Toyota 4runner Sr5 2wd and would like to lift it 2 inches. Will this Rough Country lift work on a 2wd as well?

    • @junkbucketgarage
      @junkbucketgarage  Год назад

      i don’t think so. but if you look it up it should tell you. good luck. thanks for watching

    • @ddemier
      @ddemier Год назад

      @@junkbucketgarage I tried looking it up and theres no clarification if the 4wd interchanges with 2wd. Thats why I was asking if you knew.

    • @junkbucketgarage
      @junkbucketgarage  Год назад

      oh okay. that’s weird. i don’t want to give you the wrong information and i just don’t know. i’ll try to look into it

    • @ddemier
      @ddemier Год назад +1

      @@junkbucketgarage how does the Rough Country perform on the roadways? Is it bouncy or rough riding? Still recommend RC lift kit?

    • @junkbucketgarage
      @junkbucketgarage  Год назад +1

      i’m very happy with it.

  • @N530SYF
    @N530SYF Год назад

    Technically it's only 2.5 inch in the front and 3 in the rear. I have the same kit for about 3yrs now and finally upgraded to a true 3inch lift which requires some more parts in the front end.

  • @RednecksGoneWild
    @RednecksGoneWild 7 месяцев назад

    next time go to youtube university before you do this ,lol