Great video! Yes, I love the sq series. I personally prefer mix groups over dca on my "control layer "especially for drum and gtr, for the very reason that gives one last places to control my compression and eq before I send to my main L/R
That's a great way to do it! I've run into a problems with less-experienced volunteers getting tripped up by group compression, so it's not my first recommendation.
Hey there! I was wondering if you could give a tutorial on how to set up the M32 with the DL 32. I love watching your videos and would really appreciate it!
20:45 - spot on about transition moments. We're not yet on a digital board (please!) but, as a more liturgical church, have an awful lot of transition moments. Looking at last week's running order, we transitioned from pastor to band, or vice versa, ten times in the course of the service. And then other transitions *between* speaking mics. Those are always where the minor blemishes occur.
@@AttawayAudio Yeah, we've got one sub-mix to play with, which does help a little. The whole setup isn't really geared up for how we're now using the building and our current musical style.
One technical note, the IP address rules are a bit more complex, but for the usual usecase make sure that the same numbers are used for all fields where the subnet mask, in your case its 255.255.255.0, so the first THREE numbers need to match. Oh and do not use 0 or 255 for the last number as this wont work ;)
Hello. I want to mix several guitars into the SQ5 and they all have jack cables! The SQ5's input jacks are XLR. How do I proceed in this situation? The Qu-16 has both XLR and Jack, why did they drop it on the SQ5?
Love the content. You have any videos or recommendations on recording from mixer to computer. I have qusb and the ab168 dsnake. I would like to record all 32 channels. Qusb only allows me to record 16 channels.
The only this that bugs me about this console so far is the scribble strip. if the SQ5 still supports waves SoundGrid card then its the sweet spot for compact mixers.
@@AttawayAudioI’m moving from Presonus SL iii to A H SQ5 for technical reasons. Mostly due to network and expansion cards. I can’t seem to find video on the SQ/waves superrack performer or Live professor setups. On the Studiolive I could not send signal to superrack and return in to the same champ when using NSB stage boxes. I wonder if AH SQ does things differently before I make another investment.
Oh no, you skip the most important part that I want to learn, the Outputs. How do you set it up with the stage box and how do you make buses, and matrix, also the cross over for speakers and subs. Also the out put for inear. Thank you, James.
Just wanna thank you for the efforts you put into making us better sound people
It's my pleasure! I'm just glad you're out there doing the real work :)
Thank you for this! I can’t wait for the videos where you dive deeper into what the SQ can do.
Coming soon!
I have been waiting for this 🙌
Yes! Thank you! I’ve been waiting
Great video! Yes, I love the sq series. I personally prefer mix groups over dca on my "control layer "especially for drum and gtr, for the very reason that gives one last places to control my compression and eq before I send to my main L/R
I often assign groups to DCAs on my sq5. Best of both worlds.
That's a great way to do it! I've run into a problems with less-experienced volunteers getting tripped up by group compression, so it's not my first recommendation.
"IP addresses in the same zip code" - wonderful turn of phrase!
I owe that one to Samantha Potter, co-host of Church Sound Podcast.
Love our SQ6. Amazing board!
Commenting for the algorithm.
Hey there! I was wondering if you could give a tutorial on how to set up the M32 with the DL 32. I love watching your videos and would really appreciate it!
20:45 - spot on about transition moments. We're not yet on a digital board (please!) but, as a more liturgical church, have an awful lot of transition moments. Looking at last week's running order, we transitioned from pastor to band, or vice versa, ten times in the course of the service. And then other transitions *between* speaking mics. Those are always where the minor blemishes occur.
Yeah that's tricky. Does your board have groups or VCAs? Those could be helpful for fading in/out different things.
@@AttawayAudio Yeah, we've got one sub-mix to play with, which does help a little. The whole setup isn't really geared up for how we're now using the building and our current musical style.
One technical note, the IP address rules are a bit more complex, but for the usual usecase make sure that the same numbers are used for all fields where the subnet mask, in your case its 255.255.255.0, so the first THREE numbers need to match. Oh and do not use 0 or 255 for the last number as this wont work ;)
Thanks for filling in those details for everyone. I definitely have a lot to learn when it comes to IP/IT
Yes! Just got an Sq6 for our church
Congrats on the new gear!
Great board!
Hello. I want to mix several guitars into the SQ5 and they all have jack cables! The SQ5's input jacks are XLR. How do I proceed in this situation? The Qu-16 has both XLR and Jack, why did they drop it on the SQ5?
Love the content. You have any videos or recommendations on recording from mixer to computer. I have qusb and the ab168 dsnake. I would like to record all 32 channels. Qusb only allows me to record 16 channels.
Finally!!!!
Dropping 87... hard man)
@AttawayAudio between the A&H SQ(6) and Presonus Studio Live 64S, which would you pick and why given you have featured both brands on the channel.
it depends on a lot more factors than I can fit in a comment :)
The only this that bugs me about this console so far is the scribble strip. if the SQ5 still supports waves SoundGrid card then its the sweet spot for compact mixers.
quick question, can I eq signal going into an effect like on the Presonus SL iii?
The FX sends do not have EQ on them, but the FX unit itself has a Parametric EQ, and most of the FX units have filters that are very useful.
@@AttawayAudioI’m moving from Presonus SL iii to A H SQ5 for technical reasons. Mostly due to network and expansion cards.
I can’t seem to find video on the SQ/waves superrack performer or Live professor setups.
On the Studiolive I could not send signal to superrack and return in to the same champ when using NSB stage boxes.
I wonder if AH SQ does things differently before I make another investment.
Would be nice to know how to set up.output
stay tuned and subscribe, that one's coming
Oh no, you skip the most important part that I want to learn, the Outputs. How do you set it up with the stage box and how do you make buses, and matrix, also the cross over for speakers and subs. Also the out put for inear. Thank you, James.
Though it doesn't answer ALL those questions specifically, this video helps get you started: ruclips.net/video/Cb7XhwzkNAg/видео.html